RF Components

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems' Alto series of amplifiers provide excellent RF performance in a modular design, with a variety of chassis and modules which can be configured to suit a range of applications. The Amplifiers can be fixed gain, variable gain, with dual redundant amplifiers also available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems Dextra range of RF splitters and combiners has been designed for high resilience RF distribution and combining of uplink and downlink satellite signals.

Active splitters and combiners are available as 4-way (single & dual), 8-way (single & dual) and 16-way. The range benefits from excellent RF performance and a compact form factor, as well as advanced functionality including; web enabled control and monitoring, LNB powering and an option for dual redundant amplifiers for added resilience. All models are equipped with a -20 dB SMA monitor port on the front panel.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The new generation Enigma Broadband matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity.

The Enigma is a distributive (full fan-out) Matrix. The Enigma Matrix is housed in a 6U 19" rack enclosure and has a module capacity of 32 inputs x 32 outputs and can be part populated to any size. It's new capacitive touchscreen provides ease of use and additional durability. Now in its 4th generation, the Enigma broadband Matrix (50-2450 MHz) has proved to have genuinely high performance with excellent flatness or frequency response, excellent isolation, and linearity - a truly leading edge L-band Router. The Enigma L-band Switch matrix can also be incorporated into an overall automatic redundancy Network Management System to enhance the resilience of the overall earth station equipment.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's range of Falcon Frequency Converters Downconvert or Upconvert RF signals, and are available as agile or block converters. The compact 1U Falcon chassis has capacity for up to five conversion modules, which are field serviceable and replaceable. Resilience is also provided from hot-swap dual redundant power supplies and a field serviceable CPU.

The ETL Falcon Frequency Converter offers multiple module configurations, with a range of frequency options, as well as agile or block upconverters and downconverters. The 1U chassis has capacity for up to five conversion modules, which are field serviceable and replaceable. Resilience is also provided from hot-swap dual redundant power supplies, (optional) hot-swap redundancy switch modules and a field replaceable CPU.

A 10MHz reference source is provided for internal/external signals. 2+1 and Redundancy configurations (1+1 and 2+1) are also available within the converter chassis, meaning that a separate chassis for redundancy is not required. Request a quote for a frequency converter here.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems Griffin Redundancy Switch provides signal redundancy for satellite modulators, downconverters, or modems, enabling switching to a standby path when an error occurs.  The switching can be triggered by front panel alarm contacts upon RF level detection or connected to a Network Monitoring Solution. The switch can be used for both downlink and uplink applications as well as managing RF and ASI signal types.

ETL’s Griffin redundancy switch offers total flexibility in managing RF, ASI and optical signals. The modular design comprises a 1U chassis with 2 switch module slots. Different modules can be fitted dependent on application, and can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection, alarm contacts, pulsed voltage or NMS. The Griffin switch is suitable for satellite modulator, LNB/down converter and modem redundancy applications.

 

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Model HAR-40, Harrier 128 x 128 L-band RF matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. ETL's ultra compact 10U Matrix also has integrated LNB powering.

The configurable matrix design offers a range of input and output modules (IO modules) including our standard passive input or output module, variable gain, fibre input & LNB power modules.  The Harrier is a distributive (full fan-out) Matrix with a module capacity of 128 inputs x 128 outputs with features to suit specific RF needs for each satellite feed. The matrix can be expanded from 8x8 up to 128x128 in blocks of 8.  A variety of impedances and connector types are available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Extended L-band (500-2450MHz) Hawk Matrix is ideally suited for RF signal routing at LEO and MEO gateways, as well as small HTS ground stations and deployable VSAT terminals. The 1U Hawk Matrix has capacity for two 8x8 matrix cards – which can be combining (fan-in) or distributive (fan-out) – for uplink and downlink applications.  It can be fitted with any combination of cards depending on application, but is ideally suited for smaller gateways with multiple modems and one or two antennas. Single 8x16 & 16x8 configurations are also available.

The Hawk Matrix delivers flexible module configurations - providing routing solutions with dual 8x8 distribution modules, dual 8x8 combining modules or a combination of distributive and combining modules. It provides reliability in service with dual redundant hot-swap power supplies and CPU, and field serviceable and replaceable matrix modules. The Hawk Matrix is touchscreen with remote connection via RJ45 Ethernet ports. A Web Browser interface is provided as standard with the Hawk L-band Switch Matrix. Its extended bandwidth is suitable for HTS applications.

Typical Applications:

• Small Ka/HTS gateaway terminals

• LEO/MEO gateways

• Oil & Gas

• Deployable VSAT terminals

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's Hurricane 64 x 64 L-band RF matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. ETL's ultra compact 4U Matrix also has integrated LNB powering.

The Hurricane is a distributive (full fan-out) Matrix with a module capacity of 64 inputs x 64 outputs with features to suit specific RF needs for each satellite feed. Offering optional integrated LNB powering, optical fibre inputs, via compatible IP modules. The matrix can be expanded from 8x8 up to 64x64 in blocks of 8.

A variety of impedances and connector types are available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's wide range of RF components is designed and manufactured at the ETL factory. Covering DC to 40GHz, these are at the heart of many of our 19" Rack Systems. A key feature of many of ETL components is the ability to pass or block a 10 MHz signal or DC voltage through the products, which can be used to power interconnecting components or pass a stable frequency reference to a LNB or BUC within the system.

ETL's subsidiary company, Atlantic Microwave also provides a range of Microwave & RF Components including cable assemblies, amplifiers & oscillators, passive and control components.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's StingRay RF over Fibre (RoF) inter facility links (IFL) convert high quality RF to optical signals over single mode fibre from, for example, a satellite antenna to reception equipment room, up to 10 km away, with options for distances up to 100's of kilometres. ETL'S Stingray RF over Fibre solution offers fibre links from 10km up to 500km in distance whilst drastically reducing signal loss.

CWDM modules (coarse wavelength division multiplexing) provide up to 50km transmission compact fibre links, with eight wavelengths on a single fibre cable. DWDM modules (dense wavelength division multiplexing) provide up to 500km transmission fibre links and beyond using optical amplification (EDFA), with up to forty wavelengths on a single fibre cable. ETL can also offer a solution for ultra-compact requirements or for smaller applications such as a single antenna. Our range is split in to 100 series and 200 series RF to optical alternatives.

• The 100 series range offers up to 16 RF over Fibre links in a 1U chassis.


• The 200 series range offer twin module options; where 2 separate links are provided on one module (therefore providing up to 32 feeds in a single 2U chassis) or with a -20 dB monitoring port for SIGNAL MONITORING.

ETL's standard 100 series and 200 series RF over Fibre modules provide AGC (Automatic Gain Control) with automatic link optimisation for FAST SET-UP or wide dynamic range links with FIXED GAIN FOR INPUT POWERS UP TO +6 dBm.

If you require  ENHANCED RESILIENCE  our StingRay RF over Fibre range offers 1+1 redundancy and 4+1 or 4+2 redundancy systems.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

NOVELSAT Xstream Multi-Purpose Gateway is the ideal choice for multiple interfaces satellite networks requiring any-to-any high-speed connectivity solution. Addressing multiple applications including video delivery, Earth observation, SIGINT, Cloud and IoT, NOVELSAT Xstream delivers highly integrated, optimized, and efficient multi-interface solution.

NOVELSAT Xstream features modular design according to network needs, allowing for multiple configurations and service options.

NOVELSAT Xstream maximizes network flexibility and scalability, adapting to any network architecture and allowing future upgrades and expansions.

NOVELSAT Xstream provides multi-layer content protection, securing service, transport, and payload.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Es'hailSat is well positioned to serve Government connectivity requirement through Es'hailSat's high powered Ku-band Payload and it's state of the art teleport infrastructure. Coupled with good knowledge on available satellite products in the market, Es'hailSat is be able to design a dedicated solution tailored to fit all requirements from Government entities.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Smartphones and tablets have changed our lives dramatically, and demand for mobile communications are extremely high. Es’hailSat offers mobile connectivity for land and maritime applications to cater for requirements from various verticals.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Using our new high-tech teleport and established partners within the region, Es’hailSat provides video playout, compression, encryption, uplink and distribution services.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Leveraging on Es'hailSat wide coverage in MENA, Es'hailSat enables communication with various location be it on land and sea. The flexibility to connect either directly between two location in point to point connectivity or multiple location to a central location in a point to multipoint scenario offers endless possibility of connectivity option supporting services such as Cellular backhaul, enterprise network or even dedicated connectivity requirement tailored to customer needs.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Es'hailSat offers a variety of VSAT services to support customer's most demanding needs, whether it is an end user, small business or multi-national corporation. Complementing our satellite and teleport solutions is our strategic partnership with major telecommunication providers for MPLS and IP backbone to provide managed bandwidth services.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Broadcasters can use Es’hailSat’s high powered Ku-band payload to provide consumers with high quality services such as Direct-to-Home (DTH) linear TV, video on demand, high definition TV and 4K TV. 25.5⁰E / 26.0°E neighborhood allows viewers to tune their receivers to Es’hail-1 and Es’hail-2, without the need to change or repoint their existing dishes to enjoy premium content.

Publish » Content Protection » Content Protection & Encryption » CAS, encryption, DRM »

The X Platform is a high-capacity, versatile, ultra-low latency platform for high-speed video networking, enhanced IP security and advanced compression for the remote production, contribution and distribution markets.

Publish » Content Protection » Content Protection & Encryption » CAS, encryption, DRM »

The XC Platform is the modular head-end platform for IPTV and broadcast, supporting content acquisition, compression, stream processing including scrambling and multiplexing, with distribution options for cable, satellite and terrestrial networks.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's wide range of RF components is designed and manufactured at the ETL factory. Covering DC to 40GHz, these are at the heart of many of our 19" Rack Systems. A key feature of many of ETL components is the ability to pass or block a 10 MHz signal or DC voltage through the products, which can be used to power interconnecting components or pass a stable frequency reference to a LNB or BUC within the system.

ETL's subsidiary company, Atlantic Microwave also provides a range of Microwave & RF Components including cable assemblies, amplifiers & oscillators, passive and control components.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The new generation Enigma Broadband matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity.

The Enigma is a distributive (full fan-out) Matrix. The Enigma Matrix is housed in a 6U 19" rack enclosure and has a module capacity of 32 inputs x 32 outputs and can be part populated to any size. It's new capacitive touchscreen provides ease of use and additional durability. Now in its 4th generation, the Enigma broadband Matrix (50-2450 MHz) has proved to have genuinely high performance with excellent flatness or frequency response, excellent isolation, and linearity - a truly leading edge L-band Router. The Enigma L-band Switch matrix can also be incorporated into an overall automatic redundancy Network Management System to enhance the resilience of the overall earth station equipment.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Model HAR-40, Harrier 128 x 128 L-band RF matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. ETL's ultra compact 10U Matrix also has integrated LNB powering.

The configurable matrix design offers a range of input and output modules (IO modules) including our standard passive input or output module, variable gain, fibre input & LNB power modules.  The Harrier is a distributive (full fan-out) Matrix with a module capacity of 128 inputs x 128 outputs with features to suit specific RF needs for each satellite feed. The matrix can be expanded from 8x8 up to 128x128 in blocks of 8.  A variety of impedances and connector types are available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems Dextra range of RF splitters and combiners has been designed for high resilience RF distribution and combining of uplink and downlink satellite signals.

Active splitters and combiners are available as 4-way (single & dual), 8-way (single & dual) and 16-way. The range benefits from excellent RF performance and a compact form factor, as well as advanced functionality including; web enabled control and monitoring, LNB powering and an option for dual redundant amplifiers for added resilience. All models are equipped with a -20 dB SMA monitor port on the front panel.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems Griffin Redundancy Switch provides signal redundancy for satellite modulators, downconverters, or modems, enabling switching to a standby path when an error occurs.  The switching can be triggered by front panel alarm contacts upon RF level detection or connected to a Network Monitoring Solution. The switch can be used for both downlink and uplink applications as well as managing RF and ASI signal types.

ETL’s Griffin redundancy switch offers total flexibility in managing RF, ASI and optical signals. The modular design comprises a 1U chassis with 2 switch module slots. Different modules can be fitted dependent on application, and can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection, alarm contacts, pulsed voltage or NMS. The Griffin switch is suitable for satellite modulator, LNB/down converter and modem redundancy applications.

 

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's range of Falcon Frequency Converters Downconvert or Upconvert RF signals, and are available as agile or block converters. The compact 1U Falcon chassis has capacity for up to five conversion modules, which are field serviceable and replaceable. Resilience is also provided from hot-swap dual redundant power supplies and a field serviceable CPU.

The ETL Falcon Frequency Converter offers multiple module configurations, with a range of frequency options, as well as agile or block upconverters and downconverters. The 1U chassis has capacity for up to five conversion modules, which are field serviceable and replaceable. Resilience is also provided from hot-swap dual redundant power supplies, (optional) hot-swap redundancy switch modules and a field replaceable CPU.

A 10MHz reference source is provided for internal/external signals. 2+1 and Redundancy configurations (1+1 and 2+1) are also available within the converter chassis, meaning that a separate chassis for redundancy is not required. Request a quote for a frequency converter here.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's StingRay RF over Fibre (RoF) inter facility links (IFL) convert high quality RF to optical signals over single mode fibre from, for example, a satellite antenna to reception equipment room, up to 10 km away, with options for distances up to 100's of kilometres. ETL'S Stingray RF over Fibre solution offers fibre links from 10km up to 500km in distance whilst drastically reducing signal loss.

CWDM modules (coarse wavelength division multiplexing) provide up to 50km transmission compact fibre links, with eight wavelengths on a single fibre cable. DWDM modules (dense wavelength division multiplexing) provide up to 500km transmission fibre links and beyond using optical amplification (EDFA), with up to forty wavelengths on a single fibre cable. ETL can also offer a solution for ultra-compact requirements or for smaller applications such as a single antenna. Our range is split in to 100 series and 200 series RF to optical alternatives.

• The 100 series range offers up to 16 RF over Fibre links in a 1U chassis.


• The 200 series range offer twin module options; where 2 separate links are provided on one module (therefore providing up to 32 feeds in a single 2U chassis) or with a -20 dB monitoring port for SIGNAL MONITORING.

ETL's standard 100 series and 200 series RF over Fibre modules provide AGC (Automatic Gain Control) with automatic link optimisation for FAST SET-UP or wide dynamic range links with FIXED GAIN FOR INPUT POWERS UP TO +6 dBm.

If you require  ENHANCED RESILIENCE  our StingRay RF over Fibre range offers 1+1 redundancy and 4+1 or 4+2 redundancy systems.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

The ETL Systems' Alto series of amplifiers provide excellent RF performance in a modular design, with a variety of chassis and modules which can be configured to suit a range of applications. The Amplifiers can be fixed gain, variable gain, with dual redundant amplifiers also available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Extended L-band (500-2450MHz) Hawk Matrix is ideally suited for RF signal routing at LEO and MEO gateways, as well as small HTS ground stations and deployable VSAT terminals. The 1U Hawk Matrix has capacity for two 8x8 matrix cards – which can be combining (fan-in) or distributive (fan-out) – for uplink and downlink applications.  It can be fitted with any combination of cards depending on application, but is ideally suited for smaller gateways with multiple modems and one or two antennas. Single 8x16 & 16x8 configurations are also available.

The Hawk Matrix delivers flexible module configurations - providing routing solutions with dual 8x8 distribution modules, dual 8x8 combining modules or a combination of distributive and combining modules. It provides reliability in service with dual redundant hot-swap power supplies and CPU, and field serviceable and replaceable matrix modules. The Hawk Matrix is touchscreen with remote connection via RJ45 Ethernet ports. A Web Browser interface is provided as standard with the Hawk L-band Switch Matrix. Its extended bandwidth is suitable for HTS applications.

Typical Applications:

• Small Ka/HTS gateaway terminals

• LEO/MEO gateways

• Oil & Gas

• Deployable VSAT terminals

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

ETL's Hurricane 64 x 64 L-band RF matrix is used to provide flexibility in the routing of antennas to receivers or modems; to allow remote routing of satellite signals to receivers or modems; and to help optimise the use of receiving capacity. ETL's ultra compact 4U Matrix also has integrated LNB powering.

The Hurricane is a distributive (full fan-out) Matrix with a module capacity of 64 inputs x 64 outputs with features to suit specific RF needs for each satellite feed. Offering optional integrated LNB powering, optical fibre inputs, via compatible IP modules. The matrix can be expanded from 8x8 up to 64x64 in blocks of 8.

A variety of impedances and connector types are available.

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

TICO-XS is a disruptive, innovative, visually lossless, light-weight and line-based compression technology, specifically designed to be used instead of uncompressed video in many applications. It is currently under standardization as JPEG XS.

TICO-XS is a smart upgrade path to manage higher resolutions (4K, 8K, …) and frame rates while assuring visual quality, keeping power and bandwidth at a reasonable budget and significantly reducing the complexity and cost of a system, a chip or an infrastructure.

 

Applications:

From 3G-SDI to IP in 4K

The mapping of the TICO-XS mezzanine compression to carry UHDTV 4K 60P over a single 3G-SDI cable has been specified in the SMPTE RDD35. intoPIX provides the needed building blocks to create a 4K over 3G-SDI solutions. Have a look at the intoPIX TICO-XS IP-cores and peripheral IP to map the compression over SDI.

 

4K with TICO compression over SMPTE2022-6

As SMPTE ST2022-6, defines the transport of HD-SDI or 3G-SDI over IP, using TICO-XS, it is easy to leverage an existing SMPTE 2022-6 system to carry up to three UHDTV 4K 60P streams over a single 10 GbE port using the SMPTE 2022-6 standard.

 

SMPTE 2110 and TICO compression

SMPTE ST2110-22 specifies the transport of compressed video over IP (including JPEG-XS), enabling you to transport any video formats over IP with full flexibility and all the benefits of TICO-XS compression.

 

8K over a single 10GbE

It has already been proven. TICO-XS can enable you to carry with lossless quality a 8K 60fps video stream over a single 10GbE link using TICO RTP payload and a SMPTE 2110-22 transport.

 

8K over a single 12G-SDI

It has already been proven. TICO-XS can enable you to carry a 8K 60fps video stream over a single 12G-SDI link with lossless quality.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

CPI products generally have the following available options:

*LifeExtender/LifePredictor - extend TWT life by as much as 50%

*Uplink Power Control - automatically maintains the same signal strength no matter the weather condition

*L-Band BUC - some have dual or multiband capability, enabling 1000 MHz transmission over different frequencies within the overall frequency band.

*Air cooled or liquid cooled capability

*Ethernet interface in addition to serial interface

*MCC technology is standard on our new GaNLink SSPAs, enabling you to meet your link budget as planned.

*Integral linearizer

*Remote control unit

Please contact CPI if you are unsure of whether the amplifier that you are interested in has any of these options.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Latest generation DVB-S2X, DVB-S2, DVB-DSNG and DVB-S modulator designed and built from the ground up for multimedia contribution, broadcast direct-to-home and primary distribution to headends and towers.

Key features:
DVB-S2X, DVB-S2 and DVB-DSNG/S compliant
QPSK, 8PSK, 16/32/64/128/256APSK
Baud rate range: 0.05 – 72 Mbaud
Data rates up to 425 Mbit/s (in multistream mode)
Data rates up to 216 Mbit/s (in single stream mode)
Exceptional jitter recovery on TS over IP inputs
Automatic rate synchronization on TS over IP inputs
Null packet stuffing rate detector on incoming TS
Built-in TS Analyser with PCR jitter measurements and monitoring of critical ECM/EMM messages
RFI reduction using optional DVB RF Carrier ID (DVB-CID) and NIT table CID (default)
Optional BISS Content protection
Optional redundant ASI transport stream interfaces
Redundant GbE interfaces with SMPTE 2022-1/2 FEC error correction
Built-in source redundancy, supporting any redundant IP network configuration
External reference input
IF (70/140) and L-Band (950-2150) high power outputs
Optional integrated RF upconverter (Ku-band or C-band)
L-band monitoring output
Market leading RF purity and performance
Clean Channel Technology®
Optional linear and non-linear Equalink® 3 Pre

Main advantages:
Support of the latest and most efficient DVB-S2X standard
Highest system reliability and service uptime through robust design and industry leading redundancy solutions
Low total cost of ownership as a result of very high bandwidth efficiency technology options, and ease of monitoring and control
Clean Channel Technology® provides up to 15% bandwidth efficiency gains on top of the DVB-S2 standard
Equalink® 3 pre-distortion provides up to 10% bandwidth gains, higher QoS or geographic coverage
Built-in support for opportunistic data insertion, interoperable with IRD’s that support Multi Protocol Encapsulation (MPE)
Easy integration with industry leading management systems (EMS/NMS/OSS)
Safe investment as the platform supports advanced capabilities such as proMPEG FEC on inputs and outputs, built-in transport stream analyzer and DVB & NIT Carrier ID
Pay-as-you-grow flexible licensing scheme
Future-proof design combining video and IP multi-service capabilities, supports transport of today´s and tomorrow´s services
Dedicated Graphical User Interfaces for single stream and multistream applications:
- For your single stream applications: M6100 Broadcast Satellite Modulator R2.11
- For your multistream projects: M6100 Broadcast Satellite Modulator R2.1

Publish » Internet Distribution » Internet Distribution » Content delivery networks (CDNs) »

IP Transit allows you to create a global network. Optimize connectivity with access to a blend of the best ISPs in every region and more than 15 Tbps of bandwidth spanning long-haul routes and intra-regional connections. You can improve digital user experience on six continents, including emerging markets like China, India, Brazil, Indonesia, and many more with Zenlayer’s global network.

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

Cloud Networking allows you to create a network on demand with instant connections to data centers and clouds

• Performance


• Reduce latency & jitter by up to 40% during peak periods (vs. public Internet)


• Zero packet loss


• High availability

Connectivity

• Quickly build hybrid-or multi-cloud environments to meet business needs


• Directly connect to public clouds and SaaS

Elasticity

• Scale up or down depending on demand


• Choose from 1 Mbps to 10 Gbps

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Dense DVB-S2X multi-carrier satellite gateway for efficient distribution to towers and head-ends or for use in back-up or dense DTH HUB stations, resulting in OPEX and CAPEX savings.

Main advantages:
The Newtec MCX7000 is a new dense DVB-S2X multi-carrier satellite gateway for efficient distribution to towers and headends, or for use in back-up or dense DTH HUB stations, resulting in OPEX and CAPEX savings. This 133 Mbaud modem is also fit for broadcast contribution applications on standard and HTS spotbeam transponders.

Compatible with the Newtec Dialog® multiservice broadcast platform, it brings increased bandwidth efficiency of up to 51% and features multistream, as well as Newtec's Clean Channel Technology® and its linear and non-linear pre-distortion technology Equalink® 3.

Building upon the MDM6100 Broadcast Satellite Modem software suite, the enhanced hardware platform of the MCX7000 extends the modem capabilities beyond single carrier support.

In a multi-modulator configuration, four 133 Mbaud carriers acc. DVB standards up to DVB-S2X can be generated. Efficient transmission of UHDTV bouquets over 2 or 3 transponders for DTH only requires the Channel Bonding license.
In a multi-demod modem configuration, two 133 Mbaud carriers can be demodulated, next to modulation of a 133 Mbaud signal with full support of the DVB satellite standards up to DVB-S2X. Each and every Transport Stream embedded in one of the received carriers can be output on one of the six (optional) ASI or dual Ethernet ports. The same data interfaces can be used as input ports for the modulator.
Transmodulation of a received stream is also an option.
Its remote in-band management and software upgradeability makes it the receiver equipment of choice for remote unattended towers and headends. Subsequent releases of this future-proof DVB-S2X platform guarantee, by simple software upgrade, even increased functionality and higher density.

Key features:
Maximum configurations:
- 4 x DVB-S2X carrier modulator
- 3 x DVB-S2X carrier modulator with optional ASI interfaces
- 2 x DVB-S2X carrier modulator and one demodulator with optional ASI interfaces
- 3 x DVB-S2X carrier demodulator (with dual L-band input)
- 2 x DVB-S2X carrier demodulator with one modulator and optional ASI interfaces
Minimum symbol rate: 256 kbaud
Maximum symbol rate: 133 Mbaud
Data rates up to 425 Mbit/s
IF (70/140) and L-Band (950-2150) high power outputs
Very high bandwidth efficiency, ease of monitoring and control leads to Low Total Cost of Ownership
- DVB-S2X, DVB-S2, DVB-DSNG/S compliant
- QPSK, 8PSK, 16APSK, 32APSK, 64APSK, 128APSK and 256 APSK
- Up to 15% bandwidth gain with optional Equalink® 3 pre-distortion
- Up to 15% bandwidth efficiency gains (on top of DVB-S2) with Clean Channel Technology®
- Multistream CCM or VCM mode with ISSY
Highest system reliability and service uptime
- Redundancy with main TS over ASI and back-up TS over IP input
- Optional Seamless Switching acc. SMPTE 2022-7 on TS over IP inputs
- Carrier-based redundancy switching in a multiple modulator 1:1 configuration
- TS null packet stuffing detector
- Built-in TS Analyser with PCR jitter measurements
- RFI reduction using optional DVB RF Carrier ID (DVB-CID) and NIT table CID (default)
- Market leading RF purity and performance
- PRBS generator for link performance tests
Remote in-band management
Remote over-the-air software upgrade
Optional 4 x MPE encapsulators / decapsulators up to 70 Mbps
Optional AES encryption / decryption up to 140 Mbps
Optional BISS scrambler/descrambler up to 130 Mbps
Optional DVB-S2X Channel Bonding modulator up to 425 Mbps

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Highly Flexible and Scalable
The Newtec XIF Hub is the solution for gateway deployments serving a multitude of beams, transponders or satellites. The use of a baseband matrix brings N:M redundancy for up 32 multicarrier modulators and/or demodulators in one rack. In addition, the matrix fan in/out capabilities allows to simplify interfacing with the gateway RF infrastructure. Capacity can be extended easily and rapidly, simply by adding additional multicarrier modulators, demodulators and blade servers and activation in the Newtec Dialog Network Management System. High capacity multicarrier modulator units support DVB-S2X carriers, whereas the high capacity multicarrier demodulator units can support SCPC, MF-TDMA and Newtec’s patented Mx-DMA return link technology.

High Throughput
The Newtec XIF Hub is designed for operators seeking high throughput through its 10 Gbps Ethernet switching infrastructure. With support for Forward DVB-S2X carriers up to 500Mbaud, they can leverage the high bandwidth transponders provided by HTS satellites.

Key features:
Highly flexible and scalable hub architecture
Optimized baseband density & flexibility with baseband matrix
Up to 500 Mbaud forward carriers
Carrier grade reliability with built-in redundancy
Support for SCPC, MF-TDMA and Mx-DMA® return links
Pay-as-you-grow

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Universal and highly scalable
Hosting up-to 4 satellite networks in a single rack, the Newtec HUB6504 is the solution for satellite service providers. It enables any network configuration, from a single to multiple service areas, one or more satellites, different frequency bands, multiple transponders and High Throughput Satellites.

The modularity gives service providers agility to respond to their customer and market needs in a fast and cost effective way. Additional satellite networks can be added easily and rapidly. It only requires adding additional modulators, multicarrier demodulators and server blades into the preconfigured rack slots and activation in the Newtec Dialog Network Management System. High capacity multicarrier demodulator units can be added in function of the required capacity for SCPC, MF-TDMA and Newtec’s patented Mx-DMA return link technology.

Key features
Up to 4 satellite networks
Up to 60.000 terminals
Up to 800Mbps of satellite capacity, including all traffic processing
Support for SCPC, MF-TDMA and Mx-DMA® return links
Carrier grade reliability with built-in redundancy
Low initial cost, pay as you grow
60.000 terminals, 800Mbps satellite traffic, Carrier grade
The Hub Module can process up-to 60.000 terminals and 800 Mbps of satellite capacity. It includes all traffic processing, like Quality of Service and congestion management, acceleration, compression and encryption. The Hub Module easily integrates with the ‘IP backbone’ router and the RF gateway up/downlink. Built-in redundancy provides better than 99.99% platform availability.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Global audiences today demand access to everything from corporate events to esports tournaments, so getting content to any location without delay or compromise to quality is critical. We are trusted by the biggest names in the enterprise and media world to ensure their stakeholders receive first-class content every time.

Whether for regular daily or weekly feeds or ad-hoc events, The Switch can aggregate content from satellite feeds with unlimited downlinks to our network from satellites with footprints covering Los Angeles, London and Singapore.

Connect » Provide Connectivity » Connectivity & Bandwidth » Satellite connectivity »

Founded in 1976 by the 21 member-states of the Arab League, Arabsat has been serving the growing needs of the Arab world for over 40 years, operating from its headquarter in Riyadh-KSA and two Satellite control stations in Riyadh and Tunis.

Now one of the world’s top satellite operators and by far the leading satellite services provider in the Arab world, it carries over 500 TV channels, 200 radio stations, pay-tv networks and wide variety of HD channels reaching tens of millions of homes in more than 80 countries across the Middle East, Africa and Europe—including an audience of over 170 million viewers in the Middle East and North Africa (MENA) region alone tuned into Arabsat’s video “hotspot” at 26°E. Operating a growing fleet of owned satellites at the 20°E, 26°E, 30.5°E and 39°E, ARABSAT is the only satellite operator in the MENA region offering the full spectrum of Broadcast, Telecommunications and Broadband services. This capacity will continue to expand with the launching of new satellites, making ARABSAT satellites’ fleet the youngest in the region. Arabsat also maintains strategic partnerships with most of the world's leading satellite companies and VAS integrators and with the acquisition of Hellas Sat, one of the leading telecom groups in southeastern Europe, These partnerships and acquisitions continue to expand Arabsat's reach with new orbital slots and frequency rights, allowing customers to reach farther than ever and deliver content and state-of-the-art solutions to any end-viewers audience or business partner around the world.

Connect » Provide Connectivity » Access Connectivity » ENG, SNG and flyaways »

Designed from the ground up to address the distinct needs of your industry, the network is built on dedicated high-capacity fibre with a streamlined topology and robust media nodes to deliver peak performance and reliability. The core network has in-built redundancy for real time video, while hitless mode comes as standard helping ensure high availability through two geographically diverse paths throughout the core. You can also enhance ‘last mile’ resilience through upgraded on-site equipment and dual fibre paths to the media node. The solution has been configured to more easily adapt to your changing needs. Increase or move sites, add and change features in a standardised and streamlined way with full support from our team of experts. For simplicity, on-site equipment is fully managed and ready to go with your choice of connectivity options.

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

The Telstra Global Media Network is a video contribution and distribution platform that supports permanent and occasional use services on a consumption-based business model and offers point-to-point and point-to-multipoint connectivity across fibre, satellite, internet, data and partnership networks.

The Telstra Global Media Network is a purpose-built video contribution and distribution network integrating underlying media fibre networks, satellite capabilities, and partnerships, connecting 2500+ OnNet endpoint, including 1000+ customer sites and more than 1500 venues and stadiums. The addition of a new secure cloud gateway to and from the network will allow high-quality video transport to and from markets with little to no infrastructure, as well as incident prone areas.

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

Telstra has advanced its networks to meet next generation linear demands. Customising and scaling its global media and telco network assets to connect global content owners with platform providers and media hubs to deliver permanent and occasional use content in new markets. Backed by broadcast experts in Master Control Rooms and Broadcast Operation Centres across the globe networks such as fibre, satellite, internet, are managed and monitored to meet SLA requirements, as well as advanced to incorporate future networks.

Platforms

• Customise hybrid networks to meet future possibilities
  
  
  
  • Telstra Global Media Network
    
    
    
    • Confidently deliver content point-to-point and point-to-multipoint up to 2500+ on-net global endpoints via owned and partnered networks, 1000+ customer sites and 1500+ venues and stadiums across the globe
    
    
    
    
  
  
  • GMN Express
    
    
    
    • Access content on a secure gateway from on-net media rights holders to off-net media buyers by transporting high-quality linear video using cloud infrastructure in a via contented networks with varied levels of content management and quality assurance
    
    
    
    
  
  
  • Media Satellite Networks
    
    
    
    • Transport content anywhere in the world through satellite partnerships and Telstra owned and operated teleports strategically positioned to access geostationary satellites (35,000 kms above earth) that reach the entire earth's surface
    
    
    
    
  
  
  • Telecommunications Network
    
    
    
    • Deliver convergent operations smoothly with proven resiliency and true end-to-end network diversity with no single point of failure via self-healing long-haul fibre networks ensuring fast protection in case of emergencies.
    
    
    
    
  
  
  
  

Features and Benefits

• Design a network with the best features to meet business needs
  
  
  
  • Tiered SLA
    
    
    
    • Scale up and down service assurance and management to meet media buyer's Service Level Agreements
    
    
    
    
  
  
  • Advancing networks
    
    
    
    • Our network technology continuously advances and new partners join the Telstra Global Media Network Partner Alliance to extend reach
    
    
    
    
  
  
  • Premium support
    
    
    
    • Around the clock, Level 1 support from broadcast engineers in global Master Control Rooms and Broadcast Operations Centres
    
    
    
    
  
  
  • Minimised vendors
    
    
    
    • End-to-end service from quote, through provisions to billing
    
    
    
    
  
  
  • Co-location
    
    
    
    • Host your content in our secure data centres to cross-connect with other hosted providers
    
    
    
    
  
  
  
  

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

When news and sport need to reach audiences across the world, trust a 24/7 occasional use service to deliver your content on time. Telstra Broadcast Services' Occasional Use has dedicated teams of broadcast specialists who work closely with you to schedule, scope, manage and ensure delivery of your occasional use content, all with 24/7 support. Delivering over 20,000 ad hoc event booking annually, media companies trust out network blend for delivery.

Ideal for producers, broadcasters, and operational teams who book directly with the 24/7 Telstra Broadcast Services Bookings Team and know exactly what they want and when they want. The process is simple to use and very flexible in dealing with last minute needs.

Features

• 24/7 Broadcast Operations
  
  
  
  • Occasional Use bookings are managed in Telstra's own and trusted partners' Broadcast Operations Centres and Master Control Rooms in Asia Pacific, Americas and Europe
  
  
  
  


• Dedicated Bookings Team
  
  
  
  • Ensuring your content is delivered cost effectively from the source to destination using industry standard booking systems
  
  
  
  


• Quickest delivery path
  
  
  
  • Deliver content using the best path to meet timely demands
  
  
  
  

 

Connect » Provide Connectivity » Connectivity & Bandwidth » Fiber and private IP connectivity »

From Grand Slams to World Cups, to international events that happen every 4 years, major events and tours showcase the world's best athletes competing for personal and team achievement along with the love of the sporting fans.

To deliver a top tier major event, a company must have the right blend of resources that are global, flexible, customisable, readily available, and reliable.

Telstra Broadcast Services' Major Events and Tours managed service offering delivers end to end broadcast media and carriage operation customised with telecommunications, Live OTT, Broadcast and Media services to ensure a timely and premium experience that is sure to be a home run!

Features and Benefits

• 100GBps Media backbone
  
  
  
  • Bandwidths up to 100Gbps can simultaneously deliver up to 8 uncompressed ultra-high definition (UHD) 4k video feeds (12Gbps average)
  
  
  
  


• Customisable network with reach
  
  
  
  • Telstra owns and has vested interest in one of the largest subsea fibre networks - 400,000 kms - throughout the Pacific, Indian and Atlantic Oceans
  
  
  
  


• True convergent expertise and solutions
  
  
  
  • Build on Telstra's telco broadcast and internet capabilities to craft viable and economic solutions, including true remote production
  
  
  
  


• Global Field and Broadcast Operations
  
  
  
  • Broadcast experts on the ground, in Master Control Rooms and Broadcast Operation Centres across the globe to manage and monitor delivery to meet SLAs
  
  
  
  


• Access into China and throughout Asia
  
  
  
  • Telstra is the first foreign company licensed to provide connectivity and network services onto mainland China with POPs for media delivery
  
  
  
  

Solutions

• Hybrid Media
  
  
  
  • Allow our experts to curate a solution accessing Telstra's full media network suite, including fibre, satellite, IP, and cloud connectivity
  
  
  
  


• International Remote Production
  
  
  
  • Produce multiple global events simultaneously by delivering content up to 100GBps from source via a high-speed network to centralised locations
  
  
  
  


• Satellite Only
  
  
  
  • Choose a satellite network with strategically placed teleports in Asia Pacific and partnership that can access the entire earth surface
  
  
  
  


• Telecommunications Network
  
  
  
  • Seamlessly integrate between a full range of telecommunication, video, internet and data services bundled together