Uready 1u Single Display - IABM Single BaM Product

Your digital signage solution is only as useful as it is usable for your team.  Work with our digital signage experts to design and configure the system that meets your communication, business, and team needs. Whether you’re looking to entertain with streaming live video, engage with touchscreens, alert with emergency notifications or inform with wayfinding, you can find the exact players, content management system, and accessories from the comprehensive iCompel® Digital Signage product portfolio.

 iCompel® is the ideal digital signage solution for:

 • Classrooms & hallways

• Quick-service restaurants

• Retail

• Doctors offices and hospitals

• Corporate office centers

Building on the success of our horizontal PDUs, used by major broadcasters worldwide, TSL Products introduces a range of vertical power distribution units (VDPUs).

Save Space and Money: The new vertical design utilises unique individually fused IEC Connectors to provide the highest density available, allowing you to save valuable rack space. The design also features low energy consumption for a leaner, greener and more space efficient rack room. The new VPDU has dual 32A inlets, with each inlet powering twenty individually fused C13 outlets.

Features:

• Dual 32A inlets, with each inlet powering twenty individually fused C13 outlets.


• High density means the overall unit is only 1767mm.


• Each Outlet is individually fused and has its own status LED.


• A and B Outlets are easily identfiable through the colour coding of status LEDs.


• Easy mounting from rear on sides for extra flexibility and ease of installation.

Our Power Management family has been designed to address the challenges faced by systems managers to effectively maintain system viability, control critical power infrastructures – over local or international networks – to meet targets and increase ROI.

Features:

• Dual input seamless auto changeover


• 14 way fused IEC outlets


• Master input setup button with dual tri colour status LEDs


• Input status monitoring GPO on rear D9 connector


• Tri-colour LED input and power indicators


• Rounded cable tie bar

Facilities are generating ever more data, and although this information is readily available from individual devices, it is cumbersome to access and report on when using numerous manufacturer specific portals. Real-time data is hugely beneficial in the daily running of any facility – minimising down-time and decreasing power consumption - as long as it is accessible from a single point where it can be analysed as a whole, rather than having to access and report from individual manufacturer-specific portals.

InSite is a vendor independent solution that brings all of this information together into a single system using industry standard protocols such as SNMP and Modbus.

It can be hosted on premises or in the cloud and will work with a broad range of third party manufacturer of sensor and data centre equipment - in fact any manufacturer who produces object identifier (OID) information.

DID YOU KNOW? InSite can be configured to provide a protected whole system view for central monitoring and individual subsystem viewer for local system monitoring.

The MDU12-PMi is a Power manager mains distribution unit, 12 way, 16 x GPIs, ethernet output monitoring and alarms – email and SNMP, individually controlled latching relays, sequential & delay power up with current sense network monitoring

Features:

• Remote Ethernet control of 12 separate outputs via secure web browser


• Overall Status page showing individual & total power consumption


• Power Factor Monitoring


• Sequential, immediate or user configured delayed output startup


• Ethernet input power failure alarm


• Internal temperature sensor with SNMP alarm


• Unit and SNMP configuration via secure web browser interface


• Front Panel LAN status LED


• Tri-colour output status LEDs


• Rounded cable tie bar


• Supplied with Powercon Input connector


• Tri-colour front panel using status LEDs for rapid failure identification


• Intuitive Graphic User Interface (GUI) for ease of set-up


• Self contained operation with all software and hardware functions

Built on 20+ years of broadcast control experience, Flashboard helps to better coordinate and organise production workflow, delivering essential operational information and replacing separate clocks, cue lamps, production timers and printed paper within a unified system. This means a more efficient workflow with fewer opportunities for error.

• Modular – grow the systems as your requirements increase.


• Quick setup – simply plug in to your network.


• Dynamic display – show multiple actions on one screen.


• Customisable – easy to design and configure.


• Interface – compatible with TallyMan and third party control systems.


• Pre-prepared designs - achieve the perfect match for your needs.

VClock is a replacement for the clocks and lights panel that was traditionally found on the wall of a radio studio. It's a software application that can be controlled by external devices (such as GPIs, serial or IP data, http posts and snmp traps).  It natively supports Axia Livewire, Wheatstone Wheatnet and Ember+ (DHD / Lawo consoles) and many more.

The basic clock can tell the time in analogue and digital formats, tell you the way to say it (in English or other languages, or you can create your own), and backtime to several junctions in the hour. It can have your station logo on the clock, and each lamp can also have an image rather than a caption. It has up to 32 lamps which are completely configurable and can be turned on / off or made to flash when external triggers (such as a "mic live" signal from a mixing console or a phone call) tell it to.

VClock also has an embedded webbrowser, which allows you to show any content that you like on VClock, simply by creating a webpage.

The intelligent scripting language allows you to change the colours/states of the lamps, clock and background at startup, and can be made to completely change all settings upon reception of a trigger.

Don't miss our other related products, AudionicsGateway, VMeters and VScroll, which are a perfect addition to VClock (and equally work very well on their own!).

VClock is available as a free download which is fully functional apart from the inability to change the caption / add an image, and use of the external interfaces (GPI, serial, IP) to control the on-screen lamps is limited to only 10 commands before the clock needs to be restarted. An "unlicenced" message appears on the face of the free version.

Equipped with the technological power of AI, Digital Nirvana’s MonitorIQ 7.0 provides new capabilities for compliance logging and monitoring. Known as the industry’s most reliable, secure, and easy-to-use broadcast monitoring and compliance logging platform that allows operators to record, store, monitor, analyze, and repurpose content quickly and efficiently with a minimum of clicks. MonitorIQ enables broadcasters to collect and use knowledge about their broadcast content to meet a wide range of regulatory and compliance requirements. Version 7 of the Digital Nirvana platform gives broadcasters access to valuable next-generation content processing and analysis tools.

VMeters is level meter software with a difference. It can show the audio level for many audio channels, in Mono or Stereo, in either vertical or horizontal bars (PPM meters to follow soon). The difference is that it can also connect to another VMeter instance across a LAN or WAN and mirror the level information on remote machines.

The data passed between instances is very small, meaning no large bandwidth requirements and no streaming delays - you see the level information "live". Useful for transmitter monitoring for example, when you can't hear all of your transmitters from your location.

Vmeters can read audio levels from an audio card/driver, but also natively from Axia XNodes/Studio Engines, ProntoNet codecs and Tieline Codecs, saving on wiring and costly extra audio cards / XNode outputs to feed them.

You can configure how many meters to show, the layout, the design, whether it displays channel names, the responsiveness of the meters and so on. It was originally designed to display nicely on top of its sister product VClock, but equally can be used standalone.

Vmeters can alert you to silence by email or http post, which can light lamps on VClock in the studio for example.

VMeters is available as a free download to trial. It is fully functional for 15 minutes, after which any server meters will stop reading audio levels. The app will need to be restarted for it to start working again.

Licenses are only required for the "master" meters (reading from an audio card, XNode etc).  The "slave" meters (repeating a "master") are free.