Arri Skypanel S360 C - IABM Single BaM Product

• CCT Mode:  Create the perfect soft white light with color-accurate, full spectrum true daylight and tungsten output.


• HSI Mode:  Be bold with color with instant hue, saturation and intensity control to create any color in the 360° color wheel and at any intensity from 0-100%.


• Effects Mode:  Create dazzling lighting effects such as fire, lightning, emergency services or paparazzi with full creative control.


• Gel Mode:  Replicate the industry’s most popular gel sets with a daylight or tungsten source at the touch or a button for quick scene changes.

Canara Lighting has launched LED JEET Series. It is possible to replace old technology fixtures by LED. There are different models from 1000W to 60W. For example, 1000W Jeet replaces 4000W light. Colour temperature 3200K or 5600K.

Main features include 75% power saving; no radiated heat; used as soft and hard light; five times brighter than traditional light; less weight and operator friendly; no external ballast required; environmental friendly; no UV, IR or mercury; suitable for both indoor and outdoor applications. CE certified. It is supplied with carrycase for easy and damage-free transportation.

An innovative choice for cinematographers and DOP’s.

Canara Lighting has launched 200W CCT tunable LED Fresnel. It is possible to tune colour temperature from 2700K to 6500K. LUX level at 2 m from 28,900 to 31,000. CRI is above 95, TLCI is above 95. It can be controlled through manual and DMX 512 control. Silent operation, fan noise less than 20dB. Available in both manual and pole operated yoke. 0 to 100% flicker free dimming. This LED fixture is most suitable for the modern television studios.

Canara Lighting has launched LED JEET Series. It is possible to replace old technology fixtures by LED. Models are 1000W and 300W. 1000W Jeet replaces 4000W HMI light and 3o0W JEET replaces 1200W HMI light. Colour temperature 3200K or 5600K.

Main features include 75% power saving; no radiated heat; used as soft and hard light; five times brighter than traditional light; less weight and operator friendly; no external ballast required; environmental friendly; no UV, IR or mercury; suitable for both indoor and outdoor applications. CE certified. It is supplied with carrycase for easy and damage-free transportation.

An innovative choice for cinematographers and DOP’s.

Proper lighting has the potential to focus attention, to create atmosphere, to support and facilitate the basic working processes.  A work station, with its monitors and display terminals whether is a TV production, post production or OB, demands well designed lighting.  Lighting that illuminates the working area and clearly shows what needs to be seen while avoiding obtrusive glare and disturbing reflections in the monitor screens.

Direct spot lighting contributes to tiredness, eye-strain and declining efficiency. The heat and power consumption are factors often overlooked. Maintenance is important.  Lighting components should be easily accessed without the need of tools.

PTS control lights  have been designed to meet all these requirements.  Lighting conditions can be matched to the of each individual site by individually  adjusting the optimum combination of beam angle and width by means of shutters.  In fact, these luminaires cut off the light so precisely that, when viewed from outside the beam angle, actually appear dark to the viewer.  Available in 650mm and 1250mm.  Fitted with electronic starter for longer tube life and instant start and wide spectrum 6500K tube.  Electrostatically black painted.

The bantam fixture has a white light range of 2000 to 10,000K to blend in seamlessly in any ambient light situation, match other fixtures, or exercise creative expression. The light's high CRI/TLCI rating of 95/96 is a testament to its advanced accuracy in color reproduction. Another color control feature is its RGB mode with hue, saturation, and intensity adjustment that gives image makers access to millions of colors. And the light is dimmable from 0 to 100%.

MORE PRACTICAL

The Accent B7c is a battery-operated 7W RGBWW color-mixing LED light bulb, and the first product in Aputure’s Accent family of “practical” LED lights built for filmmakers, with a unique combination of features no other light has. Buy Aputure B7c from UBMS Dubai . We have stock for B7c.

YOUR FAVORITE LAMP

The B7c features a standard E26/27 lamp socket screw connector making it compatible with a wide variety of lamps anywhere in the world. Its light bulb form factor allows users to more naturally integrate programmable, color-mixing, practical lighting into any scene. Buy Aputure Bulb from UBMS Dubai Showrrom or order online .

MATCH ANY LIGHT

The Accent B7c matches the color temperature range of the Nova P300c, Aputure’s most advanced color mixing light, producing a wide color temperature range of 2,000K-10,000K. And when combined with Sidus Link’s SourceMatch feature, it can match nearly any white light source.

PRISTINE QUALITY YOU CAN TRUST

Unlike typical household LED bulbs, the Accent B7c uses cinema-grade LEDs to reproduce immaculate skin tones -- with impeccable CRI and TLCI values of 95+, and a tungsten SSI score of 85, outpacing industry-standard lights.

COLOR TUNABILITY

Utilizing Aputure’s unique RGBWW LED configuration, the B7c bulb is able to produce over 90% of the saturated colors in the Rec.2020 color space, putting it on par with industry-standard lighting instruments.

FLICKER-FREE FILMMAKING

The Accent B7c like all Aputure products is made with filmmakers in mind. Unlike consumer LED smart bulbs, the B7c features 20KHz stepless dimming that remains completely flicker-free up to at least 1,000fps with no color shift.

BUILT-IN BATTERY

The B7c is also the first bulb designed for filmmakers to have a built-in battery, powering the B7c for over 70 minutes at full power, and over 20 hours as it approaches minimum brightness.

AC/DC MODE

The B7c’s unique internal battery allows the B7c to have multiple power supply modes: AC & Battery (DC). In AC power mode the B7c retains its last settings and turns on and off like a traditional light bulb, allowing for natural interactions with actors.

PREMIUM CONSTRUCTION

Using an aluminum metal structure and a unique toroidal diffusion design, the B7c spreads lights evenly while also maintaining absolute stealth on-camera.

ON-BOARD CONTROLS

The Accent B7c is the only LED smart bulb to feature on-board buttons for both brightness and CCT control, allowing users to adjust intensity and CCT presets in a few simple clicks, without even connecting it to the Sidus Link app.

SIDUS LINK

Using built-in Sidus Mesh technology, the B7c can also be controlled wirelessly via a smartphone or iPad using the Sidus Link app, allowing filmmakers to fine-tune CCT, brightness, color, and FX, as well as use SourceMatch and ColorPicker modes to match nearly any color.

SIDUSPRO FX

Through Sidus Link, the Accent B7c has access to built-in lighting FX, as well as SidusProTM FX such as PickerFX, Manual FX, and Magic Program, producing an ecosystem that allows creatives to design a myriad of unique programmable FX.

CHARGING CASE

The Accent B7c is also [soon to be] available in an 8-Light Charging Kit, made for indie-filmmakers, owner-operators, and rental houses, featuring a durable hard shell case with the capacity to store, protect, and simultaneously charge up to eight B7c bulbs.

Benefits

• 7W RGBWW LED smart bulb


• Standard E26/E27 light bulb socket


• Built-in lithium polymer battery (70+ minutes at max)


• Fully tunable CCT from 2000 to 10,000K


• Average CRI 95+; TLCI 96+


• SSI (Tungsten): 85; SSI (D55): 74


• RGB color tunability with hue, saturation, and intensity adjustability


• Covers >90% of the colors within Rec.2020 color space


• Stepless dimming from 0 to 100% with no color shift


• Nine built-in lighting effects: Paparazzi, Fireworks, Faulty Bulb, Lightning, TV, Party, Pulsing, Cop Car, and Fire


• Smart bulb with onboard button controls


• Sidus Link app compatible; firmware upgradeable


• Wireless Bluetooth control up to 164'


• Two power supply modes: Standard/AC and Battery/DC


• Passively cooled aluminum alloy heatsink

In combination with the Protech HDF viewfinder,the return video confirmation function is very convenient for multi-camera recording.This function can be realized without relying on the functions of the camera body.For example, even in one-man multi-camera recording with two professional camcorders,you can operate the other camera while checking and controlling the fixed-point camera image. It becomes possible to do.

The M18 is an 1,800 W open face lamphead, combining the Academy Scientific and Engineering Award-winning lens-less optical technology of the ARRIMAX with the innovative True Blue design. The result is an extremely powerful lamphead, as small as a 1,200W PAR but with a 70 % higher light output. The M-Series M18 fixture is adjustable from 20° to 60° without requiring spreader lenses.

Features:

• Lens-less MAX Technology: Easy to use


• New 1800 W lamp


• Virtually the same size as a 1200 W lamphead but more than 70 % brighter


• Runs from most domestic sockets world-wide


• Uses existing 575/1200/1800 W cables


• Can also be used with 1200 W lamps and ballasts


• Cross Cooling allows safe operation at any tilt angle


• Protection class IP 23


• TRUE BLUE tilt lock holds even heavy Chimeras


• Easy maintenance

A member of the ARRI M-Series, the M40 is a lens-less system that unifies the advantages of Fresnel and PAR fixtures. The unit is open face and thus very bright: around 30 % brighter than an AS40 in spot. Due to its unique, patented MAX Technology reflector, it is also focussable over a range of 18 to 52° Half Peak Angle. The M40 gives a remarkably even beam spread that casts crisp shadows over the whole focus range. The reflector characteristics is optimised for 4,000 W lamps, but can also be used with 2,500 W lamps.

The lamphead is equipped with a CCL module (Compensation of Cable Losses). When operated with the ARRI EB 2.5/4 kW High Speed AutoScan with CCL, full power is maintained all the way to the lamp even when very long cables are used. This means uniformly high light output indepent from cable length.

Key Features:

• Lens-less MAX Technology: Easy to use


• Around 30 % brighter than AS 40


• Compensation for Cable Losses (CCL)


• Tubular steel yoke


• Two disk brakes with steel handles


• Cross-Cooling allows safe operation at extreme tilt angles


• Suitable for high frame rate images


• IP Rating IP23

The Arri L5 / LoCaster LED Kit I features three lights and accessories for a multiple-light shoot. This includes a LoCaster A2 LED panels with a two-leaf barndoor, filter frame, stirrup, 10' extension cable, power supply, and baby pin with 3/8" threaded stud as well as two L5-C Color Controllable 5" LED Fresnels each with a four-leaf barndoor and filter frame. Other accessories include three AS-01 light stands, a ceiling scissor clamp, and a heavy duty case.

Key Features

• LoCaster A2 LED Panel


• Two-Leaf Barndoor & Filter Frame


• Stirrup & 10' Extension Cable


• Power Supply


• Baby Pin with 3/8" Threaded Stud


• Two L5-C 5" LED Fresnels


• Two Four-Leaf Barndoors & Filter Frames


• Three AS-01 Stands


• Ceiling Scissor Clamp


• Heavy Duty Case

LoCaster LED Panel (35W/11-36V)The ARRI CASTER Series offers an LED array with a unique optical design which yields high output combined with outstanding control options at an affordable price.

This Arri LoCaster LED Panel is designed for location use in video, film or TV production scenarios. Dimming function (0-100%) and color temperature control from 2800-6500K can be controlled independently with simple knobs on the body of the LED panel itself.

A 3/8" (9.5 mm) female thread permits mounting the luminaire to grip equipment such as the Arri Caster Stirrup which provides swiveling movement and a 5/8" (16mm) receiver in a yoke-like construction. Safety features include Auto Power Off to protect LEDs from heat due to overvoltage. Accessories include a 2-leaf barndoor, gel frame and a light intensifier that doubles the luminous output of the panel.

The LoCaster Power Supply (sold separately) accepts input voltages from 100-240VAC, 50/60Hz and outputs 24VDC. Extremely small and lightweight, it powers a single LoCaster panel. An optional NiMH Battery Pack is also available, providing 2 hours of DC power for a single LoCaster panel.

• Tunable white light from tungsten to daylight from 2800K-6500K.


• CRI (Color Rendering Index) of 90 renders colors more vivid on film or digital media.


• Absolute color temperature and intensity stability due to Arri True Match LED Technology.


• 0-100% dimming as well as color temperature is controllable on the panel via simple knobs.


• Small size (8.7 x 3.75 x 2.75") and light weight (2.11 lbs) make for easy portability and handling.

Stirrup for LED BroadCaster/LoCaster/BatteryThe Arri Stirrup provides a convenient mount for both BroadCaster and LoCaster LED Panels as well as the LoCaster Battery Pack.

The panels, which mount to the stirrup via their 3/8" (9.5 mm) female thread, gain the advantage of swiveling movement and a 5/8" (16mm) receiver in a yoke-like construction for stand mounting.

T-pins are built into the stirrup which snap into channels in the NiMH Battery Pack for quick mounting. The battery is released by pulling the knob on top of it.

2 Leaf Barndoor for LoCaster/BroadCasterThis is the Arri 2 Leaf Barndoor for the LoCaster/BroadCaster lights.These lights are part of the LED Caster Series offers continuous dimming, choice of color temperature and superior digital rendition.. LoCaster the location model while the BroadCaster is designed for more control is in-studio.

Gel Frame for LoCaster and BroadCasterThe ARRI Gel Frame for LoCaster and BroadCaster allows use of cut-to-size filters with these LED fixtures. The frame is not inserted into the flute in the fixture's housing. It can only be used in combination with either the 2-leaf barndoor or the intensifier. It snaps into place in the space between the LED panel and either of these accessories.

Power Supply for LoCaster (100-240V)The Arri LoCaster Power Supply accepts input voltages from 100-240VAC, 50/60Hz and outputs 24VDC, with a maximum of 2.5A. Extremely small and lightweight, it powers a single LoCaster panel via a 4-pin connection.

• AC power supply accepts 100-240VAC input and powers a single LoCaster head.


• Weighs only 0.6 lbs (0.3 kg) and is only 4.7" (12 cm) long.

PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10')This ARRI PowerDMX Extension Cable XLR 4-Pin for BroadCaster (10') allows remote control of the ARRI BroadCaster 50W dimmable LED light panel, including independent control of intensity, color temperature and +/- green attributes. This cable is 10' (3 m) long.

• Designed for the ARRI BroadCaster LED Light Panel

Baby Pin (5/8") with 3/8" Thread for LoCasterThis Baby Pin (5/8") with 3/8" Thread for LoCaster is a 5/8" (16 mm) male stud adapter with 3/8" thread for using the LoCaster LED light with telescoping hangers.

L5-C 5" LED Fresnel (Silver/Blue, Stand Mount)ARRI continues to expand its L-Series with the introduction of the L5-C 5" LED Fresnel The key characteristic of any Fresnel is flood to spot capability and the L5-C offers an impressive beam angle adjustment of 14-50°.The 100-0% dimmable L5-C is a "fully tunable" white light source, allowing you to match existing fixtures with color temperatures from 2,800K to 10,000K. The on-board controller allows full minus green to plus green adjustment as well as RGB+W color gamut color mixing with hue and saturation control, enabling matching of specific shades and skin tones. All functions can be controlled via DMX, an ideal feature for broadcast studios, while RDM permits monitoring of the light's status.The L5-C produces the equivalent of a 450W tungsten light while drawing only 115W for a savings of up to 75% over traditional fixtures. And low draw and heat means lower HVAC costs in the studio and a quick return on investment. You can run about fifteen L5-Cs from a 20A, 120V outlet as opposed to three or four 500W tungsten fixtures. Power options include the L5-C's 90 - 250 VAC on-board power supply or 22-36 VDC battery options. This version of the L5-C has a silver/blue finish.

       Variable Beam Angle: 14 to 50 DegreeA key element of the versatility of traditional Fresnels is the ability to spot and flood the beam as needed. Whether it's a flood field for a pullback shot or a tight spot for a bright highlight, the continuous focus-ability of the L-Series performs lives up to your expectations. And, unlike traditional Fresnels, which have significant light waste in spot focus, the efficient L-Series optical system maintains the same field lumens in all focus positions.

      True Fresnel Lens Light CharacteristicsWhether shaping the beam to isolate talent and set elements or cutting the field to eliminate spill light, controllability is crucial to lighting. L-Series Fresnels provide the same ability to cut and shape with barndoors and flags that we have come to expect from conventional Fresnels.

      Even Light FieldClear, defined shadows traditionally have been solely a trait of single source tungsten and daylight fixtures. ARRI L-Series Fresnels provide the same single shadow properties lighting designers expect, delivering natural results.

      Vibrant, Full-spectrum LightingWith the L5-C, fully tunable white light can be adjusted for different skin tones, camera sensors and mixed-light environments, while specific color shades can be matched through full gamut color mixing. Unlike other LED fixtures, this level of color control does not involve compromising the quality of the light field. The L-Series is unique in combining uniform light and single shadow rendition with full control of color attributes.

      Focus KnobsTrue Blue-style focus knobs provide the precise adjustment and rapid flood-to-spot that users enjoy from manual, mechanical control. Knobs on both sides of the fixture ensure easy access from all positions, eliminating the need for awkward reaching around the fixture. Full flood-to-spot can be achieved in only three turns.

      Sliding StirrupsThe ARRI sliding stirrup design enables precise adjustment of the fixture's center of gravity, to compensate for front-end accessories. It also gives the option of pulling the fixture back and reducing its hanging height.

       Tilt-LockThe strong tilt-lock provides extremely secure locking, eliminating movement and slippage and ensuring that the fixtures will stay where you put them.

       DMX ControlFor broadcast studios, remote fixture control is of paramount importance, and all functions of the L5-C are controllable through DMX. The L5-C is also RDM compatible, providing bi-directional feedback and reporting of system status, hours on the light engine, calibration data from the internal color sensor and current DMX address with the ability to remotely assign and address all fixtures in a DMX network.

       On-board ControlThe on-board controller has manual intensity adjustment and additional controls for color temperature as well as plus/minus green to adjust hue and saturation at the touch of a button.

        Energy SavingsL-Series fixtures reduce electricity usage by 75% and their LED light engines last 200 times longer than normal bulbs, when compared to conventional tungsten Fresnels. These and other cost-saving attributes will combine to affect a rapid return on your investment.

        Location ApplicationsLighting teams working on location will love the versatility they can achieve in small to medium-size packages. Several ARRI L5 Fresnels can be run off a single 20A, 120V outlet, as opposed to only two or three 500W tungsten Fresnels.       Upgradeable TechnologyThe L5-C is an expandable platform designed to adapt with the latest enhancements in LED chip performance. The firmware is upgradeable through the USB port on the rear of each unit, accommodating future control protocols such as ACN and incorporating other system enhancements that may become available in due course. 4 Leaf Barndoor Set for 650W Fresnel, 200W HMI, 400W Pocket PARThis is an Arri Four Leaf Barndoor Set for the 650W Fresnel, 200W HMI, 400W Pocket PAR & Pocket Lite. Barndoors attach to the front of a light and are used to restrict light from areas of a set. They have either four or eight leaves that can be adjusted. Arri barndoors are heat resistant and rotatable.

Filter Frame for 650W Fresnel, 200W HMI FresnelArri Filter Frames are circular and heat resistant. Filters can be cut and sandwiched into them, and they slide into lamphead accessory holders. Sizes are a little bit larger than the fresnels.

AS-01 Lightweight Light Stand 8.5'The 8.5' ARRI Lightweight Light Stand is designed to hold small light fixtures like the ARRI Fresnel 150. It packs easily for location work.Three riser sections.

Ceiling Scissor Clamp with 5/8" StudThis scissor clamp is for mounting small light fixtures from a drop ceiling frame. It features a standard 5/8" (baby) mounting stud.

Heavy Duty Case for ArrisoftThis is a hard shell, aluminum reinforced case designed to hold the Arrisoft 1000 Head, or any other light head with dimensions of 5.5 x 13 x 12.5 inches or less. A section is provided for storage of cables.

ARRI L5 / LoCaster LED Kit I

The Arri L5 / LoCaster LED Kit I features three lights and accessories for a multiple-light shoot. This includes two LoCaster 2 Plus LED panels each with a two-leaf barndoor, filter frame, stirrup, 10' extension cable, power supply, and baby pin with 3/8" threaded stud as well as an L5-C Color Controllable 5" LED Fresnel with a four-leaf barndoor and filter frame. Other accessories include three AS-01 light stands, a ceiling scissor clamp, and a heavy duty case.

The L5-TT Pole Operated (Blue/Silver) tungsten tuneable allows for fine-tuning of the tungsten color temperature from 2,600 K to 3,600 K with increased brightness over the L7-C, and is particularly suited to applications requiring precise matching to conventional tungsten lampheads. Available in both Hybrid and Active Cooling.

The ARRI L-Series is an LED Fresnel fixture which is so close to its conventional counterpart in function and performance that it creates a previously unattainable opportunity, like-for-like replacement of traditional Fresnels with LED-based units. The L5 serries compact size and low weight allow the L5 to be rigged in tight places and hung from low ceilings. The L5 is also ideal for cramped location shoots and interview setups. Low heat allows safer and more comfortable shooting conditions.

The L5 is approximately 45% brighter than a 300 watt tungsten Fresnel, but only consumes 115 watts. When compared to the L7, the L5 is half the weight and size.

POLE-OPERATED

versions include the following base configuration: Pole Operation for Pan, Tilt and Focus, 16 mm / 28 mm Combo Pin (Baby 5/8 inch / Junior 1-1/8 inch Combo Pin), 1.5 m (5 ft) Cable with Bare Ends, Integrated 5-Pin DMX In and Thru.

Key Features:

· Fully Tuneable from 2,600 K - 3,600 K

· Plus/Minusgreen correction

· More than 25% brighter than L5-C at 3,200 K

· Perfect for color matching to conventional tungsten lamps

· High Color Rendering

· Low Power Consumption (115 W Nominal)

· Fully Dimmable

· Lightweight and Compact

· True Fresnel Lens Light Characteristics

· On-Board Battery Connection (22 - 36V DC)

· Onboard DMX In and Out

· RDM Implementation

· USB Mini Connection for Firmware Updates

· Available in Blue/Silver and Black

· Fan Mode Selection

· powerCON TRUE1 Power Connector

Note: Barndoors are not included with L5 and have to be ordered separately.

L5 LED Kit III (Schuko)

The best kit for your application depends on your production needs and artistic preferences. Ideally the kit should offer flexibility to work in many different situations. You'll want to consider fixture types, total wattage and the size and weight of the kit. The first step is to determine what light source best suits your needs. ARRI LED kits offer versatile and durable solutions for mobile, low energy lighting. The ARRI L5 Kit III contains two of ARRI’s L5 LED Fresnels, which allow color tuneability and excellent beam quality.

• ARRI Lighting kit


• Offer flexibility to work in many different situations


• L5 Kit III with Schuko Connector


• 2 x L5-C


• 2 x Mains cable, 3m, powerCON TRUE1/Schuko, with line switch


• 2 x 4-leaf barndoor (168mm/6.6")


• 2 x Filter Frame (168mm/6.6")


• 2 x Compact ARRI Kit Stand LS.01 (050MKA)


• 1 x Heavy Duty Case L5/Caster Kit


• L5 Kit III with Edison Connector/US Version


• 2 x L5-C


• 2 x Mains cable, 7m, powerCON TRUE1/Edison, with line switch


• 2 x 4-leaf barndoor (168mm/6.6")


• 2 x Filter Frame (168mm/6.6")


• 2 x Compact ARRI Kit Stand AS-01


• 1 x Heavy Duty Case L5/Caster Kit

ARRI blue/silver SkyPanel S30-C LED Softlight  supported by a manual aluminum yoke, the panel's surface area measures 14 x 11.8", making it an ideal portable, on-the-go light source for mobile applications. Output is controlled via interchangeable thermoplastic diffusers that range from Standard to Lite to Heavy to soften the light and wrap its output around your subject and the SkyPanel S30-C outputs the equivalent of a 1,000W tungsten soft light while drawing a maximum of only 240W.

S30-C, Manual, Blue/Silver, 3m DC Cable, Schuko powerCON.

Key Features:

• Fully Tuneable from 2,800 K - 10,000 K


• Plus/Minusgreen correction


• Vibrant Color Selection (RGB+W Color Gamut)


• Hue and Saturation Control


• High Color Rendering


• Low Power Consumption (200 W Nominal)


• Tremendous Output - Brighter than 1kW Tungsten Soft Light


• Fully Dimmable from 0 - 100%


• Lightweight and Compact


• Beautiful Soft Beam of Light


• Interchangeable Diffusion Panels


• Wide Range of Accessories Available


• Thin Profile


• On-Board Battery Connection (23 - 36V DC)


• Onboard Simple Control Panel


• Onboard DMX In and Out


• RDM Implementation


• USB-A Connection for Firmware Updates


• EtherCon port for network connectivity


• Available in Blue/Silver and Black


• Fan Mode Selection


• External Lightweight PSU


• powerCON TRUE1 Power Connector

ARRI continues to literally broaden their LED line with the introduction of the wide-format SkyPanel S120-C LED Softlight. Supported by an aluminum yoke, the panel surface area measures 50.8 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. A Standard medium diffuser is included with the light. The SkyPanel outputs the approximate equivalent of a 2000W tungsten soft light while drawing a maximum of only 430W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S120-C is fully color tuneable, allowing output of a warm 2800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full minusgreen to full plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your chosen color in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or an LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.

The SkyPanel S120-C can be used worldwide, thanks to its included 100-240 VAC power supply, but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a Center Mount Yoke and comes with an Edison power cord.

ARRI continues to broaden their LED line and reaffirm their commitment to accurate color rendering with the introduction of the SkyPanel S60-C LED Softlight. Supported by a steel yoke, the panel surface area measures 25.4 x 11.8" and employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. The SkyPort outputs the equivalent of a 2,000W tungsten soft light while drawing a maximum of only 450W.

Using technology originally designed for the L7-C Fresnel, the SkyPanel S60-C is fully color "tuneable" allowing output of a warm 2,800K to icy blue 10,000K light and also uses the full RGB+W color gamut with hue and saturation control for fine adjustments. Full Minusgreen to Full Plusgreen is also possible, so if you're lighting for blue or greenscreen, you can simply dial your color chosen in. This wide degree of control is responsible for a very high CRI of 95 and a rating of 90 with the newer TLCI standard. All of these functions as well as 0-100% dimming can be adjusted locally with the SkyPanel's onboard controller or remotely via DMX or a LAN. Besides inputs and outputs appropriate to these functions, the light also has a USB-A port for downloading firmware upgrades from a thumb drive, PC or Mac.

The SkyPanel S60-C can be used worldwide, thanks to its included 90-250 VAC power supply but it can also use optional 23-36 VDC batteries when mains power is unavailable. Besides the power supply, the light comes with a Junior (1-1/8") pin and a standard diffuser. This version of the light has a manual yoke and comes with an Edison power cord.

Fully Tuneable, Precise Color Rendering

Incorporating features of ARRI's successful L-Series LED Fresnels, the SkyPanel is one of the most versatile soft lights on the market, as well as one of the brightest. Like the L-Series, SkyPanel "C" (Color) versions are fully tuneable, meaning that correlated color temperature is adjustable between 2,800K and 10,000K, with accurate color rendition over the entire range. Full plus and minus green correction can be achieved with the simple turn of a knob, and in addition to CCT control, vivid color selection and saturation adjustment is also possible. Applications for this controllability range from quickly adjusting the CCT to set the mood of a scene, to selecting the chroma green output for green screen color keying. Each LED light engine is computer calibrated in order to ensure unit-to-unit and batch-to-batch consistency, as well as accurate color temperatures

True Soft Light Beam Quality

Soft lights are known for their smooth quality of light and even, uniform beam field. SkyPanel's combination of a precise selection of diffusion panels, LED mixing chamber and large surface area allow for the light output to wrap around objects, eliminating sharp shadows and making for an ideal beauty light. The beam field is homogeneous in both color and intensity

Natural Shadow Rendition

Mixing some 2,000 calibrated red, green, blue and white LEDs into one homogeneous beam of soft light, the SkyPanel produces not just impressive light quality, but excellent shadow rendering as well. The soft shadows cut cleanly without exhibiting multiple edges or color fringing

Versatility Built-In

While the SkyPanel was designed to be used primarily as a soft light to illuminate people, various built-in features make it extremely adaptable to other uses. The diffuser panels on the front of the lamp head are interchangeable, so going from the Heavy to the Lite diffusion panel can be done in a matter of seconds. With the onboard battery input, SkyPanel can be run off industry-standard batteries. The S60 can be operated at up to 50% of its total power on battery power The SkyPanel also makes an effective space light outputting a large downward-directed pool of color controllable soft light through an optional silk cylinder

Built to Last

Made in Germany to ARRI standards, the SkyPanel is constructed from resilient materials and assembled by hand. The combination of an aluminum core with fiberglass-reinforced thermoplastics results in a solid fixture that can withstand heavy daily use on busy film sets. The easily-serviced electronics have been designed to last beyond a minimum of 25,000, up to a maximum of 50,000 hours while the LED light engine even allows for recalibration

Highly Controllable

The SkyPanel user interface is designed for ease of use with a wide range of controls available to the user. Three simple knobs adjust the color temperature, green/magenta balance, light intensity and hue and saturation instantly. In addition to the on-board controls, all functions can be remotely adjusted via DMX or LAN network connections

ARRI continues to enlarge their LED line with the introduction of the massive SkyPanel S360-C LED Softlight. Supported by a weight-reducing carbon fiber yoke, the panel surface area measures 34.4 x 50.4". It employs interchangeable thermoplastic diffusers that range from Lite to Heavy to soften the light and wrap its output around your subject. There's also an Intensifier that boosts the output for long-throw use. A Standard medium diffuser is included with the light. The SkyPanel outputs the approximate equivalent of an 8000W tungsten soft light while drawing a maximum of only 1500W.

Key Features:

• Light Aperture: 50.4 x 34.4"


• 4kW Tungsten Softlight Equivalent


• Full Gamut RGB+W Color Control


• Color Temperature: 2800-10000K


• Hue and Saturation Control


• Beam Angle: 105°


• Built-In LumenRadio CRMX Wireless DMX


• Wired & Wireless DMX with RDM Support


• Advanced Dynamic Effects and Programming


• Universal 90-250 VAC Power Supply Unit

• Includes:


• 8x Astera FP1 Titan Tube


• 16x Eyebolts (Astera AX1-EBLT)


• 16x Aluminum Holders (Astera AX1-H)


• 16x Cotter pin


• 16x Spigots


• 8x Stand (Astera AX1-STD)


• 1 x Astera TITAN-CHRCSE Titan Tube Charging Case

The next generation of the Chroma-Q® Color One family is here: the Color One 100X™ LED PAR! This must-see luminaire features the same innovative homogenised beam as the Color One 100™, only with nearly 60% more output. The 100X's custom optical design and fully homogenised output delivers a powerful, smooth, uniform and defined 19° beam, with outstanding colour blending across the spectrum and no unsightly colour separation shadows. RGBA emitters deliver outstanding colours across the spectrum - including deep-cold blues, red-hot lava looks and super-soft pastels, as well as a complete range of whites ---all from ONE source.

Utilising core LED technology from the Chroma-Q® premium performance lighting range, the multi-purpose fixture is ideal for a wide range of applications and provides a powerful, creative lighting tool.

Key Features

• Nearly 60% brighter than its predecessor


• Fully homogenised beam


• RGBA colour-mixing palette


• Extremely uniform wash


• Defined 19° beam


• Bold saturates and subtle pastels from ONE source


• High CRI of 93


• Floor, truss or wall mountable


• Quiet, convection cooled, no fans


• Theatrical grade dimming


• Chroma-Q calibration provides exceptional fixture-to-fixture consistency

Smooth, Homogenised OpticsThe Color One's custom optical design and fully homogenised output provides a smooth, uniform and defined 19° beam, with outstanding colour blend across the spectrum and no unsightly colour separation shadows.

This makes the Color One ideal for use as a front and backlight with clean shadows, and an uplighter with a smooth, even beam - all from ONE source.

Power Across The SpectrumThe Color One's huge RGBA colour-mixing palette delivers outstanding colour blend across the spectrum - including deep-cold blues, red-hot lava looks and super-soft pastels - as well as a complete range of whites - all from ONE source.

High CRIWith RGBA colour mixing providing a high CRI of 93, the fixture can achieve extremely accurate colour matching.

Theatrical Grade DimmingTheatrical grade dimming emulates the extremely smooth dimming curve of tungsten fixtures.

Multi-Purpose Workhorse FixtureWith the advanced feature set also including convection cooling for quiet operation, a versatile mounting yoke and a choice of IP20 / IP65* models, the Color One 100™ is suitable for numerous entertainment lighting applications - complementing the popular Chroma-Q® Color Force™ and Inspire™ LED fixtures ranges.

Convenient Remote-Controlled OperationWith a simple to use Infra-Red remote control included with each fixture, you can be up and running within minutes without the requirement of a lighting console - saving time and labour with instant access to preset colours, on/off, dimming and effects.

Compatible With Industry-Standard AccessoriesTo enable maximum flexibility with users' existing production inventory, the Color One accepts industry-standard 6.25" accessories such as egg crates, barndoors, and top hats.

Chroma-Q® Studio One 100™ LED PAR is designed to deliver the highest quality of white light from an LED-based fixture, for the most demanding applications.

Utilising core LED technology from the Chroma-Q® premium performance lighting range, the multi-purpose fixture is ideal for a wide range of environments and provides a powerful, creative lighting tool.

This fixture is also available as a RGBA version.

Key Features

• Extreme white outputs


• Choice of daylight, variable, and tungsten white CCTs


• Extremely uniform wash


• Fully homogenised beam


• Superior build quality


• Defined 18° beam


• High CRI


• Camera friendly ---Flicker-free operation


• Floor, truss or wall mountable


• Convection cooled for silent running


• Theatrical grade dimming

Smooth, Homogenised OpticsThe Studio One 100™ custom optical design and fully homogenised output provides a smooth, uniform, and defined 18° beam.

Theatrical Grade DimmingTheatrical grade dimming emulates the extremely smooth dimming curve of tungsten fixtures.

Flicker-Free OperationThe Studio One 100™ offers adjustable dimming frequencies to ensure flicker-free operation on cameras.

Multi-Purpose Workhorse FixtureWith the advanced feature set also including convection cooling for silent operation and a versatile mounting yoke, the Studio One 100™ is suitable for numerous TV, film, studio, exhibition & entertainment lighting applications - complementing the popular Chroma-Q® Studio Force™ and Studio Force Phosphor™ LED fixtures ranges.

Convenient Remote-Controlled OperationWith a simple to use Infra-Red remote control included with each fixture, you can be up and running within minutes without the requirement of a lighting console - saving time and labour with instant access to pre-set colour temperatures, on/off, dimming and effects.

Compatible With Industry-Standard AccessoriesTo enable maximum flexibility with users' existing production inventory, the Studio One 100™ accepts industry-standard 6.25" accessories such as egg crates, barndoors, and top hats.

The Chroma-Q® Studio Force V 12 Phosphor™ is a 3,200 - 5,600K CCT, variable white fixture which utilises innovative LED technologies found in the Studio Force™ range to provide an equivalent soft edge output to a fluorescent fixture - up to 4,200 lumens - developed specifically for use in TV, film and broadcast studio environments. Other features include fine-tuning of the green & magenta tints and frequency for camera, an extremely smooth uniform wash, extra soft beam, theatrical grade dimming and laboratory calibration to match Black Body Locus. Designed for practicality, the unit is equipped with a manual control mode, colour touch screen interface, fanless, studio and full modes for maximum control of the units and a range of optional accessories.

Key Features

• 3,200 - 5,600K CCT variable white


• Variable frequency


• Extreme output – up to 4,200 lumens


• Extra soft beam – very wide output


• Extremely smooth, uniform wash


• Theatrical grade dimming


• Ideal for film and studio applications


• Factory calibrated to match Black Body Locus


• 335mm / 13.2" length ideal for floor, wall or truss mounting


• Camera friendly


• PowerCon input and output for easy daisy chaining of fixtures


• Broad range of accessories available, including barn door and spigot adaptor


• Fanless, studio & full control modes


• Intuitive colour touch screen interface


• Flat end plates for seamless wall-washing


• Built-in power supply


• Hidden quick release fixings


• Rugged extruded aluminium body


• Also available as a DC battery-powered version

Extreme OutputWith an extreme output of up to 4,200 lumens, the Studio Force V 12 Phosphor™ packs an impressive punch for its size.

Multi-purposeThe Studio Force V 12 Phosphor™ is specifically designed for film and studio soft lighting applications. Optional accessories include a spigot adaptor, egg crate louver, top hat, half top hat and barn door.

ColourThe Studio Force Phosphor™ range includes ColorSure™ technology for enhanced consistency across each light engine and when using multiple fixtures.

Optics & DimmingThe Studio Force Phosphor™ range's camera friendly custom optical design provides a smooth, uniform output, matched by theatrical grade dimming.

Practical & MechanicalOn the outside, the Studio Force V 12 Phosphor™ has been designed to provide maximum versatility and ease of use. The fixture features a colour touch screen interface for easy operation and a full manual control mode. The built-in power supply, hidden quick release fixings requiring no tools, and PowerCon and 5-pin DMX connections in and out provide fast deployment and simple cable management.

The Studio Force Phosphor™ range also features fanless, studio & full modes for maximum control of the units, flat end plates for seamless wall-washing and a rugged extruded aluminium body.

The new Chroma-Q® Studio Force T 12 Phosphor™ is a 3,200K CCT, tungsten white fixture which utilises innovative LED technologies found in the Studio Force™ range to provide an equivalent soft edge output to a fluorescent fixture - up to 8,120 lumens - developed specifically for use in TV, film and broadcast studio environments. Other features include an extremely smooth uniform wash, extra soft beam, theatrical grade dimming, laboratory calibration to match Black Body Locus. Designed for practicality, the unit is equipped with a manual control mode, colour touch screen interface, fanless, studio & full modes for maximum control of the units and a range of optional accessories.

Key Features

• 3,200K CCT tungsten white


• Extreme output – up to 8,120 lumens


• Extra soft beam – very wide output


• Extremely smooth, uniform wash


• Theatrical grade dimming


• Ideal for film and studio applications


• Factory calibrated to match Black Body Locus


• 335mm / 13.2" length ideal for floor, wall or truss mounting


• Camera friendly


• PowerCon input and output for easy daisy-chaining of fixtures


• Broad range of accessories available, including barn door and spigot adaptor


• Fanless, studio & full control modes


• Intuitive colour touch screen interface


• Flat end plates for seamless wall-washing


• Built-in power supply


• Hidden quick release fixings


• Rugged extruded aluminium body


• Also available as a DC battery-powered version

Extreme OutputWith an extreme output of up to 8,120 lumens, the Studio Force T 12 Phosphor™ packs an impressive punch for its size.

Multi-purposeThe Studio Force T 12 Phosphor™ is specifically designed for film and studio soft lighting applications. Optional accessories include a spigot adaptor, egg crate louver, top hat, half top hat and barn door.

ColourThe Studio Force Phosphor™ range includes ColorSure™ technology for enhanced consistency across each light engine and when using multiple fixtures.

Optics & DimmingThe Studio Force Phosphor™ range's camera friendly custom optical design provides a smooth, uniform output, matched by theatrical grade dimming.

Practical & MechanicalOn the outside, the Studio Force T 12 Phosphor™ has been designed to provide maximum versatility and ease of use. The fixture features a colour touch screen interface for easy operation and a full manual control mode.

The built-in power supply, hidden quick release fixings requiring no tools, and PowerCon and 5-pin DMX connections in and out provide fast deployment and simple cable management.

The Studio Force Phosphor™ range also features fanless, studio & full modes for maximum control of the units, flat end plates for seamless wall-washing and a rugged extruded aluminium body.

The Chroma-Q® Studio Force D 12 Phosphor™ is a 5,600K CCT, daylight white fixture which utilises innovative LED technologies found in the Studio Force™ range to provide an equivalent soft edge output to a fluorescent fixture - up to 8,210 lumens - developed specifically for use in TV, film and broadcast studio environments. Other features include an extremely smooth uniform wash, extra soft beam, theatrical grade dimming, laboratory calibration to match Black Body Locus. Designed for practicality, the unit is equipped with a manual control mode, colour touch screen interface, fanless, studio & full modes for maximum control of the units and a range of optional accessories.

Key Features

• 5,600K CCT daylight white


• Extreme output – up to 8,210 lumens


• Extra soft beam – very wide output


• Extremely smooth, uniform wash


• Theatrical grade dimming


• Ideal for film and studio applications


• Factory calibrated to match Black Body Locus


• 335mm / 13.2" length ideal for floor, wall or truss mounting


• Camera friendly


• PowerCon input and output for easy daisy chaining of fixtures


• Broad range of accessories available, including barn door and spigot adaptor


• Fanless, studio & full control modes


• Intuitive colour touch screen interface


• Flat end plates for seamless wall-washing


• Built-in power supply


• Hidden quick release fixings


• Rugged extruded aluminium body


• Also available as a DC battery-powered version

Extreme OutputWith an extreme output of up to 8,210 lumens, the Studio Force D 12 Phosphor™ packs an impressive punch for its size.

Multi-purposeThe Studio Force D 12 Phosphor™ is specifically designed for film and studio soft lighting applications. Optional accessories include a spigot adaptor, egg crate louver, top hat, half top hat and barn door.

ColourThe Studio Force Phosphor™ range includes ColorSure™ technology for enhanced consistency across each light engine and when using multiple fixtures.

Optics & DimmingThe Studio Force Phosphor™ range's camera friendly custom optical design provides a smooth, uniform output, matched by theatrical grade dimming.

Practical & MechanicalOn the outside, the Studio Force D 12 Phosphor™ has been designed to provide maximum versatility and ease of use. The fixture features a colour touch screen interface for easy operation and a full manual control mode.

The built-in power supply, hidden quick release fixings requiring no tools, and PowerCon and 5-pin DMX connections in and out provide fast deployment and simple cable management.

The Studio Force Phosphor™ range also features fanless, studio & full modes for maximum control of the units, flat end plates for seamless wall-washing, and a rugged extruded aluminium body.

Brute Force has been designed to ensure optimal functionality across a variety of applications*.

Robustly designed and fully dimmable, the Brute Force utilizes multiple Chroma-Q Studio Force II™ 1.2m / 48” length tuneable white battens with an extended CCT range between 2,000K and 10,000K.

Each unit features mappable pixel control with RDM, DMX, and optional wireless operation.

With the Studio Force II Cine-Q mode, it is possible to control Brute Force as a variable CCT and an RGB-W mode at the same time and even crossfade from a white point to a saturated color.

Brute Force is available in 6-lamp (Brute Force 6) and 4-lamp (Brute Force 4) options. Brute Force 6 has on-board multi-point fixings to allow easy rigging and the option to combine units to form larger arrays - such as combining four units to create comparable output to a full Wendy light. Brute Force 4 is supplied with a yoke and standard TV spigot for conventional rigging.

In addition, the Studio Force II 48™ fixtures can be removed from the Brute Force mounting frames and used for other film wash and effects lighting applications.

• Realistic LED alternative to the traditional quarter 'Wendy' light


• Significantly reduced energy consumption - draws just 15 amps @ 240V


• No downtime due to lamp failures


• Produces tuneable whites, as well as pastel and saturated colours (2,800K - 6,500K / 2,000K - 10,000K extended CCT)


• Pixel mapping to generate 'effects' - e.g. fire & lightning


• Full creative control from a lighting desk or media server

OPTIONAL WEATHER COVER ACCESSORY

*To provide an additional level of protection when using Brute Force outdoors or in studio-simulated weather conditions, the fixture must be fitted with the Weather Cover optional accessory and used in accordance with the operation instructions provided. Always consult the product manual for full details. Additional precautions should be taken to protect the fixture when operated in severe weather conditions.

• High quality, pure, diffused soft lighting


• Variable white - 2,800K - 6,000K


• Smooth, soft uniform beam


• Up to 55,000 lumens


• 8 individually control zones


• Convection cooling for quiet operation


• Lightweight (21.4kg / 47lbs) with built-in power & dimming


• Standard 24.6” x 48.5” size, 1:2 ratio (fits in a drop ceiling tile)


• Variable PWM flicker-free operation


• Wireless DMX (optional) / RDM


• Chroma-Q’s proven LED performance

The panel's 2x4 ratio and compact dimensions enable it to be mounted side-by-side, overhead or on a wall, to create a huge volume of light in a standard room ceiling height studio or a small space. A dual sliding slots system allows for various beam control options to be mounted on the fixture.

Highly efficient and natively single-source, the twobyfour is CCT variable between 2,800K and 6,000K, with an output of up to 55,000 lumens. The fixture provides high colour rendering indexes, which are requirements for light sources used in the film and TV industry to ensure accurate colour rendering.

The twobyfour allows for individual control of 2, 4 or 8 sections’ intensity and CCT – creating various shades and effects.

Convection cooling provides quiet operation for studios, and its low consumption provides a cooler working environment, reducing air conditioning needs to further boost energy savings.

With manual & remotely controllable LED frequency up to 96,000Hz, the twobyfour ensures flicker-free operation. Extensive DMX / RDM functionality is provided through wired, or the optional LumenRadio CRMX, connections.

The fixture's built-in power & control electronics make it quick and easy to set up. Built to last, the twobyfour requires minimal maintenance and retains colour consistency between units owing to our LED emitter inspection and proprietary ColorSure™ LED calibration system.

• High quality, pure, diffused soft lighting


• Variable white - 2,800K - 6,000K


• Smooth, soft uniform beam


• Up to 13,800 lumens


• Convection cooling for quiet operation


• Lightweight (8.5kg / 19lbs) with built-in power & dimming


• Standard 12” x 25” size, 1:2 ratio fits small spaces


• Variable PWM flicker-free operation


• Wireless DMX (optional) / RDM


• Chroma-Q’s proven LED performance

Featuring 15 years of LED innovation and our award-winning Space Force™ LED space / soft light’s technologies, the onebytwo is the ideal fit for standard room ceiling height studios and small spaces.

The panel’s 1x2 ratio and compact dimensions enable it to be mounted side-by-side in either ratio, overhead or on a wall, to create a huge volume of light in a small space.

Highly efficient and natively single-source, the onebytwo is CCT variable between 2,800K and 6,000K, and has an output of up to 13,800 lumens. The fixture provides high colour rendering indexes, which are requirements for light sources used in the film and TV industry to ensure accurate colour rendering.

Convection cooling provides quiet operation for studios and a cooler working environment, as well as reducing air conditioning needs to further boost your energy savings.

With manual & remotely controllable LED frequency up to 96,000Hz, the onebytwo ensures flicker-free operation. Extensive RDM functionality is provided through wired, or the optional LumenRadio CRMX, connections.

The lightweight design only 6.5 kg /14.3 lb (Without Yoke); 8.5kg / 19lbs (With Yoke) incorporates all power & control electronics, making it quick and easy to set up. Built to last, the onebytwo requires minimal maintenance and retains colour consistency between units owing to our LED emitter inspection and proprietary ColorSure™ LED calibration system.

Optional accessories include a hanging offset bracket, 4-way bridle, and a full range of beam control accessories.

The Chroma-Q® Space Force™ LED fixture - the next frontier in space lighting. The Space Force™ is a cutting-edge variable white LED Space Light that is a modern replacement for conventional space lights or soft light sources commonly used in film and TV studios around the world. The Space Force™ benefits from cool running, energy efficiency, lightweight design, and minimum maintenance. CCT tuneable between 2,800K and 6,000K, and natively single source, the diffuse nature of its output negates the need for silks or skirts. Extensive RDM functionality is provided through wired, or the optional LumenRadio CRMX, connections.

Hanging options include a standard bridle, optional yoke, and a low-profile hanging bracket.

Key Features

• Comparable to a traditional 6kW fixture


• Up to 26,700 lumens


• Variable white – 2,800K to 6,000K


• Only 8kg / 17.6lb


• No fans, no noise


• Smooth, soft uniform beam


• Variable PWM flicker-free operation


• Multiple hanging options


• Wireless DMX / RDM


• Superior unit-to-unit consistency


• Chroma-Q's proven LED performance