Kiloview MG300 IP Video Media Gateway

Support » Secure » Access »

The broadcast landscape is transforming. The influx of content, the growing audiences, and the rising consumer demands are driving the need for flexible and efficient delivery networks.

NOVELSAT FUSION, a new take on processing and delivering today’s media, innovates to provide the best experience to any device, anywhere, anytime.

NOVELSAT FUSION is a powerful end-to-end live linear platform for broadcast and broadband content connectivity and delivery. Expanding flexibility and scalability, FUSION delivers optimal video processing, delivery, and security solutions by technology innovation across the media network. Facilitating holistic delivery across broadcast and broadband platforms, FUSION addresses a wide range of use cases and deployment scenarios.

Support » Secure » Access »

Next-generation WayPoint 3 receiver with four HD and 2 4K UHD outputs, delivering the highest picture quality for sports, live events and film productions. Dejero WayPoint receivers reconstruct video transported over multiple IP connections from Dejero transmitters, decode HEVC or AVC, and output to your desired workflow—SMPTE ST 2110, SDI, or MPEG-TS. - 4 HD outputs - 2 4K UHD outputs - Hard drive redundancy - Power supply redundancy

Support » Secure » Access »

Topic Distillery ™ enables topic-based discovery for all live broadcast content, allowing viewers to find content impossible to discover before, access the right content faster through chapter-markers and offer more relevant content recommendations.

Support » Secure » Access »

Pan control for the 21st century

Stereoplacer is an advanced fine-tune parametric balancing control. You can tune each band into specific frequencies and move the frequency content around in the stereo sound stage. Just choose the position you want, and let Stereoplacer take care of preserving the balance of the original sounds.

Choose the frequencies you want to fix and move them anywhere, leaving the rest of the stereo image intact. Make improvements in any area of the sound stage without causing problems elsewhere. Stereoplacer gives you precise control you just can’t get within a traditional mix setup.

Enhance recordings

Focus in on the frequencies you want to move using the intuitive solo controls and then tweak/fix/align them in the stereo panorama without affecting any other regions - simple, quick and effective!

• Fix poor recordings


• Ideal for restoration


• Reposition complex audio


• Reconstruct mono image


• Dynamic visual feedback


• Harmonic capture

Flexible controls

With fully adjustable curves (bell, high and low shelving and even additional linked-harmonic overtones) you can redistribute stereo information with subtlety, or make powerful corrections – even moving hard-panned frequencies from one side to the other – without affecting the overall level balance of the material.

'Panning' the bass

Sometimes a mix calls for a bass element, say the bass guitar track, to be panned away from the centre. Often this is best avoided as off-centre high energy in the low frequencies can create more problems than it resolves. Using Stereoplacer, however, the low frequencies can be kept in the centre whilst higher frequencies (i.e. the attack component) are moved across the stereo field with a shelving band. This gives the impression that the bass part has been panned, when really only the high, directional frequencies have been affected.

You can also achieve the opposite effect, pulling stray low frequencies back into the centre without affecting the entire sound.

With each node it is possible to add a number of additional harmonically linked bell curves, all referenced from the one ‘root’ control point.

For post production and restoration

Re-position specific elements or achieve gentle linear phase adjustment of your entire mix. Extrapolate and re-balance poorly positioned instruments whilst leaving the rest of the soundfield intact. You can even add stereo detail to previously mono recordings, leaving the original character intact.

Typical applications

• Panning sounds in sample loops


• Fixing poor microphone placement


• Shifting problem frequencies


• Double tracking stereo distribution


• Extrapolating poorly panned sounds

Support » Secure » Access »

Powerful stereo widening

Stereoizer is a stereo width plug-in with a clear difference - your mix will still sound great in mono. Add natural sounding width and depth to any recording, mono or stereo, leaving the character of the source intact. Or go super wide - the choice is yours.

Achieve a more coherent sound with polish and spatial balance, without adding artificial reverb, chorusing or delay. Total mono compatibility and no unwanted artefacts.

Add clarity & focus

Expand your stereo image. Mono to stereo, stereo to super-wide and everywhere in between. Natural extension or extreme effects, Stereoizer provides it all, with plenty of presets & detailed control for the expert.

• Natural panoramic extension


• No unwanted artefacts


• Retains original character


• Highly mono compatible


• Band limited precision


• Dynamic visual feedback

Detailed stereo extension

Each of Stereoizer's algorithms adapts the characteristics of your audio using techniques based on the way the human ear perceives width. The IID (Interaural Intensity Difference), ITD (Interaural Time Difference) and Linear Width algorithms work independently of each other, giving you maximum flexibility. For more lively adjustments, use the IID and ITD controls; the Linear Width control is more subtle and, crucially, leaves the 'centre space' of your mix untouched.

Highly mono compatible

Mono compatibility is easily overlooked, but is as important now as it has ever been. Many club and PA sound systems are still set up for mono playback, and the majority of portable radios, smartphones and many TV sets are mono.

Stereoizer does not add any artificial reverberation, which means no disruptive artefacts such as doubling/chorusing effects or phase cancellation affecting your mono signal. The 'Collapse output to mono' option allows you to check mono compatibility on the fly for your own peace of mind.

For post production and restoration

Stereoizer is a gift for subtle enhancement of ambience sounds, clearing space for dialog in the centre, or even injecting stereo liveliness into formerly mono recordings.

Whether restoring old recordings or optimising new recordings for louder playback, Stereoizer allows for natural-sounding extrapolation of your existing stereo image. This can be used to re-introduce natural ambience which may have been lost during other stages of the production process.

Stereo frequency analysis

Stereoizer's visual analysis displays how your stereo field deviates from the centre. This is measured against frequency from 20Hz to 22kHz, allowing for frequency-conscious adjustments without the need to refer to a separate analysis plug-in.

Typical applications

• Expanding a narrow stereo image


• Introducing width to mono recordings


• Adding movement


• Taming eccentric material


• Creating 'centre space'


• Avoiding unnecessary EQ

Support » Secure » Access »

Define your surround mix

Surround Suite delivers all the control needed to define, enhance and fine-tune your surround mix to perfection. Achieve natural and coherent upmixing from stereo to 5.1 and 7.1 via Halo Upmix, take advantage of ISL's transparent True Peak limiting and SEQ-S's linear phase EQ in surround modes, and complement your surround workflow with Halo Downmix's precise and tweakable downmixing.

Natural extension

With unique centre channel management, including switchable dialog extraction, Halo Upmix is perfect for all types of production from archive restoration and TV through to the full 7.1 feature film experience. With surround delivery requirements becoming more and more common, a tool like Halo Upmix can be indispensable. Unlike legacy upmixing practices, Halo Upmix offers full downmix compatibility. For those working in Dolby Atmos, Auro 3D and Ambisonic environments, a 3D immersive audio option is also available.

Complement your workflow

Precise surround control, versatile downmix balancing and mix monitoring for accelerating and enhancing your surround productivity. Halo Downmix is the glue that brings your workflow together, allowing you to deliver in surround and stereo with ease and without compromise.

Transparent, reliable

No need to second guess your sample-peak limiter time and again, or deliberately increase headroom to avoid a downstream problem. Just dial in your True Peak limit and let ISL take care of the rest. Unlike traditional limiters, ISL provides a TPlim control, automatically adjusting transfer curve parameters for minimally invasive brick-wall protection.

Unparalleled flexibility

SEQ-S gives you EQ matching up to 7.1, with stereo mid/side operation and automated spectrum analysis. Automated EQ morphing allows for controlled scene transitions and creative sound design possibilities.

For post and broadcast

Surround delivery requirements are becoming more common, making a consistent surround workflow indispensable for anyone in post production. Expand your existing stereo and 5.1 mixes with zero artificial reverberation or chorusing effects, tweak and refine with True Peak limiting and powerful EQ sculpting/matching/morphing, and then fine-tune your downmix to ensure the best possible stereo fold-down.

Support » Secure » Access »

Kiloview Roadmap is a diagram that demonstrates all current Kiloview products, forthcoming products, AV-over-IP solutions, and the comprehensive logic behind sewing everything together to form a Kiloview ecosystem. The Roadmap shows Kiloview’s ambition and confidence to expand the market with its considerable amount of new products on demand.

Kiloview Roadmap was divided into several parts, Kiloview encoders, NDI sources, NDI CORE, KiloLink Server, NDI STUDIO, Kiloview decoders, Kiloview Intercom Server (KIS) , and the Kiloview control panels.

Through a single map, KILOVIEW distributors, resellers and end-users are all able to see what’s coming up in 2022 and Kiloview’s ambition and determination in delivering useful products and solutions to better serve the clients. This is also the first time that the audience can crystally recognize that there’s an all-inclusive comprehensive portfolio backing those popular encoder/decoder boxes. “Kiloview is committed to creating not only great devices, but that has a vision for an entire ecosystem totally built around Kiloview’s Technology,” said Stefano Sarzi Madidini, Technical Manager of ADCOM.

For users who are new to Kiloview, Roadmap will be a good tool to understand what values users can leverage from Kiloview to kick off and win their own business.

Support » Secure » Access »

Kiloview P series video encoder is a professional high-end encoding device specially designed for mobile applications. It adopts KiloLink–Kiloview’s patented algorithm to solve the problem of poor connectivity. It perfectly suits outdoor live streaming and transmission in such scenarios as live events, concerts, sports, field broadcasts, emergency spots,s and more, anytime, anywhere.

Kiloview P series features ultra-low end-to-end latency (<1s), meanwhile, it supports voice intercom with Kiloview KIS, it’s also perfect for remote program production or group interaction.

P1 supports SDI input, while P2 supports HDMI input.

Up to 5 Connections Bonding, Stream Like a Pro

2x Internal 4G Cellular + 2x USB 4G Cellular (LAN)+ 1x Wi-Fi (+1*RJ45) supported and it’s free configurable of any desired network.

With the patented bonding algorithm with KiloLink, P series encoders can automatically balance the data of all connections and adjust the bitrate accordingly to make sure reliable streaming.

Besides, P series can support Wi-Fi hotspot for data and file transmission.

Self-Deploy Bonding Cloud with Device Management

Kiloview provides the bonding software for free, it’s available for deployment on your own server or cloud-based server.

With KiloLink Server, you can manage all your registered devices on the server end, such as monitoring device status, previewing a stream, parameter settings, firmware updating, port forward, and so on. Real-time connection status and data statistics are also available the on the server end.

What’s more, it’s easy to manage with a single QR code. All can be managed on your palm.

Ultra-Low Latency for End-to-End Video Transmission

With optimized technology, Kiloview P series offers an ultra-low latency video streaming experience, which is suitable for remote production, IRL streaming, or audience interaction with high quality. End-to-end latency with 4G-bonding server is less than one-second under normal working conditions.

Multiple Platform Streaming

Kiloview P series encoder supports streaming to 16 platforms simultaneously by configuring the main and sub stream in the web console, which means you can stream to all the popular platforms with the same content. (Main stream resolution up to 1080P60, sub stream resolution up to 720P60)

Video Rotate/Crop, and Image Overlay

With FPGA processing unit, it can easily realize the functions of rotating and cropping for vertical/horizontal video which makes it social media friendly. You can also mirror the stream, or adjust the color. Moreover, you can set your overlay image at any position such as adding a logo, text etc.

Support » Secure » Access »

Kiloview N30 12G-SDI/Full NDI converter is a bi-directional converter that supports 12G-SDI video input (encoder) to Full NDI with 12G-SDI loop through for view on monitor, or 12G-SDI video output (decoder) from Full NDI.

Real Professional Broadcast-Grade NDI Converter

The N30 supports up to 12G-SDI 4K video input to Full NDI and loop through for monitoring, at the same time it supports full NDI to 12G-SDI output. It’s a real broadcast-grade NDI converter. It's an NDI encoder, it's also an NDI decoder.

Both NDI encoding and decoding can work on this device, you got two in one. Switching the working mode on the UI to choose the mode you need; it can easily meet all your different workflows.

*N30’s encoding and decoding functions are mutually exclusive, and cannot be used at the same time.

Seamless Switching without Lagging

When decoding NDI sources, with Kiloview unique technology, there will be no lag when switching the output NDI videos.

Control with a USB keypad

In decoder mode, you can preset the NDI sources from number 0~9. Connect the decoder with a USB keypad, you can easily choose the output source by a single press.

Or you can even use the USB Keypad to control a PTZ camera- the cheapest PTZ Keyboard you can get.

PTZ Control and Big-sized Tally

Kiloview N30 supports PTZ control through USB to serial RS232/485/422. It also supports PTZ control over IP, no extra cable required.

N30 has a big-sized while bright and distinct Tally for PVW/PGM indication–all is to make perfect cooperation for your team.

Support » Secure » Access »

Kiloview N40 4K HDMI/NDI converter is a bi-directional converter that supports 4K HDMI video input (encoder) to full NDI with 4K HDMI loop-through for view on the monitor, or 4K HDMI video output (decoder) from full NDI.

Real 4K, Really Professional

With HDMI2.0 interface, It supports real 4Kp60 video input and converts it to full NDI and loop through for monitoring, at the same time it supports Full NDI to 4K HDMI output. It’s a real 4K NDI converter for high image quality.

Both NDI encoder and NDI decoder

This tiny device (100*80*28mm) can do both NDI encoding and decoding, so you get two for the price of one. Changing the working mode on the UI to the mode you want, and it can easily accommodate all of your workflows.

*N40’s encoding and decoding functions are mutually exclusive, and cannot be used at the same time.

Seamless Switching without Lagging

In decoding mode, with Kiloview’s unique technology, there will be no lag when switching the output NDI videos.

Control with USB Keypad

In decoder mode, you can preset the NDI sources from number 0-9. When your keypad is ready, you can easily choose the output source with a single press.

Or you can even use the USB Keypad to control a PTZ camera–the cheapest PTZ Keyboard you can get.

PTZ Control and Big-sized Tally

Kiloview N40 supports PTZ control through USB to serial RS232/485/422. It also supports PTZ control over IP, no extra cable required.

N40 has a big-sized while bright and distinct Tally for PVW/PGM indication–all is to make perfect cooperation for your team.

Support » Secure » Access »

KILOVIEW N60 is a brand-new full-function NDI converter.

Adopting the leading FPGA technologies, advanced-level AVC/HEVC algorithm, and NDI algorithm, KILOVIEW N60 supports 4Kp60 format encoding/decoding with both NDI High-bandwidth and NDI|HX, meeting all your demands and applications of IP-based video transmission.

Encoding & Decoding Converter

KILOVIEW N60 supports encoding/decoding of NDI as well as NDI|HX by H.264/H.265.

In the encoding mode, KILOVIEW N60 can encode a 4K HDMI signal into an NDI or NDI|HX video steam.

In the decoding mode, KILOVIEW N60 will automatically adapt the NDI and NDI|HX format as your end needs.

KILOVIEW N60 will take care of your 4Kp60 video transmission.

Better color performance: Up to YCbCr 4:2:2 and 10bits color depth

The N60 supports a professional YCbCr 4:2:2 color space and a 10-bit color depth (the common 8-bit color depth is also available). N60 promises higher color and image quality, particularly to fulfill the needs in the broadcasting and medical imaging industries that bear no color fringing.

USB Extension

N60 has both USB 3.0 Type-A and USB 3.0 Type-C interfaces for you to :-Access a Web Camera via USB 3.0 Type-A as a video input source for encoding;-Connect to your PC via USB 3.0 Type-C as a USB video input;-Control PTZ Camera via USB expansion.

High-quality ultra-low latency of end-to-end transmission

With ultra-low end-to-end latency, KILOVIEW N60 is a powerful bi-directional converter that supports every second of your 4K video transmission over IP.

• Encoding 4K HDMI/USB video signal into NDI or NDI|HX stream.


• Decoding NDI or NDI|HX streams into HDMI.


• Loop-out for view on a monitor or projector.

Large-sized Color LCD Screen and Scroll Wheel

A big color LCD screen and a scroll wheel enable you to customize settings, switch on/off, set quick shortcuts, and control all video sources with preeminent ease.

At the back of the N60, there is a built-in small tally to show the status.

Support » Secure » Access »

Kiloview MG300 media gateway is a high-performance embedded multi-functional device. It integrates functions such as protocol conversion, streaming distribution, multi-channel video decoding, customizable output display, and video preview.

Protocol Converter

MG300 is compatible with NDI®|HX (2.0) , SRT , RTMP, RTMPS, RTSP, TS-UDP, and HLS, etc. It supports the decoding with all those different protocols, at the same time supports up to 9 protocols cross conversion. Each input stream is converted into 4 same or different protocols output.

Media Server

It supports up to 50 concurrent access for streams distribution/live streaming;

(Note: The actual concurrent access capability depends on the specific network bandwidth, video format, and other factors. The device transmission limit is 600Mbps).

Multi-Channel Video Decoder

It supports decoding up to 4K H.264/ H.265 IP streams and decodes the streams to output 3G-SDI and 4k HDMI. It supports decoding up to 9 channels of videos simultaneously.

(Note: 9 channels with 1080P30, or 8 channels of 1080P60, or 4 channels of 4KP30.)

Transcoder

Kiloview MG300 highlights video transcoding between H.264 and H.265. It can also combine multiple video streams into a merged video and push it to the live broadcast platforms.

Other Functions：

- Support SDI/HDMI embedded audio or 3.5mm analog audio output

- Support audio mixing

- Dual network ports for multi-purpose management

- RTMP Server Supported

- Customizable Output Display

- Video Previewing Function

Applications:

- Multi-platform Live Streaming

- SRT Multi-point Transmission

- Security Monitoring

- Slow Live Streaming

Support » Secure » Access »

U40 - 4K P60 HDMI to NDI Encoder

U40 easily converts 4K P60 HDMI to NDI® high bandwidth.

Kiloview U40 is the smallest while most powerful NDI encoder. With only one cable, video sources from HDMI cameras can easily go into the NDI® world and enjoy the advantages of IP-based transmission.

Both NDI and NDI|HX

With two Ethernet ports, it also converts IP streams such as RTSP, RTMP, SRT, TS-UDP, HLS to NDI|HX, which makes your camera more powerful and versatile.

Audio and Intercom

Kiloview U40 supports 3.5mm analog audio line-in or embedded audio into NDI® It also supports voice intercom based on Kiloview Intercom software.

Mounting in Your Style

When mounting the U40 on a camera, you can either install it upright or horizontally (optional) with a cold shoe accessory.

Tiny, Quiet, and Cool

● 90mm*30mm, round shape, tiny and unique.

● Aluminium shell, built-in high-air-volume fan

● 7x24h working stably

More Features:

● Super PoE with DC Out

● PTZ control over USB

● Camera Link

● Built-in Tally

● USB Expansion

Support » Secure » Access »

KiloLink Server is a centralized Kiloview product management platform based on KiloLink. With KiloLink technology, the KiloLink Server optimizes the process of IP-base video transmission to remotely bulk upgrade, restore, reset, or restart any paired Kiloview products with a  few clicks.

With detailed management modules, you can manage a catalog or a specific device as you need.  Also, you can control the system permission of each user group and a specific user with a super admin account.

Centrally Manage All Your Kiloview Product

Users can manage all Kiloview devices via KiloLink Server, including Kiloview encoders, decoders, NDI converters, Cradle series, etc.

For remote management of multiple devices, KiloLink Server Free provides an efficient workflow, a safer data transmission, and a better user experience.

RUDP Based, Make Transmission Safer

KiloLink Server adopts KiloLink technology, which achieves multi-link aggregated transmission based on the BBR algorithm and RUDP (Reliable-UDP), and ensures that the entire data transmission process is secure & reliable with TLS1.3 technology and multiple encryption methods such as AES-256/AES-128/CHACHA20 available.

Easy to Deploy and Easy to Start

KiloLink Server supports Docker containerized deployment, with only one command, it can be freely deployed on Linux, Windows and other operating platforms, and users can deploy the system in the cloud or for private deployment.

Web Page Login, User Friendly

Simply with Chrome, Edge, Safari, and other web browsers, you can log into KiloLink Server.

More Advantages:

- Directly monitor the status of your devices

- Simply On-click to access the detailed parameters

- Batch manage and upgrades your firmware

- Stable operation with ultra-low resource consumption

Applications:

Suitable for large sports events, multi-location remote interaction and other multi-device application scenarios

Support » Secure » Access »

KILOVIEW Intercom Server (KIS) is a multi-channel communication software supported by WebRTC technology. After logging in to the website, communication between users, devices, or users and devices can be realized, which allows efficient communication during program production.

Multi-Channel Communication Supported

KIS supports up to 32 terminals including all KILOVIEW products and mobile devices (e.g. iPad or phone) through browsers to join in the communications.

Born for All KILOVIEW Products

KIS is compatible with all KILOVIEW products, which means you can definitely turn to KIS for multi-party communication if you have encoders, decoders, or converters at your on-site or hybrid IP-based infrastructure.

Flexible Access & Centralized Management

Compared to other similar software, KIS allows easier access through browsers (Chrome, Microsoft Edge, Safari etc.). Additionally, it grants the administrator centralized control over everything such as who can speak, who needs to be mute, or which channel volume should be increased/decreased.

More Advantages

- SRTP encrypted audio codec ensures secure conversation

- Excellent echo cancellation and noise suppression capabilities guarantee clear, smooth conversation

- The adoption of patented mixer saves hardware sources a lot

- A click to turn on / off the mic; easily adjust its volume

Application

● TV program broadcasting

● Emergency rescue

● Large events

● Remote interaction

● Video conferences

Support » Secure » Access »

Kiloview Multiview Player for NDI® is a multi-screen playback software for NDI® streams.  Simply select any of the NDI sources in your network, up to 20 streams can be displayed in a single window for Multiview with any layout.

Unlimited NDI Sources

Add up to 20 streams on each screen, and unlimited screens for each Multiview player according to your needs and server performance – Either NDI or NDI |HX, Either main or Sub streams.

Self-defined Layout

Setting PIP (Picture in Picture), PBP (Picture by Picture) or grids, you could customize the layout with a simple dragging of the video image with its name and screen size including width, heights, horizontal and vertical line adjustable.

NDI Output

When using the Kiloview Multiview Player to compress multi-picture video into an NDI stream for output, the parameters of the output stream can be adjusted and the output NDI stream can be discovered on the network.

More Advantages:

- Tally control (PVW/PGM)

- Professional Auxiliary functions

- Multi Windows, Multi Screens

- Compatible with various NDI sources

- Save your settings

- Control on any Web page or mobile devices

Applications:

Perfectly suits multi-camera production and security surveillance.

Support » Secure » Access »

Solid State Disks Ltd  - The Industrial Division of the Reactive Group.We deliver innovative system solutions to defense, commercial and industrial customers worldwide. SSDL specialises in the design, development and integration of advanced storage systems.

We design and manufacture the CF2SCSI SCSIFlash and FLOPPYFlash CF based solid-state drives integrating proprietary FPGA based technology which provides further storage future-proofing for critical legacy computer applications.

Support » Secure » Access »

iOMedia Group announces another world first. LNS Cloud 9 – cloud native, custom built for efficient and accurate journalism, and lightening fast publishing to any platform available today or in the future.

LNS Cloud 9 provides the first powerful software and workflow tools for live news and sport planning, input, output, story centric collaboration, OTT and digital publishing. End to end simplicity, efficiency and reliability. With the success of deep culture change experience to harness new technology.

Like our On Premises and Hybrid/ SaaS systems, LNS Cloud 9 workflows have been developed by software savvy journalists and producers who wanted something “better”. iOMedia Group announces another world first. LNS Cloud 9 – cloud native, custom built for efficient and accurate journalism, and lightening fast publishing to any platform available today or in the future.

LNS Cloud 9 provides the first powerful software and workflow tools for live news and sport planning, input, output, story centric collaboration, OTT and digital publishing. End to end simplicity, efficiency and reliability. With the success of deep culture change experience to harness new technology.

Like our On Premises and Hybrid/ SaaS systems, LNS Cloud 9 workflows have been developed by software savvy journalists and producers who wanted something “better”.

Support » Secure » Access »

The VisualOn WatchParty™ is our co-watching solution to change the way viewers engage with video content. Allow viewers to enjoy real-time text, audio, and video chat while watching online LIVE and VoD with friends and family. WatchParty ShowTime™ feature empowers viewers to interact in real-time with celebs, musicians, commentators, athletes, and other VIPs and enhances events commentary and live streaming experience.

Support » Secure » Access »

• Give your users the smoothest in-browser experience, with outstanding playback quality and unique features


• Reduce time to market and costs with object configuration


• Monitor and monetize your service with VisualOn Analytics and Ad management with VisualOn AdFlow


• Get the support, reactivity and timely deliveries you expect from an industry leading provider

Support » Secure » Access »

OnStream MediaPlayer+ provides a set of highly optimized multimedia codecs and a rich set of video & audio formats and streaming protocols supporting all kinds of media servers.

The flexibility of our SDK ensures seamless integration, reduces the cost of deployment and accelerates the time to market, with the best playback quality.

OnStream MediaPlayer+ is available for Android, iOS, tvOS, PC and Mac (NPAPI and PPAPI plugins for browsers, Standalone apps), Smart TVs, STBs

Support » Secure » Access »

• All-in-one SDKs fully API-compatible with Android ExoPlayer, iOS AVPlayer and HTML5


• Including built-in QoS analytics and diagnosis tools for playback session details and field troubleshooting


• Available DRM and AdFlow modules for bundling


• Adding outstanding features while still fully compliant with the native components’ original interfaces


• Pre-tested and validated for ready production


• Flexible support packages backed by hundreds of years of accumulated multimedia experience

Support » Secure » Access »

• Seamless standard-based ad insertion, playback and tracking on all platforms


• Let us manage all the complexity of ad playback for you and reduce your time to market


• Get the best playback experience and a fully efficient ad management to maximize ad revenue and business return

Support » Secure » Access »

Ad Insertion Platform's DAIConnct SSAI platform functions as an enhanced solution to manage server-side-ad-insertions for live and on-demand content. Our technology enables dynamic and personalized insertion of video advertising via HLS and Mpeg-DASH protocols, guaranteeing a best-in-class end-user experience without buffering or latency issues.

DAIConnect Suite is composed of 4 independent components working together to fulfil exact customer needs.

• Ad Break Composer


• DAI Manifest Manipulator


• DAI Optimizer


• DAI Insight

The Ad Break Composer:

The Ad Break Composer is the core component of the solution.

It is in charge among other features to:

• Create, edit and apply rules for each ad break and each user based on multiple parameters.


• Mix ads coming from one or more ad server/SSP combined with optional ad bumpers, interstitials or promos


• Add external and contextual data to target your audience


• Validate creatives and adapt creatives video formats, apply or change tags/categories


• Benefit from the various ad inventory split features (volume, device, SCTE35 event ID ...)


• Adapt the insertion workflow as needed day per day or minutes per minutes without interruption or downtime


• Manage dynamically ad parameters from player query parameters or with default values, per channel, time period, VOD catalogs


• Configurable Ad server prefetching

The DAI Manifest Manipulator:

This component is the processor in charge of the manifest manipulation for SSAI. It is executing the following tasks: 

• Manipulate the HLS or MPEG-DASH manifest for each user to enable one-to-one targeting ad insertion; the Ad Pod created by the Ad Break Composer is inserted for each user session


• Manage multiple HLS tags for ad insertion (#EXT-X-CUE-OUT/IN, #EXT-OATCLS-SCTE35, #EXT-X-DATERANGE-)


• Support HLS versions v3 and higher


• Push on storage ad trackers information for server-side ad tracking


• Insert additional information in the manifest (for client-side tracking for example)


• Provide a monitoring interface to detect any issue coming from the sources, the system itself or third components like ad servers

The DAI Insights

Data is critical for customers and our DAIConnect is the bridge between these two words. This position is ideal to be able to store, analyze and process data coming from the Adtech components or the video delivery part.

DAI Insight provide so features like:

• Validate / Analyze your ad insertion number regarding ad servers


• Get insights on your ad performance and fill rate


• Analyze data regarding audiences even if the CDN delivery is not done by yourself


• Easy dashboard to get insights on audience, device split, ad insertions, etc.


• Transparent data view, available to different parties (Device Manufacturers, Broadcasters / Publisher, Content owner…)


• Allow data storage activation to be able to generate graphs and reports

DAI Optimizer

The main function for this component is to provide services allowing:

• Optimizing the value of the ad inventory by enabling unified header bidding auctions with AIP ad Network.


• Connections to multiple demand sources to retrieve the highest revenue for each opportunity.


• Work with multiple ad partners to sell your unsold inventory at the best price.


• Increase programmatic revenues and fill rate.

Why we are different

For broadcasters and video content providers, an inherent tension exists between the need to deliver a premium viewing experience – complete with start-over and time-shifted TV functionality – and to monetize streaming video offerings and services. The challenge of monetizing over-the-top (OTT) video content will only continue to grow as viewership on connected devices increases.

Ad Insertion Platform goes beyond SSAI and offers an end-to-end solution to meet market demands:

• User Interface, many SSAI solutions are API managed. At AIP, we decided to provide a full-feature platform. It can of course be managed by API, but it has a user-friendly interface allowing not only technical DevOps to work on the platform but also staff coming from the Adtech universe.


• Workflow and orchestration management through the “Ad Break Composer” application. All SSAI have quite basic features, managing ad bumpers, one call to an ad server and a final filler. Our solution provides a workflow editor to create events on a calendar. Each event contains the workflow that the SSAI will do when detecting an ad break. Many features are included as for example Volume Split, that allows to do a specific action or call for x% of the simultaneous viewer and another process for the rest. Or device split, to define what to insert for mobile users for example and what to insert for CTV users that will be different.


• Monitoring: DAIConnect includes a monitoring view allowing to detect any issue on production regarding the input streams, the platform itself or the third parties’ elements like ad servers.


• Statistics and data: Our DAI Insight component allows our customer to retrieve data and statistics about their service. All data can come from the video delivery part (like audiences) or from the Ad tech third parties, like the number of ads inserted, fill-rates, number of missed opportunities, etc.


• One solution for FAST and AVOD. The platform is managing from a simple interface live and VOD offers allowing the customer to have a central solution for both services


• Complex encoding workflow. The solution is natively multi-CDN, DAIConnect proposes a user interface to define the encoding workflow and ad delivery processes.


• Ad reviewing, as the system can call multiple ad servers and can also add ads coming from programmatic, if the customer wants to guarantee that the ads are compliant with their rules, the platform can block non-reviewed ads and is providing an interface to make a visual validation by the user.


• Multi-cloud deployment. The solution runs on multiple public cloud infrastructures like AWS and Google Cloud Platform but can also be deployed on-premises for operators willing to do SSAI on their own infrastructure and CDN.


• Simplicity: we take care of the complexity of ad insertion and bridge the gap between the video delivery infrastructure and the AdTech components, so you can focus on your content.


• Fully agnostic: as we serve as an abstraction layer, we can work with major ad servers, SSPs and DSPs assuring retrieval of all the market demand for your inventory.


• Independency: with our DAIConnect platform your ad pod management is not linked to your ad server, giving you flexibility for the ad break composition rules and logic.


• Transparency: instead of using the “blackbox” SSAI component from your ad server, you can have full control and transparency.


• Cost optimization: changing parameters if your inventory sales are not performing is easy and does not require additional technical integration costs


• Monitoring: we offer full insights and access to aggregated data regarding audiences and ad insertion statistics to analyze your KPI.

Support » Secure » Access »

Kiloview NDI Recorder is an independent recording system to ensure ALL your NDI sources are recorded separately in synchronization status.

Recording ALL NDI Sources, any resolution, any format

• Up to 20 NDI sources recording.


• Recording file in the format of .mov, with fixed-size or fixed length, locally by SSD or Thunderbolt or NAS.

Record in synchronization status

Kiloview NDI Recorder supports self-defined NTP Server to make sure all the NDI sources are recorded in Synchronization status. (Simply one-click synchronization if NDI sources coming from KILOVIEW devices.)

Various Multiview Layouts for Monitoring

1/4/9/16/20 multiview layouts are available for your choice.

Safety Guaranteed

• System Safety: The Kiloview NDI Recording system is an independent recording system that does NOT rely on any other software. We guarantee your videos are recorded continuously, correctly, completely, and independently.


• Operation safety: In order to avoid misoperation and missing valuable recording sources, the system can be LOCKED during recording. Once locked, the system needs DOUBLE confirmation to unlock and pause.

More Functions:

- Hardware Performance Monitoring

- Record in the Fixed Length / Size

- Lable Your Sources

- Auto-discovery of NDI sources

- SSD/Thunderbolt/NAS Storage

Applications:

Perfectly suits multi-camera production and security surveillance.

Support » Secure » Access »

The “CORE” stands for:

Control, Organize, Route and Everything

- Control any NDI signals to any destinations with no hinder.

- Organize all your NDI sources switching from various signals.

- Route limitless input and limitless output

- Everything  you need is an NDI CORE.

Seamless switching experience

Based on the server, the connection to the NDI sources is assured. You may achieve a seamless switching effect without frame synchronization device, making sure that the switch is free of the black screen, splash screen, and lagging.

None-Multicast Distribution.

NDI CORE provides the way of “points-to-points” streaming.It comes with UNLIMITED ingests, UNLIMITED outputs and any processing

More Advantages：

• Permission management and log management


• Multi-service group management


• Compatible with various NDI signals


• Tally/PTZ/Metadata reverse transmission


• Reinforced structure, stable and anti-vibration


• Dual power supply redundancy backup to ensure power supply safety


• High efficiency is guaranteed with physical heat dissipation


• Hardware customization available

Suitable for：

- Multi-party Conference

- Digital Signage

- Advertising Rotation

- Program Production

Support » Secure » Access »

1.   Quasar® is the first native Cloud file QC service that helps users perform file-based QC on cloud assets with ease. Encompassing all the features of Pulsar and built natively for the cloud, Quasar® promises the fastest rate of QC in the cloud. It offers dynamic scaling with ability to process hundreds of assets at the same time. It provides stringent content security measures such as IAM roles support, Pre-authenticated URL and Whitelisting. Quasar® is offered as a SaaS service wherein Venera runs & manages the Quasar infrastructure. Users can integrate Quasar using REST API or can use the system manually via web browser. Tiered usage-based subscription plans are available for different content volume needs. Quasar® supports all major broadcast formats, IMF/DCP packages as well as VOD formats such as adaptive bitrate formats. Quasar also allows users to perform advanced QC checks for HDR along with Photosensitive Epilepsy validation using the industry defacto standard Harding PSE.

Support » Secure » Access »

CapMate – Captions QC & Correction platform automatically identifies issues in Captions/Subtitles and allows users to perform auto correction and export the rectified captions. CapMate ensure that your captions or subtitles are compliant with corresponding specifications such as SCC, IMSC, TTML etc. and validates captions/subtitles for major content delivery platforms such as Netflix, Amazon Prime, Disney+, HBO and many others. It helps you identify the sync issues and captions/burnt-in text overlap with options for Auto/Manual Correction. It allows you to quickly spot the abusive/curse words in the Captions/Subtitles and replace them with characters of your choice. CapMate comes equipped with a rich browser-based review and correction system. Captioning aspects such as Duration, Characters per line, Words per minute, Successive captions overlap, and many more can be validated and rectified with CapMate in time & cost efficient manner.

Support » Secure » Access »

Easy video gathering starts here! iReporter revolutionizes news reporting by building an active digital community. Turn your audiences into your crowd reporters and be the first in the field!

 

Examples of UGC sharing could include:

• STRINGER ENGAGEMENT


• WEATHER CAST


• CROWD REPORTING


• FAN ENGAGEMENT


• TRAFFIC UPDATES

 

Key features

• Custom branding

Turn the iReporter mobile app into your own product, using your logo, name and accounts under which the app will be registered in the official stores.

• Full video quality

You will get the highest possible quality, shot by the phone used. No further compression is used on the way to your facility.

• Full video copyrights

You will have full video copyrights. Every contributor must accept the Terms & Conditions prior to the first use of the app.

• PWA mobile app

No installation and registration! Viewers can send you videos using link or QR code only​!

• Fair pricing

Cost effective way of gathering videos​ from wide public.

• Contributors targeting

Notify users in the selected area using the map. Immediate contact with an immediate response. Be the first in the field!

 

Support » Secure » Access »

Planning. Teamwork. Plasticity.

 

KO:R is a multiplatform cloud-based planning and collaboration tool designed to allow teams to collaborate remotely by sharing files, tasks, incoming information, and other spaces available for content creation.

Watch our latest webinar to learn the ins and outs of our planning and collaboration tool.

Key features

• Planning

Plan using shared resources and common spaces to generate quality content. Create tasks, assign people or teams to work on it, and monitor their progress.

• Teamwork

As a cloud-based solution KO:R enables you to collaborate from anywhere, at any time, and with anyone. You can even work with people outside your organization.

• Plasticity

Make it yours! Personalize your spaces and settings according to your workflows. Choose only the modules you need, don’t pay for the rest.

Support » Secure » Access »

Pulse-IT enables you to translate, optimize, execute and monitor your business and broadcast processes and workflows. Pulse-IT includes simple tools for complex situations built with bundled task templates or extended with minimal code that can be performed immediately or as scheduled jobs. All execution is managed via a comprehensive, real-time, secure dashboard accessible from anywhere in the world.

Support » Secure » Access »

Share-IT simplifies the creation and publishing of static and motion Adobe graphics to Avid MediaCentral and Avid based systems.

Support » Secure » Access »

Skylark is the video platform solution that empowers businesses to build and scale world class streaming platforms, with ultimate flexibility.

Publishing tools were built for written content, video is different. Skylark was developed by a team that's been creating innovative video streaming products for over 15 years. It’s video first and has the tools that you'll need now and as you grow.

According to PWC only 12% of consumers say they are able to find content on streaming platforms easily. With Skylark you can schedule streaming content to appear to the right audience at the right time, maintaining relevance for existing users and making new ones feel right at home.

When it comes to standing out, differentiating yourself in a saturated market can be challenging. With Skylark you have creative control, you own your UI. So, you can build your front end in house or with an agency.

Skylark also enables you to expand without boundaries. You can meet the needs of your growing audience at a pace that suits your business. Deliver authentic experiences to your users no matter where they are or how they're watching.

 

Talk to us about your video platform challenges and see what Skylark can do for you.

 

Support » Secure » Access »

Learn about how to integrate your OTT across android, iPhone, tablet, desktop, Roku tv, etc. Here you can find Video Streaming / IPTV / OTT Integration.

Support » Secure » Access »

Through this blog, we’ll walk you through everything you need to know about the must-have security protocol DRM and all the best security tactics of DRM video which you can use to add multiple layers of protection to your digital assets.