FLEXIVA™ COMPACT

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ Compact air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quadmode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance.

Customers can count on GatesAir for implementation. The company offers a range of support options from standard 24/7 telephone technical assistance and parts to installation, training, full system design and field maintenance contracts.

Main Features of Flexiva™ Compact
Power levels up to 3850 W Analog FM, 3100 W FM+HD
Broadband, frequency agile design 87.5 to 108 MHz requires no tuning or adjustments
Best-in-class power efficiency for lowest operating costs
Compact, space-saving, 2, 3 or 4RU design
State-of-the-art, direct-to-carrier digital modulator
Integrated stereo encoder
ITU-R BS412 peak program/multiplex power limiter
Static RDS generator
2 AES, 1 analog L/R and 2 composite program inputs with automatic failover switching
Digital MPX/Composite input over AES192 interface with fail-over switching
Operation over a wide range of voltage and power stability conditions
Operation at up to 1.5:1 VSWR with proportional foldback
Full remote control capability including:
Web-based HTML GUI interface
SNMP
Parallel control/monitoring
Extensive Fault, Warning and Operational parameter logging
N+1, dual transmitter and main/alternate; automatic switching capability
Optional Features
GPS receiver for SFN synchronization
Orban Optimod™ 5500H multi-band audio processor
Gen 4 HD Radio™ Exgine modulator card

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The GatesAir Flexiva™ FLX with PowerSmart® 3D is a Liquid-Cooled FM solid-state transmitter family that provides today’s broadcaster with a single transmission platform capable of analog and digital. Built on the next generation of GatesAir’s groundbreaking green transmission architecture, Flexiva transmitters offer today’s FM analog or digital broadcaster compact, energy-efficient solutions to reliably deliver high performance and reduce Total Cost of Ownership.

Flexiva FLX utilizes the latest 50 volt LDMOS amplifier devices, compact high-efficiency power supplies, variable speed cooling and the Flexiva FAX exciter with RTAC™.

Featuring PowerSmart® 3D technology, the Flexiva FLX line offers unmatched efficiency that makes it ideal for all FM applications. FLX provides today’s broadcaster with unparalleled power efficiency and outstanding signal performance.

This powerful blend of new technologies provides best-in-class performance with respect to transmitter power efficiency, physical size, performance and features. The modular design allows for simpler installation, infrequent maintenance requirements together with dramatically reduced total cost of ownership over the life of the transmitter.

Main Features of Flexiva™ FLX with PowerSmart® 3D
Featuring 4th Generation HD Radio Crest Factor Reduction and Adaptive Pre-Correction technology for the highest HD Radio™ power available.
Flexiva High Power Transmitter features identical power blocks for scalability. 10,000 Watts to 80,000 Watts
Small and compact. 10kW power blocks in 16 rack units
Variable speed coolant pumps and heat exchanger cooling fans maximize system efficiency
Common dual power amplifiers and IPA modules for all power levels simplifies spares
Single-phase or 3 phase power, Delta or Wye configurations. 190 to 464 VAC
1:1 Power supply to Power Amplifier module maximizes redundancy
Hot-Pluggable, hot-swappable power amplifier and power supply modules minimizes down-time and simplifies maintenance.
Simple, distributed hardware based control architecture uses analog circuits to control critical transmitter functions. Not reliant on a microprocessor for high reliability
Hardware based life support backup controller provides added robustness, reliability
Can use any standard FM exciter or can be tightly integrated with FAX low power exciter
Fully broadband, 87.5 to 108MHz — requires no tuning or adjustments.
Best-in-class power efficiency — lowest operating costs
Extremely high power density; compact and lightweight space-saving design
Latest state-of-the-art LDMOS-FET power amplifier technology, high efficiency (98%) auto ranging, hot-pluggable power supplies
Maintain power up to 1.5:1 VSWR with proportional VSWR fold-back above that for safe operation at reduced power into marginal loads (icy antenna etc.)
Automatic restart after AC mains interruption; returns to previous operational mode
Global control and monitoring via the World Wide Web remote graphic user interface (GUI) works with any PC, table or smart phone
Full SNMP network control and monitoring support
In-depth diagnostics and setup via an easy-to-use front panel control
Dual-drive with automatic failover exciter switching
FLX 10K Available Options

Internal or External pump system

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quad-mode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance. Customers can also count on GatesAir for implementation, and the company offers a range of support options from standard 24/7 telephone technical assistance and parts to installations, training, full system design and field maintenance contracts.

The Flexiva™ air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quad-mode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance. Customers can also count on GatesAir for implementation, and the company offers a range of support options from standard 24/7 telephone technical assistance and parts to installations, training, full system design and field maintenance contracts.

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ LX FM solid-state transmitter family provides today’s broadcaster with a no-compromise, cost-effective transmission platform with features previously only found in top-of-the-line products. Incorporating field-proven GatesAir technology, Flexiva LX transmitters deliver world-class performance, reliability and quality.
Flexiva LX is ideal for low power requirements, up to 1 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative RF amplification and software-defined exciter technology including powerful integrated multi-band audio processing to make your station stand out on a budget.

Featuring PowerSmart® technology, the Flexiva LX continues the legacy of unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lowers operating costs and reduced cost of ownership over the life of the transmitter.

Customers can count on GatesAir for implementation. The company offers a range of support options from standard 24/7 telephone technical assistance and parts to installation, training, full system design and field maintenance contracts.
Flexiva LX FM Transmitter Family Features:
Power levels up to 1050 W
Broadband, frequency agile design
87.5 to 108 MHz requires no tuning or adjustments
Hot-pluggable power supplies
Best-in-class power efficiency for lowest operating costs
Compact, space-saving, 2RU design
State-of-the-art, direct-to-carrier digital modulator
Integrated digital multi-band audio processor and stereo encoder with composite clipper
ITU-R BS412 peak program/multiplex power limiter
Dynamic RDS generator
AES, analog L/R and 2 configurable composite program inputs and outputs
Digital MPX/Composite input over AES192
Operation over a wide range of voltage and power stability conditions
Operation at up to 1.5:1 VSWR with proportional fold back
Full remote control capability including:
Web-based HTML GUI interface SNMP
RS-232
Parallel control/monitoring
Extensive Fault, Warning, and Operational parameter logging
Optional Powerful DSP based re-broadcast receiver

Connect » Real-Time Signal Transfer » Audio Interfacing & Conversion » Audio signal processing, routing and infrastructure »

Built on the proven, award-winning Intraplex® IP Link codec technology, GatesAir's Intraplex Ascent platform supports up to 32 audio channels with high-end features.

The scalability of Ascent makes it ideal for applications that require multiple channels of audio encoding and decoding at head-end sites. The high-density solution reduces cost and provides a path for convergence of IT and broadcast infrastructure. The interoperability between Ascent and IP Link codecs provides a complementary solution for remote contribution and distribution use cases.

Product Details

The Ascent platform continues the Intraplex tradition of providing an unprecedented level of reliability for audio over IP application. Built with enhanced network reliability and security in mind, Ascent supports the Dynamic Stream Splicing technology of IP Link codec, which provides “hitless” protection for packet losses using the combination of time and network diversity for packet transmission, and FEC.

To further enhance reliability and security, the platform supports the SRT protocol encapsulation. SRT (Secure Reliable Transport) is an open-source protocol that provides low-latency, reliable and secure streaming of audio and video data. The reliability in SRT is accomplished by a built-in packet re-transmission scheme; the security of streams is handled by the built-in AES-128/256 payload encryption.

In addition to “hitless” protection, like the IP Link codecs, the Ascent also supports automatic failover between different incoming streams or stored audio.

This combination of capabilities gives Intraplex codecs a market-leading position in STL over IP technology and unmatched network transport reliability.

Ascent supports both physical audio interfaces (AES3, Analog) and AES67 (AoIP), with a maximum of 16 full-duplex or a total of 32 channels (combination of encode and decode). Physical audio interfaces can be ordered as 4- or 8-channel cards, supporting both AES3 and analog audio signals.    The Ascent product is built on the Commercial-Off-The-Shelf (COTS) x86 architecture to leverage the scalability and cost of the technology. The product is available in a 1RU branded hardware server and as a software-only option.

Main Features of Intraplex® Ascent

• 4, 8, 16 stereo channels. Each channel can be full-duplex, encode-only or decode-only


• Supports AES3, Analog and AES67 audio input and outputs


• Standard Coding: Linear, Opus


• Optional: AAC-HE, AAC-HEv2, AAC- ELD, AAC-xHE, MPEG 2 and MPEG 3 audio coding


• Protocol Encapsulation: Real-time Transport Protocol (RTP), Secure Reliable Transport (SRT)


• Streams: Multicast, unicast, and multi-unicast


• 10 streams per channel with up to 20 destinations per transmit stream; maximum of 100 streams per system


• Three independent IP interfaces for redundant network operation


• Built-in silence sensor with optional stream switchover


• Automatic backup to audio playout from USB drive or external audio source


• Multicoding: can encode the same audio source in multiple formats


• Prioritized stream sources at the output with automatic switch over and switch back between primary and secondary streams and backup sources (streams, USB, external audio source)


• Programmable RTP level Forward Error Correction (FEC) scheme


• Programmable time diversity and Interleaving of streams to combat burst packet losses


• Integrated scheduler for automated scheduled program switching


• Integrated with Intraplex LiveLook (network analytics and monitoring software)


• Web and SNMP for management


• Multiple web account types to restrict access


• GPIOs: up to 32 in, 8 out. Available for stream transport and alarm assignment


• Network reliability
  
  
  
  • Dynamic Stream Splicing with network and time diversity for “hitless” packet loss protection
  
  
  • Programmable RTP level Forward Error Correction (FEC)
  
  
  • Secure Reliable Transport (SRT): new protocol provides automatic packet retransmission method
  
  
  
  


• IP Security
  
  
  
  • Access control per interface
  
  
  • Encryption of streams with AES-128
  
  
  
  

Connect » Provide Connectivity » Access Connectivity »

The next generation of digital STL
Our challenge: to design a studio-to-transmitter link (STL) for your most demanding 950 MHz applications — one as reliable and robust as Intraplex® T1 and IP audio links. Digital STL manages much more than audio, so installation and configuration need to be straightforward, not a science project. Data should not be optional, requiring additional boxes and complexity. Your STL should be ready, out of the box, for AM, FM and HD Radio™, as well as future multimedia applications.

Earlier digital STLs were not designed for IP data transport. Adding IP data to them required optional modules and external add-ons, and many engineers working on HD Radio installations reported spending much time and money trying to eliminate glitches.

Our solution: HD Link™ is designed to manage all HD Radio™ transport scenarios, regardless of where you place your importer and exporter. Its two prioritized Ethernet paths give preference to HD Radio™ data over control and other LAN/WAN data. It supports both UDP and TCP, and even handles the switching of TCP return packets over asymmetric IP paths with plug-and-play simplicity.

HD Link offers RF power to spare, an integrated IP gateway with sophisticated data handling capabilities, and multiple channels of audio. The intuitive front panel and remote interfaces tap into the most complete feature set of any microwave STL, yet take less time to configure. It can even operate on both RF and IP simultaneously, and allows automatic backup of all services from one to the other.

Intraplex is broadcasting’s first choice for rock-solid, full-time operation of T1 STLs. With HD Link, you can now count on the same dependable performance, superior support and long-term value for your microwave links.

Connect »

The Intraplex® IP Link family of IP audio codecs provides high-end features at an affordable price. Offering an array of audio coding options along with IPConnect technology for data tunneling, the IP Link codecs are suitable for use in Studio-to-Transmitter Links (STLs) as well as audio contribution and distribution networks. Support for IP multicast and multiple unicast streams enables one encoder to feed multiple decoders.

By incorporating three IP Interfaces that can be used for streaming and management, the IP Link systems can provide a level of reliability not seen in comparably-priced codecs.

As the latest additions to the Intraplex line of data transport products, the IP Link family of audio codecs bring legendary Intraplex reliability to the IP codec market.

IP Link 100/100p: Single bidirectional stereo audio channel IP Link 200: Two bidirectional stereo audio channels IP Link 200A: Two bidirectional stereo audio channels with one channel being AES67 Standard: Linear, AAC-LC, Opus and G.722 audio coding Optional: AAC-HE, AAC-HEv2, AACELD, MPEG2, MPEG3 and Enhanced aptX audio coding Optional: Automatic audio loudness leveling and metering compliant with EBU R-128 and ITU-R Optional: IPConnect capability to reliably transport external IP packets Other transport modes: Transparent AES up to 192 kbps to support composite FM multiplex signal over AES Protocol Encapsulation: RTP, SHOUTcast/Icecast, MPEG-TS Three independent IP interfaces for redundant network operation Optional redundant power supply: 12VDC or 48VDC Built-in silence sensor with optional stream switch over Automatic backup to audio playout from USB drive or external audio source Multicoding can encode the same audio source in multiple formats for STL, backup, and web streaming Optional Dynamic Stream Splicing providing “hitless” operation and T1/ E1 circuit like performance on less predictable IP networks Prioritized stream sources at the output with automatic switch over and switch back between primary and secondary streams and backup sources (streams, USB, external audio source) Programmable RTP level Forward Error Correction (FEC) scheme Programmable time diversity and interleaving of streams to combat burst packet losses Integrated with Intraplex IP Link Scheduler for automated scheduled program switching Integrated with Intraplex LiveLook (network analytics and monitoring software) N+1 redundancy with integrated control of external switching equipment IP Link 200/200A/100p: SynchroCast™ option provides dynamically managed precision delay for Single Frequency Network (SFN) broadcasting and simulcasting Support for IP multicast and multi-unicast Web browser user interface and SNMP network management Eight multipurpose contact closure inputs and outputs provide: Transport of logic signals with time-alignment to audio Stream control Alarm notification

Connect »

Intraplex® IPConnect is an IP networking gateway solution for fortification of mission-critical communication across wide area networks
IPConnect solves the problem of reliable transport across complex networks that traditionally suffer data loss through dropped packets. IPConnect provides an added layer of reliability for many types of IP traffic such as HD Radio, DAB/DAB+, or DRM by employing a combination of packet protection schemes with network/time diversity and packet-level forward error correction. Additionally, IPConnect can bridge local area network (LAN) segments across wide-area networks with seamless tunneling to enhance reliability of program and signal transport across large geographical regions with multiple receiving and transmitting sites.

With its three network interfaces, IPConnect’s data gateway provides extra protection through packet encapsulation, which encloses external IP data packets in a GatesAir protocol wrapper as it moves across IP networks. IPConnect provides this protection for studio-generated data, as well as IP data from external sources. While the former might include RDS data or SNMP control signals to trigger a command at the transmitter site, the latter may incorporate program or control data coming from a network operations center, satellite feed or advertising service.

As the next-generation member in GatesAir Intraplex family of IP codecs, the award-winning IPConnect leverages the strengths of previous IP Link codecs—including GatesAir’s patented Dynamic Stream Splicing (DSS) technology to mitigate IP packet loss, eliminate off-air time, and optimize stream reliability.

Support » Monitoring, Control & Communications » System Monitoring & Control » Data-driven analysis and self-healing »

GatesAir’s Intraplex® LiveLook application for IP Link, NetXpress™, and HD Link™ provides advanced network analytics and monitoring capabilities at an affordable price. It is an invaluable tool for optimizing and monitoring network performance. Broadcasters are increasingly using IP networks for audio contribution and distribution. While IP networks provide clear benefits for both cost and flexibility, there are network impairments which must be overcome to realize the reliability required for broadcast application. While the Intraplex® IP Link platform provides several packet loss mitigation techniques, it is essential to understand the patterns of packet losses as well as other impairments on the network connection to optimize these techniques.

Intraplex LiveLook provides both a real-time analytics as well as a monitoring and notification platform for the IP Link audio codec systems. The analytics capability of LiveLook uses Burst Packet Loss modeling technique to analyze the patterns of packet losses, which is then used by the internal decision tree to provide recommendation on the most effective packet loss mitigation technique of the IP Link to apply.

The monitoring capability can simultaneously collect long-term statistics on multiple audio streams, which can be used for historical analysis. The notification capability creates a separate alarm log for each audio stream and can optionally send email notification to the user on the state of the audio stream.

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Digital TV transmitters »

GatesAir's Maxiva OP Series of air- and liquid-cooled transmitters are available in several versions with output powers ranging from 200W to 43kW average DTV power, or up to 84kW peak sync with analog modulation.

The Maxiva OP Series transmitter system comprises several sub-parts:

• An exciter (dual drive is optional), with Real-Time Adaptive Pre-correction, and multiple input interface options (ASI, T2MI, ETI, EDI, IP, Satellite) and an optional onboard GPS / GLONASS receiver for accurate synchronization and SFN timing;


• One or more Power Amplifier modules (Stand-alone single PA systems and from 2 to 8 per rack depending on model and the output power level);


• A control and monitoring unit, with embedded change-over system;


• An innovative, high-efficiency air-cooling or liquid-cooling system.

Maxiva OP Series transmitters support several digital modulation standards (DVB-T, DVB-T2, ISDB-T/Tb, DAB/DAB+, ATSC, and PAL/NTSC Analogue standards.  Dualcast systems are also available.

Maxiva OP Series transmitters incorporate innovative World-class engineering, providing unparalleled AC-to-RF efficiency, performance, ease-of-use, and low maintenance costs.

Main Features of Maxiva™ OP Series

• Compact design: Lower power systems are stand-alone 2+1 RU or 3+1 RU 19” rack-mount.  Larger systems include one or more 36RU or 42RU equipment racks.


• A wide range of output power levels and configurations are available suiting all needs worldwide


• Doherty high-efficiency wideband or broadband amplifier technology, available in UHF, VHF Band III, and VHF Band I


• Built-in ASI/RF matrix for automatic exciter switch-over, without the need of using an external switchover unit


• DVB-T, DVB-T2, ISDB-T/Tb, DAB/DAB+, ATSC, NTSC, and PAL (with NICAM) modulations are fully supported


• Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb


• Real-Time Adaptive Pre-correction


• Optional onboard high stability GPS / GLONASS receiver with battery


• Flexible input interfaces available:
  
  
  
  • 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input
  
  
  • 2 x ASI inputs and 2 x Gigabit Ethernet
  
  
  • 4 x ETI or 2 x ETI + 2 x EDI inputs
  
  
  • 3 x ETI inputs
  
  
  • 1 x DVB-S/S2 Satellite Receiver input
  
  
  • 1 x RF input
  
  
  
  

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Digital TV transmitters »

GatesAir’s award-winning product, the new Maxiva™ IMTX-70 Intra-Mast Transmitter, is a very compact modular multi-transmitter system.  It has been scaled to allow installation within typical hollow mast/tower structures, or vertical poles.  This tower structure itself provides complete protection from the outside environment, while allowing heat dissipation via convection, plus forced air cooling through the unit.

The diminutive dimensions of the Maxiva IMTX-70 chassis are key to this unique design. Measuring only 230 x 485 x 320 mm, it allows installation into a wide variety structures. Access is via a lockable and sealed door. Cooling air is provided by vertical air convection within the mast structure, complemented by small fans inside the chassis.

Although extremely compact in size, the Maxiva IMTX-70 boasts many features normally found in full-size systems, including the capability of housing up to six separate transmitter modules, each with up to 70W of average DTV power. Each module can be configured as a transmitter, translator, or on-channel gap-filler with echo-cancellation, using optional input cards. A DVB-S/S2 satellite receiver option is also available as well as GbE (TS over IP), ASI, T2MI, SMPTE-310M, and ETI inputs. Digital modulations are supported include; ATSC, DVB-T, DVB-T2, and ISDB-T. For ISDB-T/Tb applications, an embedded Re-Multiplexer and Layer Combiner/TS to BTS, can be included.

The RF output stage is a high-efficiency Doherty broadband amplifier for energy savings and minimal waste heat. For added redundancy the Maxiva IMTX includes dual redundant power supplies, configurable as 2 x DC, 2 x AC or 1 AC plus 1 DC. Remote control includes SNMP and a Web interface.

Main Features of Maxiva™ IMTX-70

• Compact chassis: 230 x 485 x 320 mm


• Up to 6 separate transmitter modules


• Output power:  Up to 70W rms per module


• Input interface options for each module:


• ASI, BTS, T2MI, SMPTE-310M, ETI


• Gbe port (TS over IP)


• DVB-S/S2 Satellite Receiver input (including CAM interface)


• RF receiver input for transposer/gap-filler configuration


• Supports DVB-T/H, ISDB-T/Tb, DVB-T2, DAB/DAB+, ATSC modulations


• Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb


• Adaptive pre-correction circuits


• High stability GPS / GLONASS receivers with battery


• Option for 2 x hot swappable power supplies, 2 AC or 2 DC and/or AC/DC


• SNMP, Web Interface and Touch Screen display


• RF combiner option for multiple transmitter systems

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Digital TV transmitters »

GatesAir’s new Maxiva™ PMTX-1, is a complete self-contained, outdoor transmitter system. Housed in a completely environmentally sealed enclosure, the PMTX-1 includes many options, allowing configuration flexibility for many applications. The unit is capable of being configured as a Transmitter, Transposer (Translator), or an On-Channel Gap-Filler. Waste heat is efficiently dissipated via the metal housing and heatsink. This allows the unit to be mounted on a variety of structures, including tower, legs, poles, or building walls. For regions with extreme climate conditions, options for ambient air temperatures up to +50°C (122°F) and down to -40°C (-40°F) are available.

The compact dimensions (351W x 224D x 460H mm) of the Maxiva PMTX-1 chassis are key to this unique design, allowing installation on a wide variety of outdoor poles, or mast structures. Access is via a lockable and sealed door. The sealed metal housing of the PM-TX-1has been engineered to remove heat efficiently from the internal circuitry. The unique design of the PMTX-1 provides a high level of installation versatility, allowing it to be installed on virtually any suitable outdoor structure.

This versatile unit does not require a building, shelter or any additional outdoor enclosure. The totally sealed metal case has been designed specifically for outdoor environmental conditions, providing protection from all humidity levels, precipitation and wide temperature extremes.

The unit can be configured and operated as a 50W digital / 100W analogue transmitter, transposer or an on-channel gap-filler, with various input options. A satellite receiver card with CAM slot is also available. The unit includes an internal mask filter. The external power source requirement is 36-72 VDC (positive or negative).

 

Main Features of Maxiva™ PMTX-1

• Compact chassis: 351W x 224D x 460H mm


• Outdoor, pole-mounted, using adapter plate


• Output Power (Post-Filter): 50W rms Digital or 100W analogue


• Input interface options:
  
  
  
  • ASI, BTS, T2MI, SMPTE-310M, ETI
  
  
  • Gbe port (TS over IP)
  
  
  
  


• DVB-S/S2 Satellite Receiver input (including CAM interface). 4 slots available.


• RF receiver input for Transposer/Gap-Filler configuration (Direct Conversion – zero IF)


• Regenerative receiver input option for Transposer


• Supports DVB-T/H, ISDB-T/Tb, DVB-T2, ATSC & Analogue modulations


• Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb


• Adaptive pre-correction circuits


• Optional High stability GPS / GLONASS receiver with battery


• SNMP, Web Interface and Touch Screen display


• RF combiner option for multiple transmitter systems

Support » Monitoring, Control & Communications » Test & Measurement » Test and measurement equipment and software »

Maxiva™ StreamAssure provides broadcasters and network operators with a centralized platform for monitoring transport streams, transmitter parameters and modulated RF, to ensure full compliance with standards and customer Quality of Experience. This cloud-based system allows on-premises and off-site, managed service-based monitoring of physical, transport and audio/video streams from a single dashboard. This simplifies the traditional component-based architecture that traditionally employs disparate monitoring systems to understand network-wide performance.

Rapid isolation of performance issues across signal transport and RF infrastructure is another key value proposition for broadcasters. The ability to separately analyze multiple IP, ASI and other streams ahead of the transmitter versus the RF and decoded audio/video streams coming out allows users to quickly identify and address the source of the problem

The StreamAssure system is fully scalable from a single transmitter deployment to a large-scale network, comprising a vast number of sites deployed over a wide geography.

Options are available from an simple and economic monitoring solution to a comprehensive end-to-end system, including compliance recording and streaming.

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Digital TV transmitters »

The new Maxiva UAXT/VAXT Multi-Compact family of UHF & VHF solid-state Transmitters, Transposers (Translators) and on-channel Gap Fillers expands upon the proven foundation of GatesAir low-power systems and PowerSmart® high-efficiency technology.Today’s broadcasters and network operators are continually searching for more efficient and economical approaches for providing reliable  over-the-air transmission.  When several DTV channels can be consolidated into one common transmission site, the cost and space requirements for individual equipment per channel can often be very significant. The innovative Multi-Compact architecture allows the possibility of many configurations, with up to 8 independent low power transmitters, transposers or gap fillers, to be configured into a single space-saving chassis. The Maxiva Multi-Compact provides pre-filter power levels up to 15W per module, in a compact and convenient 4RU 19” rack mount package.

Designed for digital or analog broadcasting, the Maxiva Multi-Compact is a platform available in Transmitter, Transposer or SFN Gap Filler configurations for DVB-T/H, DVB-T2, ATSC, ATSC-MDTV, ISDB-Tb and analog networks. The Maxiva Multi-Compact can be configured  for up to 8 independent systems, or as N+1, N+2 or N+1/M+1 configurations.Instead of investing into several separate transmitter units, as well as complex and costly redundancy management systems, broadcasters or network operators can now simply invest into a single 4RU Multi-Compact transmitter and operate up to 7 channels with +1 redundancy in a single compact unit.

Main Features of Maxiva™ UAXT Multi-Compact / VAXT Multi-CompactMaxiva Multi-Compact Platform:

• Up to 15 Watts average power per module


• High efficiency broadband amplifier technology


• Extremely compact 4RU 19” rack mount chassis


• Single chassis configurable for up to 7+1, or 6+2 redundancy configurations


• Several Input interfaces for each transmitter module:
  
  
  
  • 1 x ASI input (TS, BTS, T2MI, SMPTE-310M)
  
  
  • 1 x GbE input (TS over IP)
  
  
  • Optional:  1 x DVB-S/S2 Satellite Receiver input  per slot (including CAM interface and multi-stream capabilities)
  
  
  • Optional: 1 x RF receiver input for repeater/gap-filler configuration
  
  
  
  


• DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC and analog modulations fully supported


• Embedded ASI and RF Matrix for redundancy management of each transmitter module


• Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb


• Adaptive pre-correction circuits


• 2 x hot swappable high stability GPS / GLONASS receivers with battery


• 2 x hot swappable power supplies


• SNMP, Web Interface and Touch Screen display

UAXT / VAXT Multi-Compact – Primary Components

• Multi-Compact Chassis, 4RU, with 8 slots, to be fitted with plug-in transmitters/transposer/gap filler modules for N+1 or N+2 configurations.  Includes 1 power supply, 1 GPS / GLONASS receiver and RF output matrix.


• 15 W UHF Digital TV transmitter plug-in module., with 1x ASI, 1x GbE inputs and ASI matrix (up to 8 per chassis)


• 15 W UHF Digital TV transposer/gap-filler plug-in with echo cancellation

Standard Options & Accessories

• Redundant power supply option (Hot-swappable unit)


• Redundant GPS / GLONASS receiver option (Plug-in board)


• 26 dB LNA GPS / GLONASS antenna. includes mounting kit and 25 meters coaxial cable


• DVB-S/S2 integrated receiver board per slot, single and multi-stream, with CAM slot


• RF integrated receiver board for transposer/gap-filler operation


• DVB-S/S2 integrated input matrix for N+1 or N+2 configuration


• RF integrated input matrix for N+1 or N+2 configuration


• Software option for ISDB-Tb Remux/Layer combiner/ TS to BTS (188 to 204 byte) converter


• Dual-cast software option, adds DVB-T modulation


• Dual-cast software option, adds DVB-T2 modulation


• Dual-cast software option, adds ISDB-T modulation


• Dual-cast software option, adds ATSC modulation

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog TV transmitters »

The new Maxiva UAXT & VAXT Ultra-Compact family of UHF solid-state Transmitters / Transposers (Translators) and on-channel Gap Fillers expands upon the proven foundation of GatesAir low-power systems and PowerSmart® high-efficiency technology.  It provides today's digital broadcaster with a suite of compatible products to accommodate any coverage application, along with unmatched performance, reliability and quality.

The Maxiva Ultra-Compact family further extends the capabilities of the Maxiva series, providing a single family of transmission products capable of satisfying any coverage architecture.  The Maxiva Ultra-Compact provides pre-filter power levels up to 1,000W, in exceptionally compact and space-saving 1RU, 2RU and 3RU packages.

Designed for both analogue and digital broadcasting, the Maxiva UAXT/VAXT Ultra-Compact is a platform available in Transmitter, Transposer or SFN Gap Filler configurations for DVB-T, DVB-T2, ATSC, ISDB-Tb, DAB/DAB+ and NTSC/PAL analogue networks. The Maxiva Ultra-Compact Series provides an ideal solution for extending market coverage and filling in coverage gaps in challenging situations, including busy urban areas that require greater building penetration.

The Maxiva UAXT & VAXT Ultra Compact family of Transposers and on-channel Gap Fillers provide efficient and reliable re-broadcast of the received signal in a space saving, reliable and robust package. The Gap Filler configuration adds a powerful echo cancellation feature to deliver exceptional on-channel performance. For ATSC (8-VSB) Gap Filler applications, a new on-channel Spectrum Restorer utilizing EDOCR technology provides unsurpassed performance.  This combination of products enables broadcasters to address any network coverage requirement.

Maxiva Ultra-Compact Platform:

• High-efficiency broadband amplifier technology


• Power levels up to 1,000W (pre-filter average power)


• Frequency agile broadband design (two bands):
  
  
  
  • UHF Band IV/V, 470 to 810 MHz
  
  
  • VHF Band III, 170-240 MHz
  
  
  
  


• Extremely compact, space-saving, 1RU, 2RU, and 3RU 19” chassis


• Full local/remote control capability including:
  
  
  
  • Local touch-screen display
  
  
  • Web GUI interface
  
  
  • SNMP
  
  
  
  

Transposer / Translator:

• Supports analog and digital standards


• Direct baseband conversion (zero IF) and fully regenerative conversion options available

SFN Gap Filler:

• Includes a powerful echo cancellation circuit, 15dB of Gain Margin


• Low processing delay, < 10 µS


• Cancellation window width 20  µS


• Selective cancellation window range 1.6 µS to 820 µs


• MER degradation <  2dB


• ATSC SFN Gap Filler is now realizable using GatesAir's (8-VSB) Spectrum Restorer

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog TV transmitters »

The Maxiva UAXTE is a compact air-cooled TV transmitter that provides over the air delivery in the UHF spectrum. Built on GatesAir’s groundbreaking PowerSmart Plus architecture, the Maxiva UAXTE provides an energy-efficient, broadband solution to reliably deliver rich, high-quality multiformat content to viewers at home or on the move.

Optimized for International Markets
The Maxiva UAXTE utilizes the latest generation 50 volt LDMOS amplifier devices, new compact high-efficiency power supplies and the Maxiva Compact series exciter/driver along with real-time adaptive correction (RTAC) for outstanding signal performance. The Maxiva UAXTE power amplifiers have been optimized to provide the best possible performance and efficiency for both ATSC 1.0 and ATSC 3.0. The UAXTE transmitter is rate for identical average power levels for both modulations, assuring a simple and cost-effective upgrade path for future ATSC 3.0 operation. The modular design further simplifies installation and reduces maintenance costs, dramatically lowering the total cost of ownership over the transmitters life-cycle.
The Maxiva UAXTE with PowerSmart Plus is an efficiency-optimized UHF transmitter. This all-new design includes several energy saving features.

Up to 44% AC-to-RF efficiency
Simple and cost-effective upgrade path from ATSC 1.0 to ATSC 3.0 at the same power level.
Efficiency-optimized – for highest efficiency and lowest cost of ownership
Variable speed fans to intelligently save energy
Hot-swappable, compact, high-efficiency DC power supplies
Hot-swappable, compact, high-efficiency power amplifiers
Incorporates the XTE-based Maxiva Compact exciter/driver for best-in-class performance
RoHS compliant / CE compliant
Support for all worldwide digital modulation standards
Modular & upgradeable architecture
All-digital linear and nonlinear pre-correction: Real-Time Adaptive Correction (RTAC)
Rugged, reliable design and construction
Ideal for N+1 configurations since all transmitters are identical and use the same PA’s, minimizing spares requirements
Lowest energy usage
Minimum operating cost

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog TV transmitters »

The Maxiva ULXTE is a liquid-cooled TV transmitter that powers over-the-air delivery across the UHF television spectrum. Built on GatesAir’s groundbreaking PowerSmart® Plus architecture, Maxiva ULXTE offers today’s digital broadcaster the most compact, energy-efficient solutions to reliably deliver rich, high-quality multi-format content to viewers at home, or on the move.

Optimized for International Markets The Maxiva ULXTE transmitter utilizes the latest 50-Volt LDMOS amplifier devices, new compact high-efficiency power supplies and the new Maxiva XTE exciter with advanced real-time adaptive correction (RTAC) for outstanding signal performance.

The Maxiva ULXTE power amplifiers have been optimized to provide the best possible performance and efficiency for both ATSC 1.0 and ATSC 3.0. The ULXTE transmitter is rated for identical average power levels for both modulations, assuring a simple and cost-effective upgrade path for future ATSC 3.0 operation.

Modular designs simplify installation and reduce ongoing maintenance, dramatically lowering total cost of ownership over the life of the transmitter.

Main Features of Maxiva™ ULXTE with PowerSmart® Plus The Maxiva ULXTE with PowerSmart® Plus is the highest efficiency broadband UHF transmitter on the market.

Up to 45% AC-to-RF efficiency Simple and cost-effective upgrade path from ATSC 1.0 to ATSC 3.0 at the same power level New high-efficiency DC power supplies Integrated high-efficiency pump system for certain power classes Hot-swappable light-weight PA modules Hot-swappable compact DC power supplies Incorporates the newest technology Maxiva XTE exciter for best-in-class adaptive pre-correction and native IP transport inputs RoHS compliant / CE compliant Support for all worldwide digital modulation standards Modular & upgradeable architecture All-digital linear and nonlinear pre-correction: Real-Time Adaptive Correction (RTAC) Rugged, reliable design and construction Ideal for N+1 configurations since all transmitters can be identical and use the same PA’s, minimizing spares requirements Lowest energy usage Minimum operating cost

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Maxiva VAXTE is a compact air-cooled TV & DAB transmitter that provides over the air delivery in the VHF spectrum. Built on GatesAir’s groundbreaking PowerSmart Plus architecture, the Maxiva VAXTE provides an energy-efficient, broadband solution to reliably deliver rich, high-quality multiformat content to viewers at home or on the move.

Optimized for International Markets
The Maxiva VAXTE utilizes the latest generation 50 volt LDMOS amplifier devices, new compact high-efficiency power supplies and the Maxiva Compact series exciter/driver along with real-time adaptive correction (RTAC) for outstanding signal performance. The Maxiva VAXTE power amplifiers have been optimized to provide the best possible performance and efficiency for all modulations. For example, the VAXTE transmitter is rated for identical average power levels for 8-VSB and OFDM TV modulations, assuring a simple and cost-effective upgrade path for future ATSC 3.0 operation. The modular design further simplifies installation and reduces maintenance costs, dramatically lowering the total cost of ownership over the transmitters life-cycle.

The Maxiva VAXTE with PowerSmart Plus is an efficiency-optimized VHF transmitter. This all-new design includes several energy saving features.

Simple and cost-effective upgrade path from ATSC 1.0 to ATSC 3.0 at the same power level
Includes TSoIP / Native IP Transport inputs for ATSC 3.0 and DAB EDI interfaces
Efficiency-optimized – for highest efficiency and lowest cost of ownership
Variable speed fans to intelligently save energy
Hot-swappable, compact, high-efficiency DC power supplies
Hot-swappable, compact, high-efficiency power amplifiers
Incorporates the XTE-based Maxiva Compact exciter/driver for best-in-class performance
RoHS compliant / CE compliant
Support for all worldwide digital modulation standards
Modular & upgradeable architecture
All-digital linear and nonlinear pre-correction: Real-Time Adaptive Correction (RTAC)
Rugged, reliable design and construction
Broadband high-efficiency PA’s support redundancy and N+1 applications
Lowest energy usage
Minimum operating cost

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The new GatesAir Maxiva™ XTE exciter provides broadcasters with a powerful, software-defined platform, enabling the ultimate in performance, stability and durability.

Featuring unparalleled signal processing power, a smaller footprint and advanced Transport Stream over IP (TSoIP) input capabilities, Maxiva XTE builds upon a strong legacy of groundbreaking technological advances, pioneered by several decades of GatesAir innovations. Dramatically increased processing power together with new, advanced Real-Time Adaptive Correction (RTAC) techniques, provides optimum signal performance over a wide variety of modulations and RF amplifier topologies.

The Maxiva XTE supports a full range of digital broadcast standards, including ATSC, DVB-T/H, DVB-T2, ISDB-T, DTMB, DAB/DAB+/DMB. It is upgradeable to future new modulations, including ATSC 3.0, as they become available.

Main Features of Maxiva™ XTE
Advanced Real Time Adaptive Correction (RTAC)
Optimized correction for all amplifier types
Frequency Agile – Band I, III, IV and V
Supports all widely used TV standards and DAB/DAB+ radio
Upgradeable to emerging digital standards
Available Internal GNSS (GPS/GLONASS) receiver for precision frequency control and/or timing required for SFN
Available Internal UPS
Compact 1RU design
Dual redundant TSoIP inputs with seamless auto-switching
Dual redundant transport stream inputs with seamless auto-switching for ASI/T2MI
Integrated ISDB-Tb Remux
Seamless integration with GatesAir transmitters
Intuitive Web GUI interface with HTML
Advanced monitoring and diagnostics support

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Maxiva VAXTE is a compact air-cooled TV & DAB transmitter that provides over the air delivery in the VHF spectrum. Built on GatesAir’s groundbreaking PowerSmart Plus architecture, the Maxiva VAXTE provides an energy-efficient, broadband solution to reliably deliver rich, high-quality multiformat content to viewers at home or on the move.

Optimized for International Markets
The Maxiva VAXTE utilizes the latest generation 50 volt LDMOS amplifier devices, new compact high-efficiency power supplies and the Maxiva Compact series exciter/driver along with real-time adaptive correction (RTAC) for outstanding signal performance. The Maxiva VAXTE power amplifiers have been optimized to provide the best possible performance and efficiency for all modulations. For example, the VAXTE transmitter is rated for identical average power levels for 8-VSB and OFDM TV modulations, assuring a simple and cost-effective upgrade path for future ATSC 3.0 operation. The modular design further simplifies installation and reduces maintenance costs, dramatically lowering the total cost of ownership over the transmitters life-cycle.

The Maxiva VAXTE with PowerSmart Plus is an efficiency-optimized VHF transmitter. This all-new design includes several energy saving features.

Simple and cost-effective upgrade path from ATSC 1.0 to ATSC 3.0 at the same power level
Includes TSoIP / Native IP Transport inputs for ATSC 3.0 and DAB EDI interfaces
Efficiency-optimized – for highest efficiency and lowest cost of ownership
Variable speed fans to intelligently save energy
Hot-swappable, compact, high-efficiency DC power supplies
Hot-swappable, compact, high-efficiency power amplifiers
Incorporates the XTE-based Maxiva Compact exciter/driver for best-in-class performance
RoHS compliant / CE compliant
Support for all worldwide digital modulation standards
Modular & upgradeable architecture
All-digital linear and nonlinear pre-correction: Real-Time Adaptive Correction (RTAC)
Rugged, reliable design and construction
Broadband high-efficiency PA’s support redundancy and N+1 applications
Lowest energy usage
Minimum operating cost

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The new GatesAir Maxiva™ XTE exciter provides broadcasters with a powerful, software-defined platform, enabling the ultimate in performance, stability and durability.

Featuring unparalleled signal processing power, a smaller footprint and advanced Transport Stream over IP (TSoIP) input capabilities, Maxiva XTE builds upon a strong legacy of groundbreaking technological advances, pioneered by several decades of GatesAir innovations. Dramatically increased processing power together with new, advanced Real-Time Adaptive Correction (RTAC) techniques, provides optimum signal performance over a wide variety of modulations and RF amplifier topologies.

The Maxiva XTE supports a full range of digital broadcast standards, including ATSC, DVB-T/H, DVB-T2, ISDB-T, DTMB, DAB/DAB+/DMB. It is upgradeable to future new modulations, including ATSC 3.0, as they become available.

Main Features of Maxiva™ XTE
Advanced Real Time Adaptive Correction (RTAC)
Optimized correction for all amplifier types
Frequency Agile – Band I, III, IV and V
Supports all widely used TV standards and DAB/DAB+ radio
Upgradeable to emerging digital standards
Available Internal GNSS (GPS/GLONASS) receiver for precision frequency control and/or timing required for SFN
Available Internal UPS
Compact 1RU design
Dual redundant TSoIP inputs with seamless auto-switching
Dual redundant transport stream inputs with seamless auto-switching for ASI/T2MI
Integrated ISDB-Tb Remux
Seamless integration with GatesAir transmitters
Intuitive Web GUI interface with HTML
Advanced monitoring and diagnostics support

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ Compact air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quadmode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance.

Customers can count on GatesAir for implementation. The company offers a range of support options from standard 24/7 telephone technical assistance and parts to installation, training, full system design and field maintenance contracts.

Main Features of Flexiva™ Compact
Power levels up to 3850 W Analog FM, 3100 W FM+HD
Broadband, frequency agile design 87.5 to 108 MHz requires no tuning or adjustments
Best-in-class power efficiency for lowest operating costs
Compact, space-saving, 2, 3 or 4RU design
State-of-the-art, direct-to-carrier digital modulator
Integrated stereo encoder
ITU-R BS412 peak program/multiplex power limiter
Static RDS generator
2 AES, 1 analog L/R and 2 composite program inputs with automatic failover switching
Digital MPX/Composite input over AES192 interface with fail-over switching
Operation over a wide range of voltage and power stability conditions
Operation at up to 1.5:1 VSWR with proportional foldback
Full remote control capability including:
Web-based HTML GUI interface
SNMP
Parallel control/monitoring
Extensive Fault, Warning and Operational parameter logging
N+1, dual transmitter and main/alternate; automatic switching capability
Optional Features
GPS receiver for SFN synchronization
Orban Optimod™ 5500H multi-band audio processor
Gen 4 HD Radio™ Exgine modulator card

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ LX FM solid-state transmitter family provides today’s broadcaster with a no-compromise, cost-effective transmission platform with features previously only found in top-of-the-line products. Incorporating field-proven GatesAir technology, Flexiva LX transmitters deliver world-class performance, reliability and quality.
Flexiva LX is ideal for low power requirements, up to 1 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative RF amplification and software-defined exciter technology including powerful integrated multi-band audio processing to make your station stand out on a budget.

Featuring PowerSmart® technology, the Flexiva LX continues the legacy of unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lowers operating costs and reduced cost of ownership over the life of the transmitter.

Customers can count on GatesAir for implementation. The company offers a range of support options from standard 24/7 telephone technical assistance and parts to installation, training, full system design and field maintenance contracts.
Flexiva LX FM Transmitter Family Features:
Power levels up to 1050 W
Broadband, frequency agile design
87.5 to 108 MHz requires no tuning or adjustments
Hot-pluggable power supplies
Best-in-class power efficiency for lowest operating costs
Compact, space-saving, 2RU design
State-of-the-art, direct-to-carrier digital modulator
Integrated digital multi-band audio processor and stereo encoder with composite clipper
ITU-R BS412 peak program/multiplex power limiter
Dynamic RDS generator
AES, analog L/R and 2 configurable composite program inputs and outputs
Digital MPX/Composite input over AES192
Operation over a wide range of voltage and power stability conditions
Operation at up to 1.5:1 VSWR with proportional fold back
Full remote control capability including:
Web-based HTML GUI interface SNMP
RS-232
Parallel control/monitoring
Extensive Fault, Warning, and Operational parameter logging
Optional Powerful DSP based re-broadcast receiver

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The GatesAir Flexiva™ FLX with PowerSmart® 3D is a Liquid-Cooled FM solid-state transmitter family that provides today’s broadcaster with a single transmission platform capable of analog and digital. Built on the next generation of GatesAir’s groundbreaking green transmission architecture, Flexiva transmitters offer today’s FM analog or digital broadcaster compact, energy-efficient solutions to reliably deliver high performance and reduce Total Cost of Ownership.

Flexiva FLX utilizes the latest 50 volt LDMOS amplifier devices, compact high-efficiency power supplies, variable speed cooling and the Flexiva FAX exciter with RTAC™.

Featuring PowerSmart® 3D technology, the Flexiva FLX line offers unmatched efficiency that makes it ideal for all FM applications. FLX provides today’s broadcaster with unparalleled power efficiency and outstanding signal performance.

This powerful blend of new technologies provides best-in-class performance with respect to transmitter power efficiency, physical size, performance and features. The modular design allows for simpler installation, infrequent maintenance requirements together with dramatically reduced total cost of ownership over the life of the transmitter.

Main Features of Flexiva™ FLX with PowerSmart® 3D
Featuring 4th Generation HD Radio Crest Factor Reduction and Adaptive Pre-Correction technology for the highest HD Radio™ power available.
Flexiva High Power Transmitter features identical power blocks for scalability. 10,000 Watts to 80,000 Watts
Small and compact. 10kW power blocks in 16 rack units
Variable speed coolant pumps and heat exchanger cooling fans maximize system efficiency
Common dual power amplifiers and IPA modules for all power levels simplifies spares
Single-phase or 3 phase power, Delta or Wye configurations. 190 to 464 VAC
1:1 Power supply to Power Amplifier module maximizes redundancy
Hot-Pluggable, hot-swappable power amplifier and power supply modules minimizes down-time and simplifies maintenance.
Simple, distributed hardware based control architecture uses analog circuits to control critical transmitter functions. Not reliant on a microprocessor for high reliability
Hardware based life support backup controller provides added robustness, reliability
Can use any standard FM exciter or can be tightly integrated with FAX low power exciter
Fully broadband, 87.5 to 108MHz — requires no tuning or adjustments.
Best-in-class power efficiency — lowest operating costs
Extremely high power density; compact and lightweight space-saving design
Latest state-of-the-art LDMOS-FET power amplifier technology, high efficiency (98%) auto ranging, hot-pluggable power supplies
Maintain power up to 1.5:1 VSWR with proportional VSWR fold-back above that for safe operation at reduced power into marginal loads (icy antenna etc.)
Automatic restart after AC mains interruption; returns to previous operational mode
Global control and monitoring via the World Wide Web remote graphic user interface (GUI) works with any PC, table or smart phone
Full SNMP network control and monitoring support
In-depth diagnostics and setup via an easy-to-use front panel control
Dual-drive with automatic failover exciter switching
FLX 10K Available Options

Internal or External pump system

Publish » Linear Signal Distribution » Terrestrial Distribution Equipment » Analog radio transmitters »

The Flexiva™ air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quad-mode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance. Customers can also count on GatesAir for implementation, and the company offers a range of support options from standard 24/7 telephone technical assistance and parts to installations, training, full system design and field maintenance contracts.

The Flexiva™ air-cooled FM solid-state transmitter family provides today’s broadcaster with a single transmission platform capable of analog and digital operation. Incorporating field-proven GatesAir technology, Flexiva transmitters deliver world-class performance, reliability and quality.

Flexiva is designed for low- and high-power requirements, up to 80 kW, while utilizing the most compact design on the market today. Flexiva continues the legacy of the highly successful line of GatesAir FM transmitters and combines innovative, new quad-mode RF amplification and software-defined exciter technology to take FM transmission to the next level.

Featuring PowerSmart® technology, the Flexiva line offers unmatched efficiency that makes it ideal for all FM applications. The 50-volt LDMOS device technology delivers a dramatic increase in power density, lower operating costs and reduced cost of ownership over the life of the transmitter.

As the digital transmission leader, GatesAir has developed a solid core competency backed by years of experience in the complex technical areas that are essential for maximum transmitter performance. Customers can also count on GatesAir for implementation, and the company offers a range of support options from standard 24/7 telephone technical assistance and parts to installations, training, full system design and field maintenance contracts.