Hollyland Mars 400S SDI/HDMI Wireless Video Transmission System

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Xilinx Zynq UltraScale+ MPSoC devices provide 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing. Built on ARM real-time processors and a programmable logic equipped platform, three distinct variants include dual processor (CG) devices, quad processor and GPU (EG) devices, and video codec (EV) devices.

The Zynq UltraScale+ MPSoC EV devices are particularly suited to a wide range of broadcast and media applications, from camera encoding to mobile wireless video systems, and contribution IRDs to live streaming encoders:

• Configurable and dynamically adjustable codec


• Integrate with a wide portfolio of Xilinx and partner IP cores such as 12G-SDI, ST 2110, HDMI 2.0, DisplayPort 1.2 etc.


• Up to 4K60 4:2:2 10-bit H.264/H.265 encode + decode


• Multichannel support up to 4K60 (e.g. 2x 1080p60 or 4x 1080p30)


• Ultra-low-latency mode of <35ms glass-to-glass


• Total device power for a single pipeline as low as 8.5W

 

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The Mars 400S a  transmission range over 400ft with a clean line of sight (LOS) when the transmitter is connected to 1 or 2 receivers, supports up to 1080P 60Hz image resolution, and in the end, achieves full HD HDMI/SDI video transmission. The Mars 400S can be purchased from UBMS . Ubms can provide best price for Hollyland Mars 400S .

Mars 400S is using the latest coding, decoding technology, and 5G wireless transmission technology. It can achieve ultra-low latency wireless video transmission. It has a transmission range over 400ft with a clean line of sight (LOS) when the transmitter is connected to 1 or 2 receivers. Mars 400S is supports up to 1080P 60Hz image resolution. And Both transmitter and receiver equipped with L-series battery plate and also can power by DC. Buy Mars 400S from UBMS Dubai.

OLED Display Screen

Check out all device status and control the system with displayed information on the screen.

iOS & Android APP Monitoring

Support up to 4 APP connections while the transmitter is connected to 1 or none receivers.

Channel Scan

Scan current environment on the receiver to find out available channels and avoid the channels with interference.

Three Application Scene Modes

Prioritize your video shooting over video quality, or low latency, or the balance between the both when there is interference.

HDMI+SDI Interfaces

Provide HDMI and SDI devices connection options.

Low-Battery Warning Indicator

Keep you informed 30 minutes in advance before the battery dies.

Industrial Metal Case

Equipped with stable, reliable and durable metal case that avoids light external damages and easily cools the system down.

1 TX-I RX SETUP

This wireless HD video transmission system uses the latest wireless communication technology and transmits ultra-low latency HD video. The transmitter supports both HDMI and SDI input, while the receiver supports both HDMI and SDI output. It is configured with an OLED display screen and supports iOS & Android APP Monitoring. For the 1 TX to 1 RX connection, up to 4 application monitoring can be achieved.

Key Features

• Entry-level 1080p60 transmitter/receiver system


• 400' line-of-sight transmission


• SDI and HDMI input


• SDI and HDMI output


• Up to two receivers supported at the same time


• Wi-Fi transmission to up to four mobile devices using iOS/Android HollyView app


• Built-in L-series battery plates


• OLED display


• Low battery warning


• Channel scan function


• Scene mode selection

APPLICATIONS

• Indie Filmmaking


• Live Broadcasting


• Sports Activities


• Education Recording


• Wedding Ceremonies


• Corporate Events


• Buy Hollyland Mars-400s From UBMS Dubai

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Control your Canon PTZ cameras using IP or serial control with precision controls and a touchscreen display with the RC-IP100 Touchscreen PTZ Joystick Controller from Canon. The controller is compatible with the Canon CR-N300 and CR-N500 PTZ cameras and allows a single operator to control up to 100 cameras from a remote location. The 7" touchscreen provides configuration and camera settings control.

The IP100 is compatible with the proprietary Canon XC IP protocol, not a standard LAN, so you can create a private, secure network to control your cameras using the LAN port. It also features a second RJ45 port that allows you to control the cameras via RS-422 serial protocol. The bright 7" touchscreen allows you to control and configure up to 100 cameras and it can create and store up to 100 presets.

The precision joystick controls fine pan and tilt movements, and on the other side of the controller is a zoom rocker, providing an ergonomic layout to control pan, tilt, and zoom simultaneously with two hands. It also features four customizable buttons and knobs to make accessing settings and controls quick and easy. The DB-9 input/output port on the back allows you to monitor camera tally information. The unit is powered using a 12V barrel power adapter.

Control up to 100 Canon-Supported Cameras

The RC-IP100 controller provides IP control for 99 supported Canon PTZ cameras utilizing Canon's new XC protocol. Additionally, through the serial port, the CR-N500, CR-N300, and other legacy PTZ cameras that support the NU protocol can be simultaneously controlled.

Smooth PTZ Movement and Precise Control for Professional Productions

It's easy to achieve smooth PTZ movements with the accuracy and responsiveness of the joystick equipped on the RC-IP100. Camera operators could be confident when making on-air movements with the responsiveness of the controller, creating an effective video production.

Adjust PTZ and Change Camera Function Settings Remotely

Control, adjust, and set Pan, Tilt, and Zoom functions smoothly, register up to 100 presets per camera, and manage trace movement, picture quality settings, and much more with the advanced RC-IP100. The trace function can store camera movements for instant recall with a push of a button. Furthermore, the controller covers a wide range of functionality and customization and is a superb option for supported Canon PTZ cameras.

7" Touchscreen, Joystick, Zoom Lever, and 4 Customizable Buttons

The RC-IP100 Controller is equipped with a joystick, zoom lever, and large 7" LCD touch panel for intuitive operation. There are also two User and four Function buttons that are programmable for even more customization.

Buy Canon RC-IP100 Touchscreen PTZ Joystick Controller from UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Intended for photographers, videographers, cinematographers, and gaffers, the C-800 SpectroMaster Color Meter from Sekonic is an advanced field meter capable of reading virtually all light sources whether they're LED, flash, incandescent, HMI, fluorescent, or in the natural light spectrum. Most importantly, it's a practical lighting tool that analyzes the light source using 11 different display modes on its 4.3" color touchscreen, indicating specifically what you need to do to achieve your desired effect. The meter's CMOS sensor enables measurement in increments as fine as 1nm and allows capture of color spikes in the light output - an especially valuable function when working with LED, HMI, fluorescent lighting, and mixed sources. Perhaps the meter's most exciting addition is Spectral Similarity Index. Developed by the Sci-Tech Council of the Academy, SSI gives the user the ability to set any light as a standard, or use predefined standards (such as CIE D55), and then gives other lights an SSI score based upon how well they will match. The C-800 also includes TLCI (Television Lighting Consistency Index), TLMF (Television Lighting Matching Factor), and TM-30-15 (Technical Memorandum) in addition to CRI (Color Rendering Index), which can be measured singularly or in two light comparison mode.

The SpectroMaster has very impressive accuracy, repeatability, and response specs and a wide range of values in all modes. Flash for example, can be color analyzed with selectable shutter speeds from 1-1/500 sec. Ambient light has a 1.0 to 200,000 lux range (0.09 to 18,600 fc). The intuitive color touchscreen offers access to the meter's many functions including a Spectrum graph, CRI, Camera Filter, Lighting Filter, White Balance Compensation, and comparison of multiple lights.

The Text mode screen displays color temperature, lux or fc as well as color compensation and light balancing filters. After selecting your preferred color balance, the Camera Filter and Lighting Filter Screens will display the actual Rosco, Lee, Kodak Wratten, or Fuji filter designations necessary to achieve your targeted color temperature. CRI also has a dedicated screen that displays standard color reference values (including R1 thru 15) as a percentage of the light source's ability to reproduce a color accurately, as compared to the Ra standard temperature. The Multi Light Screen reads multiple light sources' color temperatures as well as light balance and color compensation recommendations, memorizes them, and allows them to be compared. With its plethora of light-analytic tools, ability to read and compare all types of light and real-world filter solutions, the SpectroMaster is destined to be a staple on set.

CRI, TLCI, TLMF, TM-30-15, and SSI

Developed by the Sci-Tech Council of the Academy, SSI (Spectral Similarity Index) gives the user the ability to set any light as a standard, or use predefined standards (such as CIE D55), and then gives other lights an SSI score based upon how well they will match. The C-800 also includes TLCI (Television Lighting Consistency Index), TLMF (Television Lighting Matching Factor), and TM-30-15 (Technical Memorandum), in addition to CRI (Color Rendering Index) which can be measured singularly or in two light comparison mode.

Match Light Sources by Measuring x, y and Hue Saturation

The C-800 has more color control parameters specifically designed to help match lights to one another. CIE1931 (x, y) has been added, giving users the ability to measure and dial-in specific chromaticity coordinates into lights of some major brands. Hue and Saturation units of measure have also been added to better match RGB LEDs to any light source. In addition, new display screens provide easy interpretation and understanding of the new data fields, making this a superior meter for all applications.

Designed to be Used on Set

• Fast button layout for single-handed operation


• 270° Swivel head to measure from any angle


• Built-in dark slide for effortless on-set use

Measure Virtually any Kind of Light

The C-800 series incorporates a CMOS linear sensor, that measures and evaluates the true color temperature of a light source from 380 to 780nm in 1nm output wavelength increments, capturing spikes in output of conventional light sources as well as fluorescent, flash, HMI, and LED sources.

Measurements

Measurements include Kelvin (K), Illuminance (lux/fc), LB/CC filters (for camera lens or lighting filters), LB/CC Index, CRI (Ra, R1 thru. R15), ⊿uv, SSI, TLCI, TM-30-15 (Rf, Rg), CIE1931 (x, y) chromaticity coordinates, Hue, Saturation.

Expanded Color Rendering Properties

Standards include CRI, SSI, TLCI, TLMF, and TM-30-15.

Extensive Memory

Up to 99 data measurements can be stored in the memory.

Wide Measurement Range of Color Temperature

• Color Temperature: 1600 to 40,000K


• Illumination: 1 to 200,000 lux in ambient light, 20 to 20,500 lux in flash light

User-Friendly Design

270-degree swivel head, dark calibration without a cap, large 4.3" color touch panel LCD display, and Customize Function.

Various Displays

Text, Spectrum Graph, Spectrum Comparison, CRI, CRI Comparison, SSI, TLCI/TLMF, TM-30-15, lighting filter for Rosco and LEE, camera filter for Kodak Wratten, LEE and Fuji, Multiple Lights Comparison, White Balance Correction.

C-800 Series Utility

The utility which can be downloaded from www.sekonic.com, offers easy settings in the meter and analysis of memorized data in a computer.

Buy Sekonic C-800 SpectroMaster Color Meter from UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

ATEM Mini Extreme ISO includes all the features of ATEM Mini Extreme, plus also records 9 separate H.264 video streams in real time, allowing capture of all 8 clean feed inputs as well as the program video. A DaVinci Resolve project file is also saved allowing the project to be recreated and edited later! Buy ATEM Mini Extreme ISO from UBMS Dubai.

ATEM Mini Extreme and ATEM Mini Extreme ISO Features

• Features miniaturized control panel based design.


• Supports connecting up to 8 cameras or computers.


• Supports streaming via Ethernet or tethered phones via USB.


• Tethers to 5G or 4G phones for mobile remote streaming.


• Records to USB flash disks in H.264.


• Two stereo audio inputs for connecting desktop or lapel microphones.


• Automatically standards converts and re-syncs all HDMI inputs.


• Includes free ATEM Software Control for Mac and Windows.


• Internal media for 20 RGBA graphics for titles, opening plates and logos.


• 4 upstream ATEM Advanced Chroma keyers for green/blue screen work.


• 2 independent DVEs plus SuperSource with 4 extra DVEs.


• 16 way multiview for monitoring all cameras, recording and streaming status.

Buy ATEM Mini Extreme ISO from UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Atem Mini Extreme model is an advanced switcher for true professionals! You get all the ATEM Mini Pro features plus 8 HDMI inputs, 2 separate HDMI outputs, 2 USB ports and a headphone connection. There are also 4 chroma keyers, 6 picture in picture DVEs, 2 media players, and a multiview with up to 16 views! Buy Atem Mini Extreme from UBMS Dubai.

There are loads of video effects too. All ATEM Mini models have USB that works like a webcam so customers can use any streaming software while the ATEM Mini Pro and ATEM Mini Extreme models add live streaming and recording to USB disks. There's also HDMI out for projectors. Microphone inputs allow high quality desktop and lapel mics for interviewsresentations.

 

ATEM Mini Extreme and ATEM Mini Extreme ISO Features

• Features miniaturized control panel based design.


• Supports connecting up to 8 cameras or computers.


• Supports streaming via Ethernet or tethered phones via USB.


• Tethers to 5G or 4G phones for mobile remote streaming.


• Records to USB flash disks in H.264.


• Two stereo audio inputs for connecting desktop or lapel microphones.


• Automatically standards converts and re-syncs all HDMI inputs.


• Includes free ATEM Software Control for Mac and Windows.


• Internal media for 20 RGBA graphics for titles, opening plates and logos.


• 4 upstream ATEM Advanced Chroma keyers for green/blue screen work.


• 2 independent DVEs plus SuperSource with 4 extra DVEs.


• 16 way multiview for monitoring all cameras, recording and streaming status.

Buy Blackmagic Design ATEM Mini Extreme from UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The advantage of ATEM Streaming Bridge is broadcasters can use it to connect high-quality video links directly from any ATEM Mini Pro studio. This allows broadcasters to access a wide range of talent, worldwide. ATEM Mini Pro's video stream is much higher quality than simple conferencing software, so customers get broadcast quality, clean of any streaming software vendor logo burn-in. Buy ATEM Streaming Bridge from UBMS Dubai. We can provide the best price and fast delivery for Blackmagic Design ATEM Streaming Bridge.

The ATEM Streaming Bridge is a video converter that lets customers receive an H.264 stream from any ATEM Mini Pro and convert it back to SDI and HDMI video. This means customers can send video to remote locations around their local Ethernet network, or via the internet globally. That's possible because it uses advanced H.264 codecs for higher quality at very low data rates. Imagine broadcasters and bloggers collaborating on shows and creating global networks of ATEM Mini Pro remote broadcast studios. Setup is easy as the ATEM software utility can create setup files that customers can email to remote ATEM Mini Pro studios. ATEM Streaming Bridge is the perfect way to use ATEM Mini Pro as a remote broadcast studio. Atem Streaming Bridge will be available in the UBMS Dubai showroom soon.

ATEM Mini switchers make it easy to create professional multi-camera productions for live streaming to YouTube and innovative business presentations using Skype or Zoom. Simply connect ATEM Mini and customers can switch live between 4 high-quality video camera inputs for dramatically better quality images. Or connect a computer for PowerPoint slides or gaming consoles. The built-in DVE allows exciting picture in picture effects, perfect for commentary. There are loads of video effects too. All ATEM Mini Pro models have live streaming which can be used to connect directly to the ATEM Streaming Bridge. There's also HDMI out for projectors. Microphone inputs allow high-quality desktop and lapel mics for interviews and presentations.

Buy ATEM Streaming Bridge from UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The wireless high-definition video transmission system, using today’s  highest level of wireless communication technology, transmits broadcast-quality uncompressed, non-delayed 3G-SDI or HDMI 1080P HD signals. Transmitter and receiver can provide dual SDI input and output, with OLED screen showing output information, supporting smart cooling fan. Working in broadcast mode, the transmission range can reach 2000ft. Buy Hollyland COSMO 2000 from UBMS Dubai. We can provide best price and fast delivery .

Key Features

• Transmission Range: 2000ft


• Channel Selection: 0-4 (USA) / 0-9 (Outside of USA)


• USB Firmware Upgrade


• No Compression, No Latency


• Point to Point & Broadcast Mode


• Anti-Collision Design for Antenna Interface


• 3G-SDI Level B

Buy Hollyland COSMO 2000 ( 1TX+ 1TRX ) From UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Mars 300 PRO is using the latest coding, decoding technology, and 5G wireless transmission technology. It can achieve ultra-low latency wireless video transmission. It has a transmission range over 328ft with a clean line of sight (LOS) when connects to 3 APPs Monitoring. The transmission lantency is 0.1 sec. And transmitter can powered by both L-series battery plate and USB type C port. Buy Hollyland Mars300Pro Single TX from UBMS Dubai. We can provide best price and fast delivery for all Hollyland products.Buy

Key Features

• Wheel Button on the Side, One-button Rolling Adjustment


• OLED Screen Display on the Side


• Transmission Latency is 0.1s


• HDMI Input & HDMI Loop Out at TX


• Supports USB Type-C Power Supply


• 1 Transmitter Supports up to 3 APPs Monitoring


• Supports Smart Channel Selection


• Supports APP Firmware Upgrade

Buy Hollyland Mars300Pro Single TX From UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

It can achieve ultra-low latency wireless video transmission. It has a transmission range over 400ft with a clean line of sight (LOS) when the transmitter is connected to 1 receiver. The transmitter can connect with 1 receiver and 2 APPs Monitoring (Or 1 Transmitter connects to 3 APPs Monitoring Without RX). And Both transmitter and receiver equipped with L-series battery plate and also can powered by USB type C port. Buy Hollyland Mars300Pro Enhanced From UBMS Dubai. We can provide best price for Mars300Pro Enhanced .

Add up to 1080p60 wireless video transmission to your gimbal, mirrorless, or DSLR camera rig using the lightweight enhanced Mars 300 PRO HDMI Wireless Video Transmitter/Receiver Set from Hollyland. This enhanced model features two external antennas on the transmitter, including one spare. The transmitter provides a single HDMI input plus an HDMI loop-out for viewing on an on-board monitor and the receiver provides two HDMI outputs. The transmitter features line-of-sight transmission up to 400' to the receiver and up to 300' to a Wi-Fi app.

Using the Hollyview app for iOS or Android, you can monitor your video transmission in real time via a Wi-Fi connection. The transmitter can transmit to up to one receiver and two apps, or to a total of three apps, simultaneously. The transmitter and receiver are compact in size, feature a bright OLED display for configuration, and they each feature a 1/4"-20 mounting thread. Each can be powered using a USB Type-C source, or they can be powered using a separately available L-series type battery using their battery plates. The Mars 300 set also includes an accessory expansion plate, a shoe mount, and a USB Type-C cable.

Key Features

• Wheel Button on the Side, One-button Rolling Adjustment


• OLED Screen Display on the Side


• 400ft Transmission Range between RX and TX (LOS)


• 300ft Transmission Range between TX and APP (LOS)


• The Lowest Latency is 0.08s


• HDMI Input & HDMI Loop Out at TX, Dual HDMI Output at RX


• Supports USB Type-C Power Supply


• 1 Transmitter Supports up to 1 Receiver and 2 APPs Monitoring (Or 1 Transmitter Supports up to 3 APPs Monitoring Without RX)


• Supports Smart Channel Selection


• Supports APP Firmware Upgrade.                                                                                Buy  Hollyland Mars300Pro DMI Wireless Video Transmitter/Receiver Set From UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Hollyland Technology has been very active in the filmmaking industry in recent years, especially with their introduction of entry-level wireless transmitters and wireless intercom systems to the industry. After MARS 300, which appeared to be the first prosumer wireless transmitter in the market, they continued with product launches of the MARS 400S series and MARS X prosumer wireless transmitters, MARS T1000 prosumer wireless intercom system, and along with their professional gear release of COSMO M7 and SYSCOM 421. And now, the MARS 300 PRO is here!  From the name MARS 300 PRO, it is pronounced that this is an updated product of the once-popular product MARS 300. Buy Hollyland Mars 300 Standard version from UBMS Dubai . We can provide best price and fast delivery for all Hollyland products

Mars 300 PRO is using the latest coding, decoding technology, and 5G wireless transmission technology. It can achieve ultra-low latency wireless video transmission. It has a transmission range over 328ft with a clean line of sight (LOS) when the transmitter is connected to 1 receiver. The transmitter can connect with 1 receiver and 2 APPs Monitoring (Or 1 Transmitter connects to 3 APPs Monitoring Without RX). And Both transmitter and receiver equipped with L-series battery plate and also can powered by USB type C port.

Using the Hollyview app for iOS or Android, you can monitor your video transmission in real time via a Wi-Fi connection. The transmitter can transmit to up to one receiver and two apps, or to a total of three apps, simultaneously. The transmitter and receiver are compact in size, feature a bright OLED display for configuration, and they each feature a 1/4"-20 mounting thread. Each can be powered using a USB Type-C source, or they can be powered using a separately available L-series type battery using their battery plates. The Mars 300 set also includes an accessory expansion plate, a shoe mount, and a USB Type-C cable.

Key Features

• Wheel Button on the Side, One-button Rolling Adjustment


• OLED Screen Display on the Side


• 328ft Transmission Range (LOS)


• The Lowest Latency is 0.08s


• HDMI Input & HDMI Loop Out at TX, Dual HDMI Output at RX


• Supports USB Type-C Power Supply


• 1 Transmitter Supports up to 1 Receiver and 2 APPs Monitoring (Or 1 Transmitter Supports up to 3 APPs Monitoring Without RX)


• Supports Smart Channel Selection


• Supports APP Firmware Upgrade.                                                                          Buy Hollyland Mars 300 PRO HDMI Wireless Video Transmitter/Receiver Set From UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The transmission range of MARS T1000 reaches up to 1000ft in a clean line of sight (LOS) with full-duplex wireless communication and carrier-grade voice quality.

With the DECT protocol technology, MARS T1000 is widely used in the areas of studio, stage events, EFP, webcasting, filmmaking and etc. The transmission range of MARS T1000 reaches up to 1000ft in a clean line of sight (LOS) with full-duplex wireless communication and carrier-grade voice quality. Buy Hollyland MARS T1000 from UBMS Dubai.

1,000FT Range with Carrier-Grade Voice Quality

The transmission range between the base station and each beltpack could reach up to 1,000ft clean line of sight(LOS), with full-duplex and carrier-grade voice quality wireless communication

Full-Duplex Wireless Communication

1 base station supports up to 4 beltpacks connections. It also supports up to 2 base stations daisy chain.

OLED Display on Base Station & Beltpacks

OLED Screen makes all settings visible, and it provides essential information display such as beltpack number, connection status, battery status, and signal strength

SUPPORTS L-SERIES BATTERIES OR WALL ADAPTOR POWER SUPPLY FOR THE BASE STATION, AND BUILT-IN LITHIUM BATTERY FOR BELTPACKS

SUPPORT TALLY FEATURE

The tally feature can be easily added to the system with the accessory Tally Universal Signal Converter provided by Hollyland

USB FIRMWARE UPGRADE

An easy and quick firmware update is made possible via the USB Type-C interface on both the base station and all beltpacks

SUPPORTS EXTERNAL CONNECTION WITH OTHER INTERCOM SYSTEMS

The system could connect with other 2-wire intercom systems, such as InterCom and Hanson, with the standard 4-wire RJ45 interface plus the accessory 2/4 Wire Converter provided by Hollyland

WIDE-RANGE APPLICATIONS

With the DECT protocol technology, MARS T1000 is widely used in the areas of filmmaking, video production, sports events, live broadcast, corporate events, emergency dispatch, etc

KEY FEATURES

• 1000ft Communication Range, Carrier-Grade Voice Quality


• 1.9GHz Frequency Bandwidth


• Full-Duplex Wireless Communication


• Built-In Lithium Batteries, with Longer than 8 Hours Run Time on a Full Charge (Beltpacks)


• Up to 4 Beltpacks Communication Simultaneously (Base Station)


• 3.5mm Headset and 4-Pin Analog Audio Connection (Base Station)


• Base Station Support 7-36V DC Wide Voltage Input


• USB Firmware Upgrade


• Industrial Metal Case, Stable and Reliable

APPLICATIONS

• Filmmaking


• Live Broadcasting


• Corporate Events


• Production Crew Communication


• Stage Activities


• Emergency Dispatch


• Webcasting

General Features

• Ideal for broadcasting, forum meetings, business activities, education, and training


• 1000' full-duplex wireless communication for simultaneous two-way audio signal transmission without latency


• Wireless tally function allows accurate communication by seeing beltpack screen colors


• Includes five single-sided headsets

Base Station Features

• Base station supports up to four rechargeable beltpack transceivers


• Remote mic kill via base station


• Adjustable volume control on front panel


• USB Type-C and four USB Type-A ports


• Integrated dual L-series battery plates

Beltpack Transceiver Features

• Built-in lithium battery provides up to eight hours of operating time


• Power switch, volume control, and mute/call button


• Easy operation via OLED screen and menu navigation buttons


• USB Type-C charging port


• Industrial metal shell with belt clip


• Buy Hollyland Mars T1000 From UBMS Dubai.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

0.04 seconds latency Changing the game in live video transmission. The Zao-SH is a small mobile encoder that can live stream video from a remote location back to any destination. But with an incredible glass-to-glass latency of only 0,04s (40ms) over LAN, or 0,065s (65ms) over 4G. Buy Zao-SH from UBMS Dubai.

The Zao-SH is an H.265 HEVC encoder that can be used in a variety of video contribution scenarios. From broadcast applications, such as news gathering, to public safety, law enforcement and military applications, the Zao-SH can be utilized to send an encrypted live stream from a broadcast or surveillance camera, drone, vehicle, body cam or helicopter.

Smart-telecaster Zao-SH is a 5G compatible ultra-low latency live video transmitter

It is equipped with next-generation transmission technology that reduces the glass to glass latency to 0.04 seconds (40ms) or less. The latency in live video transmission has been an important concern but the Zao-SH is able to transmit live video signal to/from remote areas in almost real time.

The Zao-SH can send a fully encrypted live stream, but simultaneously a return data feed can be sent from the destination back to the Zao-SH, for example to control a PTZ camera or to remotely control a drone gimbal.

The Zao-SH can live stream reliably over multiple bonded 4G SIM cards from different network providers, and /or can be utilized with a LAN connector.

At the receiving end, a Linux based software decoder will provide a video output of the live video. End to end latency starts at a remarkable 0,04s.

Buy SKU Zao-SH From UBMS

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Designed primarily for 2K, 4K, and 8K live broadcast, the SHOTOVER M1 camera system features fifth-generation technology, and an open platform design to accommodate the world’s rapidly changing camera technology. The M1 includes the same award winning 6-axis design as the company’s K1 and F1 camera systems, delivering unshakable stability with unmatched look down capability.

The M1’s precision machined ultra-light aircraft aluminum structure allows it to be used on a wide range of aircraft while making it lighter than legacy aerial broadcast systems. The SHOTOVER M1 can also be used on a host of ground vehicles and watercraft and is backed by world-class 24/7 service and support.

“The culmination of ten years of research and development and fresh cutting edge technology, has led to the creation of the M1,” said SHOTOVER CEO Brad Hurndell. “We are confident the system will allow our customers to keep up with the demanding requirements of live broadcast for years to come.”

Helicopters Inc, a leading provider of news gathering helicopters in the United States, operating in more than thirty-five cities nationwide, has become the first company to acquire the M1. “SHOTOVER’s customer-centric design approach has resulted in a compact and lightweight product that fits the future needs of the broadcast industry and our company,” said Tom Wagner, Vice President of Helicopters Inc. “We look forward to working with SHOTOVER and are excited to put the new M1 to work.”

The development of the SHOTOVER M1 builds upon the company’s success in designing gyro-stabilized systems for the television and motion pictures industries. The creators of the company’s flagship SHOTOVER K1 were recently awarded a Scientific and Engineering Academy Award® for the concept, design, engineering, and implementation of the system.

Alongside the latest ENG payload options, the M1 can house a range of popular cinema cameras and lenses such as the Arri Alexa Mini, RED Weapon and Canon 30-300. Other system features and options include an angled front window for brilliant imagery without flares, interfacing to moving map overlays, the ability to ship with payload integrated from the factory, and custom color schemes to match broadcasters branding.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The SHOTOVER K1 platform offers aerial cinematographers an unprecedented level of stability, control, and versatility, in a compact package easily configured for 2D, 3D, and Ultra HD shooting. Its open architecture design allows for a comprehensive range of camera and lens interchanges, and its modular carbon fiber construction means it ships as excess baggage on commercial flights worldwide with no export restrictions. Further increasing functionality, the K1 camera system can be mounted on ground vehicles or watercraft, used inverted or right side up, for capturing stabilized footage.

Relied upon by production companies and aerial cinematographers across five continents, the SHOTOVER K1 has gained rapid adoption in the entertainment community due to its radical reinvention of the practice of aerial cinematography. The system provides filmmakers with a solution that is easier and faster to work with than legacy systems while delivering unsurpassed images. Among the pioneering firsts the SHOTOVER K1 has introduced to the market are:

* First ever motion picture system to utilize a modular design allowing filmmakers to utilize multiple camera and lens combinations depending on their needs. Previously, productions would need to send their systems back to the factory to make these changes.

* First ever motion picture system that can be shipped around the world with no ITAR restrictions. ITAR stands for International Traffic in Arms Relations and is a set of US government regulations that control the export and import of defense-related technologies. Legacy aerial systems are subject to these restrictions limiting the ability of productions to shoot in countries like China without a lengthy bureaucratic process.

* Thanks to its carbon fiber construction, the K1 was the first ever motion picture system light enough to ship around the world as excess baggage on commercial flights.

* First ever motion picture system that can be brought outright rather than available through rental only.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Ranging from low cost HDMI type to long range H.264 solutions with return video, talk back and potential camera control unit control, full details can be found on the IDX website

Create » Content Acquisition and Capture » Camera Accessories » Camera pedestals »

Full line of camera robotic systems

PTZ Cameras, Camera Tracks

IP Prompting Systems

Wireless Camera Systems

Microwave Relay & Satcom Systems

PHASE - Serving the Brazilian Television Marker successfully since 1980

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

 

The small motor controller MagNum Mini is perfectly suited for Gimbal, Handheld, Drone and Steadicams.

 

The MagNum Mini receiver is very small (91 x 53 x 19 mm) and weighs only 120 Gramm. It is compatible to all major lens motors and includes a power booster for max. torque, speed and responsiveness. The GHz wireless transmission with spectrum analyzer is the result of over 25 years’ experience that makes its reliability unprecedented.

 

The Hand Unit features extraordinary smooth and ergonomic user experience. Customizable user keys (U1 to U4) allow a very intuitive operation. The MN-200T Hand Unit with the VariFluid focus wheel offers smooth adjustable torque and includes two freely settable mechanical end stops (Varilock II). Via the DMX port it is possible to take over control via control panels or motion control software.

Normal
0


21


false
false
false

DE
X-NONE
X-NONE




















































































































































































































































































































































































































/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:8.0pt;
mso-para-margin-left:0cm;
line-height:107%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri",sans-serif;
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;
mso-fareast-language:EN-US;}

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

Together with users, the MagNum wireless FIZ Lens Control System (LCS) was ergonomically and functionally optimized. It is availabe in three versions: the basic model with one motor channel (MN-101), a two-motor channel version with a Zoom Rocker (MN-ZR) upgrade option for the hand unit (MN-150), and a fully equipped 2-motor channel version (MN-200). Extension modules expand MN-150 or MN-200 receiver with a maximum of two other motor channels, and enhanced broadcast capabilities.

The LCS consists of two parts:

Ergonomical designed hand unit

The hand units MN-150T and MN-200T each offer a handwheel with two variable mechanical stops (VariLock II), infinitely adjustable fluid damping (VariFluid), mechanical locking device and the optional inclusion of scale discs or rings. The standard delivery scope contains a large scale ring. The MN-200T hand unit additionally offers a contact-less, dust-proof slider bar with variable mechanical stops.

The optional belt Holster (MN-HOL) attaches the Hand unit securely to you belt. This means the Focus assistant can safely perform without getting stuck or swinging off of the hand unit and the hand unit itself is close at hand.

Upgradable receiver

The MagNum Extension Module Motor and Lens Port (MN-EXT-MOT-LP) offers up to 3-motor channels and a camera lens port interface for universal use in Cine and Broadcast applications. The Extension Module Motor (AL2-EXT-MOT) upgrades the MN-200R on up to 4 motor channels, for 3D or special application users.

• 
  

  Mounting of the extension module onto the extension Interface of the MN-200R

  
  


• Extension module MN-EXT-MOT-LP with 1x motor channel and 1x camera 12-pin Hirose interface for full broadcast capabilities (video return and talkback switching, Iris RCP control, focus, iris and zoom follow voltage)


• 
  

  Extension module AL2-EXT-MOT with two additional sockets for digital encoder motors (2x 7-pin Lemo)

  
  

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

For nearly a decade the Meridian system has been the industry standard for mission critical zero delay HD live transmission within the 5GHz licence-exempt spectrum.

The Meridian system easily integrates into temporary or permanent installations by providing a high quality, uncompressed HD wireless transmission for situations where extremely low latency is essential.

With countless production credits to its name the Meridian has a proven track record when it comes to multi-camera studio environments. In an increasingly congested licence-exempt spectrum, the Meridian comes into its own by using a much narrower channel bandwidth than many of the other products on the market thereby increasing the robustness of the signal.

The Meridian remains the cornerstone of Boxx TV’s zero delay product range and when combined with bolt-on and form factor options provides a system that is versatile enough to suit any production requirements.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The Atom System is a compact and powerful wireless system offering HD video
transmission with zero delay along with a host of features to suit any broadcast and Video Assist requirements at ranges exceeding 600m+. Weighing in at just 253g and measuring 111 x 71 x 25mm, the transmitter provides an HD-SDI Loop along with HDMI inputs and can broadcast to an unlimited number of Atom and Atom Lite receivers.

The Atom is designed to operates out of the box with minimal configuration and with real-time channel selection over the 5GHz licence exempt spectrum.

The Atom has a sleek design and supports Timecode and Record Trigger. As well as being the smallest, lightest, and most affordable system by Boxx to date, the real
strength of the Atom is that it has has been able to introduced new features whilst maintaining backward compatibility with existing transmitters and receivers so that all components in the entire Atom product line are interoperable and nothing is obsolete.

As with all Boxx products, the Atom and Atom Lite systems were designed and engineered by hands-on experienced industry experts.

Included with the system are on Atom Transmitter, one Atom Receiver and accessories. The Atom Receiver is available with either V-lok or Anton Bauer battery plates.

Create » Content Acquisition and Capture » Camera Accessories » Wireless camera systems »

The Atom Lite system is a compact and powerful wireless system offering HD video
transmission with zero delay along with a host of features to suit any broadcast and Video Assist requirements at ranges exceeding 150m+. Weighing in at just 253g and measuring 111 x 71 x 25mm, the transmitter provides an HD-SDI Loop along with HDMI inputs and can broadcast to an unlimited number of Atom and Atom Lite receivers.

The Atom Lite is designed to operates out of the box with minimal configuration and with real-time channel selection over the 5GHz licence exempt spectrum.

The Atom Lite has a new sleek design and supports Timecode and Record Trigger. As well as being the smallest, lightest, and most affordable system by Boxx to date, the real
strength of the new Atom Lite is that it has has been able to introduced new features whilst
maintaining backward compatibility with existing transmitters and receivers so that all components in the entire Atom product line are interoperable and nothing is obsolete.

As with all Boxx products, the Atom and Atom Lite systems were designed and engineered by hands-on experienced industry experts.

Included with the system are on Atom Lite Transmitter, one Atom Lite Receiver and accessories.