SEEDER RB18TS Robotic Telescopic Crane

• The DJI Ronin-SC Gimbal Stabilizer brings many improvements over its predecessor, the Ronin-S, with this smaller and lighter stabilized, three-axis single-handle gimbal, designed for small mirrorless cameras under 4.4 lb. Though the Ronin-SC is smaller, it packs an abundance of features, design enhancements, and technology inside its compact form. The gimbal features stabilization, pan, tilt, and roll control, as well as 360° continuous panning to create steady 3D/360° motion shots.On its own, the gimbal weighs only 2.4 lb, so it is ultra-portable and makes it easier to hold the gimbal with a mounted camera for longer periods of time. It features two locking modes for balancing your camera and for storage. The sliding quick release camera plate makes it easy to rebalance your camera after you've moved to a new location—balance your camera in the balancing lock position, unmount your camera with the plate, put the gimbal in storage mode and travel, take the gimbal out and remount your camera, unlock and turn the gimbal on and voilà, your camera will still be balanced.The Ronin-SC features a record button and a joystick for precise gimbal control, as well as a re-center front trigger button to bring the gimbal back to its default position. There is also an M button that you can press and hold to enter Sport Mode, which provides fast tracking response when recording action sequences. Using the Android or iOS app over Bluetooth 5.0, Active Track 3.0 has been updated to help users track a subject with the gimbal without having to use any controls at all. Another handy function is DJI's Force Mobile, which allows you to control your gimbal's motion when it's mounted on a rig or tripod using the gyroscope of your smartphone, allowing you to perform more precise gimbal movements using your own natural motion. Other built-in features include time-lapse and motion-lapse modes.The Ronin-SC is powered by a 2450mAh rechargeable 18650 LiPo battery built into its handle, which lasts up to 11 hours on a single charge. It is charged via a USB Type-C port and can also provide camera control such as run/stop or focus pulling using one of the included multiport USB cables connected to a compatible camera. There are also 1/4"-20 and 3/8"-16 mounting threads on the handle to add accessories such as the included smartphone holder.Also included with the Ronin-SC are an extended grip/tripod, camera riser, lens support, port cover, Allen wrench, quick release plate with 1/4"-20 camera mounting screw, an M4 screw, a multicamera USB control cable, a multicamera USB Type-C control cable, a USB Type-C charging cable, a USB Type-C to micro-USB adapter, and a storage case.


• Buy DJI RONIN SC Gimbal Stabilizer From UBMS Dubai.

Sachtler System aktiv8 flowtech75 with sideload and mid-level spreader

Weighing only 6.3 kg (13.9 lbs.) the aktiv8 flowtech75 system is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital cine camera set ups of up to 12 kg (26.5 lbs.). 15 counterbalance steps allow for fast and precise balancing of your camera. Its sideload mechanism with a long sliding range of 120 mm make loading and positioning the camera quick and easy. Seven drag settings provide smooth and fast options to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height. Buy Aktiv System aktiv8 flowtech75 MS from UBMS Dubai . We can provide best price and fast delivery for aktiv8 flowtech75 MS

Fluid Head

The aktiv8 fluid head with the unique SpeedLevel™ technology can be levelled in seconds giving you time to get the perfect shot in documentary, corporate, or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.

Tripod

Capture the widest range of shots in the shortest time with aktiv8 combined with flowtech75. With no bowl clamp required, flowtech can go flat to the ground for extreme low-angle shots – using the versatile hinge lock mechanism of flowtech. The system delivers the widest height range. The 2-stage carbon fibre flowtech tripod with high torsional stiffness has unique quick release brakes which can be deployed and adjusted in an instant. Its ergonomic design makes the tripod comfortable to carry, on shoulder or carry handle, no matter where your creativity takes you. flowtech comes with a quick attach rubber foot mechanism and an adjustable mid-level spreader. When you are ready to move on, the legs are hold together by a magnetic lock for transportation.

Buy Sachtler system aktiv8 Sideload with flowtech75 tripod from UBMS Dubai.

Weighing only 6.2 kg (13.7 lbs.) the aktiv6 flowtech75 system is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital cine camera set ups of up to 8 kg (17.6 lbs.). 15 counterbalance steps allow for fast and precise balancing of your camera. Its sideload mechanism with a long sliding range of 120 mm make loading and positioning the camera quick and easy. Three drag settings provide smooth and fast options to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height. Buy Aktiv System aktiv6 flowtech75 MS from UBMS Dubai . We can provide best price and fast delivery for aktiv6 flowtech75 MS

Fluid Head

The aktiv6 fluid head with unique SpeedLevel™ technology can be levelled in seconds giving you time to get the perfect shot in documentary, corporate, or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.

Tripod

Capture the widest range of shots in the shortest time with aktiv6 combined with flowtech75. With no bowl clamp required, flowtech can go flat to the ground for extreme low-angle shots – using the versatile hinge lock mechanism of flowtech. The system delivers the widest height range. The 2-stage carbon fibre flowtech tripod with high torsional stiffness has unique quick release brakes which can be deployed and adjusted in an instant. Its ergonomic design makes the tripod comfortable to carry, on shoulder or carry handle, no matter where your creativity takes you. flowtech comes with a quick attach rubber foot mechanism and an adjustable mid-level spreader. When you are ready to move on, the legs are hold together by a magnetic lock for transportation.

Buy Sachtler Aktiv System aktiv6 flowtech75 MS from UBMS Dubai

This Sachtler aktiv™ 100 mm fluid head for payloads of up to 12 kg (26.5 lbs.), with unique SpeedLevel™ technology, can be levelled in seconds giving you time to get the perfect shot in documentary, corporate or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility. Buy Aktiv10 Fluid head from UBMS Dubai . We can provide best price and fast delivery for Aktiv10 fluid head

• Level and lock your head in an instant without missing a second of actionUnique SpeedLevel technology.


• Visible from any height or angle - day or night.Innovative PrismBubble.


• Capture extreme low angle shots right down to the ground.Innovative streamlined mounting system.


• Switch between tripod and slider in seconds.Revolutionary SpeedSwap system.


• Create moving stories, whatever the weather.Performance tested to the extreme.

This Sachtler aktiv™ 75 mm fluid head for payloads of up to 12 kg (26.5 lbs.), with unique SpeedLevel™ technology, can be levelled in seconds giving you time to get the perfect shot in documentary, corporate or news applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility. Buy Aktiv8T Fluid head from UBMS Dubai . We can provide best price and fast delivery for Aktiv8T fluid head

• Level and lock your head in an instant without missing a second of actionUnique SpeedLevel technology.


• Visible from any height or angle - day or night.Innovative PrismBubble.


• Capture extreme low angle shots right down to the ground.Innovative streamlined mounting system.


• Switch between tripod and slider in seconds.Revolutionary SpeedSwap system.


• Create moving stories, whatever the weather.Performance tested to the extreme.

Buy SACHTLER AKTIV8T FLUID HEAD from UBMS Dubai

ZHIYUN CRANE 3S Handheld Stabilizer is a powerful redesign of previous gimbals with more powerful motors to handle up to 6.5kg payloads allowing to use it with heavier camera setups like Canon EOS 1DX, Blackmagic Pocket Cinema Cameras, Canon Cinema EOS, Sony FS and FX series, and RED Digital Cinema cameras, etc

The CRANE 3S Handheld Stabilizer from Zhiyun-Tech is a powerful redesign of previous Zhiyun gimbals with the addition of detachable handle options, more powerful motors with a large 14.3 lb payload, an updated axis-locking system, external power input, and the ViaTouch 2.0 remote control system. The 55° angled roll axis allows you to fit your camera without blocking the view, and it is also modular so you can add an included extension arm to fit larger cameras. CRANE 3S Price is very good in UBMS Dubai Showroom. Come and experience the CRANE 3S at UBMS showroom and get the best price. We can ship CRANE 3S to all GCC countries (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia ) & African Countries.

From intense chasing shoot to studio filming, different types of shooting environment require both high capacity and flexibility of shooting equipment. Bearing filmmakers in mind, ZHIYUN felt the Crane series can be even better to adapt to strict and unpredictable filming environment. Now introducing the new CRANE 3S, the legendary gimbal built on a heritage of innovation with magnificent motors and brand new modular design, which aims for wider application and intuitive control. It is not simply an upgrade but reconstruction. CRANE 3S is constructed with brand new SUPER motors which allow for Max. 6.5kg payload for a wide range of camera setups.

The CRANE 3S features an angled, ergonomic handle that provides two-handed operation for optimal stability. The handle enables you to seamlessly switch to underslung mode, whether with one or two hands, and achieve creative shots such as 330° roll shots as you move closer toward a subject. It also has numerous advanced features such as remote control of camera record/stop/shutter using the included cables, an improved zoom and focus system from its predecessor the CRANE 3 LAB, and compatibility with the separately available Transmount Image Transmission System for wireless video transmission. It can also accommodate a wide range of camera sizes by utilizing a separately available extension module to extend the horizontal arm.

Wider compatibility is the goal but flexibility is provided. For larger cinema camera combos, users can attach an extension module onto roll axis for more space, while for smaller DSLR combos, the extension module can be detached for greater portability.

The 3S has two options for the detachable, angled handle. Included is the SmartSling that offers an ergonomic handle with an integrated joystick and control buttons, and the optional EasySling provides a simple, comfortable handgrip without controls. All the controls you need are provided at your fingertips at the top of the main handle along with an OLED status screen. The free Zhiyun iOS/Android app provides many of the same control functions, as well as special features such as panorama, focus time-lapse, motion time-lapse, long exposure time-lapse, camera settings, and more.

On CRANE 3S, the handle is detachable with two options provided: TransMount EasySling Handle and TransMount SmartSling Handle. You can either mount EasySling handle to extend the grip for more comfort upright & underslung operation, or choose to mount SmartSling handle featuring an intuitive control panel and OLED screen, for direct camera & gimbal parameter adjustment, or combine them together!

You can power the 3S using the three included batteries for up to 12 hours. However, if you need extra shooting time, a DC port allows you to plug in an optional battery pack such as the Transmount PowerPlus that contains six 18650 batteries, extending your shooting time to up to 18 hours. The CRANE 3S can be controlled using the updated ViaTouch 2.0 iOS or Android smartphone app via Bluetooth 5.0 for remote motion control and to manage the gimbal settings.

Buy Zhiyun-Tech CRANE 3S Handheld Stabilizer From UBMS Dubai.

The DJI Ronin-S is a superior 3-axis stabilization system for DSLR and mirrorless cameras that features a 3.6 kg tested payload capacity, camera control, and automated smart features. The modular design empowers creators with the freedom to shoot stabilized shots on the move. Buy DJI Ronin-S Gimbal Stabilizer for best price. The detachable, modular design of the Ronin-S makes it easy to fit inside a backpack on your travels. Thanks to the industry standard quick-release plate design, you can easily mount the camera onto the gimbal for tracking shots or on a tripod for stills. The Ronin-S is DJI's first handheld gimbal for DSLR cameras. With a max operating speed of 75 kph, tested payload capacity of 3.6 kg, automated smart features, and support for a wide range of cameras and lenses, the Ronin-S gives all filmmakers the freedom to film on the move

Operating the Ronin-S is easy and intuitive to setup with Auto Tune directly on the gimbal for optimal torque control. Powerful, high torque motors actively stabilize your shot when mounted to moving platforms at speeds of up to 75 kph. he Ronin-S supports almost any DSLR or mirrorless camera setup on the market, offering direct camera control.

Focus better on your subject with the easy-to-control Focus Wheel. When a compatible camera system connects to the Ronin-S, you can pull focus via the included cable. An optional external motor can also be added, bringing broader compatibility to all lens types while enhancing precision control . The Ronin-S's innovative framework elevates camera payload above the roll axis, making the camera's built-in display obstruction free and always in your line of sight. In addition to providing an unobstructed view, the angled roll motor allows for more space to balance bulkier setups.

Designed in a single-handed form factor for DSLR and mirrorless cameras, the Ronin-S empowers creators to shoot with the freedom of stabilized shots on the move.

The DJI Ronin-S is more than just a miniaturized version of the larger Ronin gimbal stabilizers; it represents a scalable ecosystem for integrating DSLR and mirrorless cameras into professional-grade workflows. The single-handed form factor of the Ronin-S lends itself to lighter cameras. But don't let its size fool you; the Ronin-S has a lot going on under the hood. Separate modules are available for the handle and accessory docks, allowing you to customize the gimbal based on how you wish to operate it.

Buy DJI Ronin-S Gimbal Stabilizer From UBMS Dubai.

The Ronin-S Essentials Kit is a bundle that includes the Ronin-S and key accessories that differ from what comes with the standard Ronin-S. While this bundle does not have a focus wheel and some other accessories that the standard Ronin-S includes, the Essentials Kit does provide a host of key accessories designed to get you shooting right away while offering a substantial savings.The Ronin-S represents a scalable ecosystem for integrating DSLR and mirrorless cameras into professional-grade workflows. The single-handed form factor of the Ronin-S supports up to 8 lb and runs up to 12 hours on a single charge of the included battery grip. Additionally, separate modules are available and sold separately for the handle and accessory docks, allowing you to customize the gimbal based on how you wish to operate it.

Between the front trigger, the rear mode button, and the joystick, precise gimbal control lets you obtain the shots you require. The front trigger can lock the gimbal when held, re-center the gimbal when tapped twice, and engage the Selfie mode by turning 180° when tapped three times. Press the mode button to engage three customizable operation profiles, each with tuneable speed and response for different shooting scenarios. If fast-moving subjects are your forte, the Sport mode delivers extra-quick response times and fast gimbal movements, up to a maximum speed of 45 mph. With this operation flexibility, the Ronin-S will fit into documentary, event, and feature film workflows.The gimbal and all included accessories can be stored inside the included case, which helps protect your equipment during storage and transport.

Buy DJI RONIN-S Essential Kit from UBMS Dubai.

Sachtler System aktiv10 flowtech100 with sideload and mid-level spreader

Weighing only 6.9 kg (15.2 lbs.) the aktiv10 flowtech100 system is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital Cine camera set ups of up to 12 kg (26.5 lbs.). 15 counterbalance steps allow for fast and precise balancing of your camera. Its sideload mechanism with a long sliding range of 120 mm make loading and positioning the camera quick and easy. Seven drag settings provide smooth and fast to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height.Buy System aktiv10 flowtech100 MS from UBMS Dubai . We can provide best price and fast delivery for System aktiv10 flowtech100 MS

Fluid Head

The aktiv10 fluid head with unique SpeedLevel™ technology can be levelled in seconds giving you time to get the perfect shot in documentary, corporate, news or wildlife applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.

Tripod

Capture the widest range of shots in the shortest time with aktiv10 combined with flowtech100. With no bowl clamp required, flowtech can go flat to the ground for extreme low-angle shots – using the versatile hinge lock mechanism of flowtech. The system delivers the widest height range. The 2-stage carbon fibre flowtech tripod with high torsional stiffness has unique quick release brakes which can be deployed and adjusted in an instant. Its ergonomic design makes the tripod comfortable to carry, on shoulder or carry handle, no matter where your creativity takes you. flowtech comes with a quick attach rubber foot mechanism and an adjustable mid-level spreader. When you are ready to move on, the legs are hold together by a magnetic lock for transportation.

Buy Sachtler System aktiv10 flowtech100 from UBMS Dubai

DJI OM 4 is a magnetic 3-axis smartphone gimbal that keeps video effortlessly smooth. Intelligent features make creating impressive content a snap. Life’s extraordinary moments deserve to be captured with smooth video. DJI OM 4 is a foldable stabilizer designed to complement your smartphone, allowing you to start recording right away. Magnetic, ultra-compact, and bursting with easy-to-use features, OM 4 is the ultimate solution for sharing your world.

Equipped with 3-axis stabilization, DJI OM 4 turns your mobile phone into a camera that can deliver stabilized and super-smooth image. The foldable design makes DJI OM 4 conven- ient to transport and store, while the brand new magnetic connection for the phone means it is even easier to use. Lightweight and ergonomic, DJI OM 4 puts seamlessly smooth video creation at your fingertips. Get creative with features such as ActiveTrackTM 3.0, Hyperlapse, Timelapse, DynamicZoom, Pano, and Story mode that are available through DJI Mimo. Buy DJi OM 4 from UBMS Dubai. We can provide best price and fast delivery for DJI OM4.

• Supports up to 3.3" wide smartphones


• Magnetic smartphone mount with intelligent sensor


• Ultracompact, foldable design with redesigned comfort handgrip


• High-torque motor


• Easy to balance


• Handle set at natural 15° angle


• Controllable range: -162.5 to 170.3° pan / -104.5 to 235.7° tilt / -85.1 to 252.2° roll


• Bluetooth 5.0 support


• Controllable speed: 120°/s max


• Built-in battery: Up to 15-hour runtime / 17.64Wh capacity, 2450mAh


• 1/4"-20 tripod mounting thread


• USB Type-C power input, USB Type-A power output for smartphone or accessory


• Grip tripod included

• ActiveTrack 3.0 technology built into the app allows the OM 4 to automatically keep your phone facing you as you move


• Gesture control: Reads certain hand gestures to take a still, record video, or track a subject


• Body shape recognition for more accurate tracking of a person


• New Sport mode for faster movements


• Modes/Functions: Standard, Portrait, Underslung, Flashlight, Time-Lapse, Hyperlapse, and Panorama


• Live stream moments using YouTube Live


• Take one-second-long exposures to produce light trails, star trails, and dramatically blurred cars without a tripod

Introducing the CRANE 2S. Widely recognized as the exemplar of 3-axis handheld gimbals for professional filmmakers, the CRANE 2 series is proud to present you a newest masterpiece that witnessed numerous hardworking days and nights of ZHIYUN R&D team—CRANE 2S. Featuring high load capacity and modular design, the CRANE 2S is keen on delivering reliable and excellent performance, even in the most challenging environments. ZHIYUN Official Crane 2S 3-Axis Handheld Gimbal Camera Stabilizer for All DSLR Canon BMPCC Sony Panasonic Cameras

Key Features

• 9th Instune Algorithm with high axis responsiveness


• Support for large cameras such as the Blackmagic Pocket 6K, Panasonic S1H, and Canon EOS 1DX Mark II


• Six modes: pan follow, lock, follow, full-range POV, vortex, and Go modes


• Dedicated mounting points for attaching an optional Zhiyun-Tech TransMount transmitter


• FlexMount camera mounting system with a double safety mechanism


• Vertical quick release camera mount


• Quick release plate compatible with many tripod heads and sliders


• Two-phase axis locking mechanism for balancing a camera and for storage/travel


• Carbon fiber handle


• Low-delay handwheel performance when used with optional lens motors


• Up to 12-hour runtime on three included removable batteries


• 360° pan motion


• 0.96\" OLED screen


• Panorama, time-lapse, motion-lapse, and long exposure time-lapse via the companion app


• 1/4\"-20 thread on the bottom

Videographers have to constantly switch between different cameras to ensure they are using the optimal tools for the task at hand. CRANE 2S is ready to embrace this challenge. With highly optimized motors, CRANE 2S handles larger cameras such as the BMPCC 6K, Panasonic S1H, EOS 1DX Mark II with ease. The new generation 9th Instune Algorithm ensures smooth, reliable performance even in time-sensitive tasks.

Ensuring you won\'t miss any critical shots, CRANE 2S features FlexMount System which greatly simplifies the setup process while at the same time securing your valuable camera gear with a double safety mechanism. For the first time in the industry, CRANE 2S comes with a quick release mount along with a safety knob on tilt axis which allows users to switch to vertical shooting in a snap without need of additional accessory installation. Buy all Zhiyun Gimbals from UBMS for best price.

The lightweight but strong carbon fiber handle of the CRANE 2S is another key feature that makes this a reliable and sturdy workhorse while offering more secure hand feel.

CRANE 2S is built on the classic design of CRANE 2 while reinvented in details. The new 0.96-inch OLED screen in the CRANE 2S offers a wider view that enable you to navigate through the entire menu system and switch between modes swiftly. CRANE 2S will be available in UBMS Dubai showroom soon .

Brand new axis lock system is introduced to CRANE 2S. Once locked, the axis will stay absolutely still without any swinging, rest assure your camera equipment is 100% safe on the gimbal while traveling or in storage.

For boost real-life filming efficiency, CRANE 2S is equipped with multiple mounting points: a 1/4\" screw hole on the back of the quick release base plate for the camera to shift between different devices such as sliders and tripods; Two 1/4\" screw holes with crown gear and a 3/8\" screw hole on the gimbal for creative adaptation. The TransMount Image transmitter can directly slide into the bottom of quick release base plate without screws. Buy Zhiyun CRANE 2S from UBMS Dubai for best price . We can provide free delivery inside UAE . We can ship CRANE 2S to all GCC countries (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia ) & African Countries .

CRANE 2S also pushes boundaries with its film grade focus control ability. With a built-in focus control wheel and servo follow focus motor that realizes next level precision control, Crane 2S is ambitioned to escort your ultimate creative journey.

Zhiyun’s CRANE 2S provides six gimbal modes with buttery smooth movement, satisfying all demands from basic to advanced: pan following, locking, following, full-range POV, Vortex mode, and Go mode. Advanced cinematic effects such as Panorama, Timelapse, Motionlapse, and Long Exposure Timelapse are easy to achieve with the CRANE 2S.

The TransMount ecosystem of accessories serves videographers with the TransMount image transmission system, monopod, mini dual grip, dual handle and more.

The CRANE 2S uses three removable 18650 Li-ion batteries, providing a standard 12-hour runtime. Videographers can easily extend the runtime with backup batteries.

To meet the needs of different work tasks, videographers have to constantly switch among different cameras and CRANE 2S is ready to embrace the challenge. Highly optimized in motor control algorithms and motor power, CRANE 2S handles large cameras such as the BMPCC 6K, Panasonic S1H, Canon EOS 1DX Mark II, Nikon D850 with total ease. More than that, you can also mount multiple accessories on it.

To make sure that you won\'t miss any decisive shots, CRANE 2S features brand new FlexMount System which greatly simplifies the setup process while at the same time secures your camera with a double safety mechanism.You can even adjust the tightness of the safety lock to suit your specific needs.

With mobile traffic gaining the upper hand, it\'s foreseeable that videographers will receive more work requests on vertical content. CRANE 2S comes standard with a vertical quick release mount and a safety knob for high-quality vertical shooting.

Designed for high-efficiency team collaboration, CRANE 2S is equipped with a dedicated slot for installing image transmission transmitter.

Multiple mounting points are available on the gimbal for creative adaptation: One 1/4\" screw hole on the back of the quick release plate for the camera to shift between different devices such as sliders and tripods; Two 1/4\" screw holes with crown gear and one 3/8\" screw hole.

Raising the bar on movement quality and shot framing control, the recently launched Shotoku SX200 and SX260 pan and tilt heads incorporate a brand-new design featuring Shotoku’s “Truebalance” for perfect counterbalance that is also easy to adjust throughout the range and has an intuitive display to indicate the current setting.  The drag system uses Shotoku’s well known Viscam design but adds a new actuation system that combines the convenience and speed of selection of a stepped system, with the fine tuning and on-shot adjustment of a continuously variable design. The SX200 has a max payload of 44Lbs (20Kg) and the SX260 55Lbs (25Kg).  The systems come standard with 2 stage ENG Carbon Fibre legs and is one of the lightest on the market at these payloads.

WHAT’S NEW - With these SX200/SX260 heads crossing over to the EFP application, the new TTH1002C 100mm carbon fibre EFP tripod has been added to provide an extremely rigid solution, useful when using longer lenses for sports and documentary production.

The TR-XT Control System with multiple enhancements further expands the capabilities of this already powerful and intuitive control system.

LiveView

The TR-XT, the flagship control system of the Shotoku platform, offers a new LiveView option that uses a secondary IP video camera to provide a wide-angle scene view for each camera. LiveView enables operators to command heads to new positions simply by touching on a wide-angled live video view of the studio, smoothly repositioning the head towards the selected presenter, guest or other area of interest.

Studio Zones

Studio zones easily define areas within a studio into which cameras may or may not travel.  Zones have a dynamic understanding of studio equipment to avoid no-go areas and potential collisions.  In addition to each SmartPed’s unique on-board collision avoidance system, Studio Zones offers a higher level of control for the operator to ensure smooth and safe operation within the environment.

Full Automation

Shotoku also features its enhanced automation interfaces allowing not just pre-set shot recall but full camera adjustment on-the-fly from external systems, even including face-recognition and tracking systems.  This advanced technology brings the concept of operator-less control into reality!

Portable yet professional with compatibility - That's what describes CRANE-M3 the best. Compact body design and optimized axis arm structure deliver a better gripping and user experience. With the brand new dual color temperature lighting and professional audio solution, CRANE-M3 offers an outstanding filming experience without extra equipment. Buy Crane M3 from UBMS Dubai.

Key Features

• Compact structure for mounting with multiple devices


• 1.22” Touch screen for single-handed operation


• Built-in dual color temperature fill light


• Upgraded quick release system 4.0


• All-New Sleek Design


• Multi-functional expansion base and professional audio solution


• PD 12W fast charging

The CRANE-M3 offers 360° pan, 309° tilt, and 333° roll rotation across seven modes of operation, including follow, pan-follow, POV, portrait, GO, lock, and Vortex modes, and it can also be adjusted manually if required. It runs for approximately eight hours using its built-in 1150mAh battery that's rechargeable using an included USB Type-C cable, and you can also power the gimbal using a power bank while operating the gimbal. The color OLED display confirms the selected operation mode, battery level, Bluetooth/Wi-Fi status, and other functions. Scale marks and memory locks help you balance the camera and lock the balance position for the camera used.

Over built-in Wi-Fi, the gimbal can sync up with a Wi-Fi-enabled camera that supports remote zoom, shutter, and video start/stop control, or you can utilize a camera control cable and the USB Type-C port on the baseplate to control the camera shutter and also power the camera. Over built-in Bluetooth, the camera syncs up with a free-download ZY Play mobile app for iOS and Android for additional capabilities. The app provides remote control over many functions of the gimbal and has filmmaking features such as time-lapse, panorama, and slow-motion capture. The integrated LED light allows you to utilize a fill light for your subject without the requirement of external lights.

New

• Design. White color fashion design and excellent gripping experience.


• Performance. Same size as a 550ml bottle of water. Compatible with 90% of the mirrorless camera.


• Setup. Customized quick release design. Swap batteries without rebalancing.


• Image Quality. Built-in LED fill light. 800 Lumens.


• Audio Quality. Connection with professional microphone.

Industry firsts

Sporting an all-new, modern white chassis, punctuated with black and red, the CRANE M3 is visually-striking. Small yet mighty, the CRANE M3 is the size of a 550ml water bottle made of robust, composite materials, its compact body design, reverse-loaded motors and optimised axis arm structure, deliver a better gripping and user experience.

Compatible with over 90% of mirrorless cameras, the CRANE M3 is designed with convenience in mind. The gimbal’s quick-release design enables rapid interchange between compact action, DSLR and smartphone cameras as well as battery-changes without the need for rebalancing. Furthermore, easy connection to a professional microphone via the expansion base reduces the need for rebalancing. With its upgraded motors with stronger torque, guaranteeing stable movements and brand new in-built dual color 800-lumen LED temperature lighting and professional audio solution, CRANE-M3 offers professional videographers outstanding filming experience without extra equipment.

Agile set-up via quick release plates

The hot swapping capability of the CRANE M3, thanks to the upgraded TRANSMOUNT Quick Release plates enables easier balancing, assembly and disassembly - perfect for professional filmmakers who might like to use a variety of equipment within a shoot.

The one-size-fits-all plate also eliminates the inconvenience of rebalancing the stabiliser after changing cameras, and facilitate seamless battery change. Anyone using a variety of media or for vloggers who wish to upgrade from a smartphone to a compact mirrorless camera further down the line, a quick change “universal” plate comes standard with the CRANE M3.

Once the plate is in place, the CRANE M3’s 3-click mechanism reliably secures the camera in position via tilt-, roll and pan axes locks. The locks with their transverse palm-rejection, efficient design protect cameras and offer optimal responsiveness and stabilisation capabilities, meaning that videographers can concentrate on the action at hand, without worrying about their camera or shakiness.

The M3 features innovative locks and latches for storage. Gimbal can be adjusted to half-storage/full-storage mode. No axis arm adjustments are required when switching to half-storage mode with a mounted camera, and no rebalances needed when expanded.

Compact and convenient light and sound solution

Impromptu low-light shooting is no longer a problem with the CRANE M3. Thanks to its pioneering in-built 800 lumen LED fill light, powered uniquely from heat generated by the gimbal, the stabiliser offers an intense natural lighting solution with full stepless dimming control and temperature settings via a control wheel. The light adopts high-level cooling technology to quickly dissipate the heat while providing great brightness. Additionally available are magnetic

light filter accessories for the LED light, in four different colours. At peak power 6W, the M3s lighting reads are as follows: colour temperature levels: 3000-5400K, brightness: warm light 650-750, white light 850-950, CRI (Colour Rendering Index) 90+.

On-the-hoof, live interviews couldn’t get easier with the CRANE M3’s TransMount Expansion Base to which professional microphones can be directly connected. The base bypasses connecting the microphone via the camera, thus removing the need for: additional cables, extra weight on the camera, and further adjustments to the gimbal. The M3 comes with a TransMount Shotgun Microphone as standard, however, the 6.5mm connecting audio port can also support a range of wired professional microphones for clear audio performance with cardioid/hypercardioid patterns.

Exceptional control through touchscreen and one-handed operational

The CRANE M3 offers the professional filmmaker a range of exceptional control options. The new gimbal has a built-in receiver at the base which can be paired with the transmitter module for wireless control of mainstream cameras via Bluetooth. Furthermore, the M3’s design brings one-handed, ergonomic operation capabilities through its versatile control wheel and joystick buttons that support adjustments to roll axis, aperture, shutter and ISO to optimally position your camera for perfect footage.

New to the CRANE series is the added feature of an interactive 1.22”, full-colour HD interactive touchscreen enabling parameter adjustments to a range of gimbal mode settings (portrait, vortex mode and go-mode) as well as follow speed. The intuitive display panel also indicates camera operational status, connection to the gimbal and battery levels. Buy CRANE-M3 from UBMS Dubai

Features

1. 100 mm diameter air cylinder, double color digital barometer

2. Pedestal Payload:50kg, On-shot Stroke: >390mm

3. Damping plate structure and effective counterbalance system

4. Pedestal and fluid head by CNC machine ensure high precision and intensity

5. High performance dolly with brake

6. Suitable for studio high definition video camera, counterbalance grades up to 16 x 2

Technical Specifications

Pedestal Tripod

1. Pedestal Payload:50kg

2. Diameter of Air Cylinder:100mm

3. On-shot Stroke: >390mm

4. Double Color Digital Barometer

Fluid Damping Fluid Head

1. Bowl Size:100mm

2. Payload Range:1kg-20kg

3. Counterbalance:16x2

4. Grades of Drag: horizontal 8/vertical 8

5. Tilt Range: +90°/-80°

System Specifications

1. Working Height:990mm-1750mm

2. Temperature Range: -40°C/+60°C

3. Weight:23.5kg

Standard Configuration

1. S20H, fluid head with full CNC technology

2. PL200, quick release plate

3. Each 2 pieces of 3/8” and 1/4” screw

4. PB100, dual telescopic pan bar

5. PT50 pedestal system with 100 mm adapter base and barometer charger

6. Direction adjustable dolly

Features

1. 90 mm - 110 mm diameter air cylinder, double color digital barometer

2. Pedestal Payload:80kg, On-shot Stroke: >700mm

3. Damping plate structure and effective counterbalance system

4. Pedestal and fluid head by CNC machine ensure high precision and intensity

5. High performance dolly with brake

6. Suitable for studio high definition video camera, counterbalance grades up to 16 x 2

Technical Specifications

Pedestal Tripod

1. 2-stage pedestal

2. Pedestal Payload:80kg

2. Diameter of Air Cylinder:90mm-110mm

3. On-shot Stroke: >700mm

4. Double Color Digital Barometer

Fluid Damping Fluid Head

1. Flat bottom installation

2. Payload Range:6kg-60kg

3. Counterbalance:16x2

4. Grades of Drag:horizontal10/vertical10

5. Tilt Range: +90°/-80°

System Specifications

1. Working Height: Bowl State: 1080mm -1850mm Flat Bottom State: 820mm - 1590mm

2. Temperature Range: -40°C/+60°C

3. Weight: 30kg

Standard Configuration

1. S60H full CNC fluid head, with 30 seconds luminous horizontal bubble

2. V-type quick release plate

3. Each 2 pieces of 3/8” and 1/4” screw

4. PB100, dual telescopic pan bar

5. PT800 two-stage pedestal system with adapter base and barometer charger

6. Direction adjustable dolly

The SEEDER S20PT50VR is designed for virtual studio and event production. This head & pedestal VR tracking system adopts 23 bit absolute value encoder and full CNC processing. The tracking accuracy of pan & tilt/X/Y/Z  up to 8,300,000 /360°, it is RS422 and directional UDP simultaneous output. It has auto-adjustment function of lens delay and tracking delay. One-time calibration makes it easy for camera operators.

Features

1. 100 mm diameter air cylinder, double color digital barometer

2. Pedestal Payload:50kg, On-shot Stroke: >390mm

3. Pan/tilt/X/Y/Z adopt 23 bit absolute encoder with tracking resolution of 8,300,000 / 360 °

4. Collect ZOOM and Focus data from Canon and Fujinon lens directly

5. One-time calibration

6. RS422 and directional UDP dual output

7. Auto-adjustment function of Lens delay and tracking delay, support two-point positioning

8. Full-CNC processing, Fluid Damping plate, 8+8+16x2 adjustable,

9. FREE-D protocol, compatible with Vizrt, Avid(Orad), Brainstorm, UE5, etc

10. Direction adjustable dolly

Specifications of Fluid head

1. Bowl Size:100mm

2. Payload Range:1kg-20kg

3. Counterbalance:16x2level

4. Grades of Drag: horizontal 8/vertical 8

5. Tilt Range: +90°/-80°

6. Working Height:1000mm-1640mm

7. Transport Length:1060mm

8. Temperature Range: -40°C/+60°C

9. Weight: 23.5 kg

Specifications of Data Processor Databox5

1. Support data input via encoders in pan, tilt, zoom, focus, lens and crane.

2. Automatically identify the built-in encoder of Canon or Fujinon lens and collect tracking data.

3. Support 0.1 frame precision tracking data and lens data delay adjustment function.

4. Support FREE-D data, RS422 and directional UDP simultaneous output, can simultaneously output 5-way directional UDP, and the IP address and port number of UDP can be modified.

5. Two-point positioning function.

6. Assembled with touch operation screen, UI interface parameter modification takes effect in time, support USB-C power supply and software upgrade.

Tracking Precision

Pan/ Tilt/X/Y/Z Resolution: 8,300,000/360°

Standard Configuration

1. S20VR, pan & tilt tracking head

2. PL200, quick release plate

3. Each 2 pieces of 3/8”and 1/4” screw

4. PB100, dual telescopic pan bar

5. 20pin output cable for built-in encoders of Canon/Fujinon lens

6. Data processor: Databox5

7. Pan & tilt data cables

8. Power adapter cable (Optional AC 220V input or 3.6-36V DC input)

9. PT50 pedestal system with 100 mm adapter base and barometer charger

10. Direction adjustable dolly

11. Manual pump

Features

1. Pan and tilt adopt 23 bit absolute encoder with tracking resolution of 8,300,000 / 360 °

2. Collect ZOOM and Focus data from Canon and Fujinon lens directly

3. One-time calibration

4. RS422 and directional UDP dual output

5. Auto-adjustment function of Lens delay and tracking delay, support two-point positioning

6. Full-CNC processing, Fluid Damping plate, 10+10+16x2 adjustable,

7. FREE-D protocol, compatible with Vizrt, Avid(Orad), Brainstorm, UE5, etc

Specifications of Fluid head:

1. Bowl Size:150mm

2. Payload Range:5kg-40kg

3. Counterbalance:16x2level

4. Grades of Drag:horizontal10/vertical10

5. Tilt Range: +90°/-80°

6. Working Height:1000mm-1640mm

7. Transport Length:1060mm

8. Temperature Range: -40°C/+60°C

9. Weight: 11 kg

Specifications of Data Processor Databox5

1. Support data input via encoders in pan, tilt, zoom, focus, lens and crane.

2. Automatically identify the built-in encoder of Canon or Fujinon lens and collect tracking data.

3. Support 0.1 frame precision tracking data and lens data delay adjustment function.

4. Support FREE-D data, RS422 and directional UDP simultaneous output, can simultaneously output 5-way directional UDP, and the IP address and port number of UDP can be modified.

5. Two-point positioning function.

6. Assembled with touch operation screen, UI interface parameter modification takes effect in time, support USB-C power supply and software upgrade.

Tracking Precision

Pan Resolution: 8,300,000/360°

Tilt Resolution: 8,300,000/360°

Standard Configuration

1. S40VR, pan & tilt tracking head

2. V-type quick release plate

3. Each 2 pieces of 3/8”and 1/4” screw

4. PB100, dual telescopic pan bar

5. 20pin output cable for built-in encoders of Canon/Fujinon lens

6. Data processor: Databox5

7. Pan & tilt data cables

8. Power adapter cable (Optional AC 220V input or 3.6-36V DC input)

9. AT251, single stage aluminum tripod with metal feet and mid-level spreader (or ground spreader)

10. CO100, padded bag

The SEEDER RBL08VH robotic pan & tilt head system is developed for automatic shooting of AR, VR, XR, MR or real scene in various broadcast studios, remote photography, government, education, event live and so on. Features such as anti shake technology, noise reduction technology and AI curvilinear motion technology ensure the shooting of complex motion video and meet every need of professional broadcast television studios.

The robotic pan and tilt head is equipped with zoom, focus and aperture control system, which can be adapted to video shooting of handheld camera and studio camera.

The robotic control panel can control 5 axis motion of robotic pan tilt head, zoom, focus and aperture through the network. It can control up to 8 robotics, preset 32 programs, 16 sequences per program, and 16 scenes per sequence. The system includes two sets of control systems, namely built-in and external, which can be quickly switched for use. It comes with an emergency operation button as standard. The saved movements can be triggered with just one click. or even automatically. New movements can be created within minutes and existing movements can be modified easily.

Applications

1. News, weather, thematic studio, government, education, event, etc.

2. Virtual studio and automation studio.

3. OB van, large studio, large scale activity.

4. Remote photography through network transmission.

Features

1. 10 minutes quick installation.

2. Fast start stop anti shake technology.

2. AI curvilinear motion.

3. FreeD protocol tracking data with 23-bit (8,300,000 / 360 °) tracking accuracy can be output through RS422 and directional UDP.

4. Support graphic systems such as Vizrt, Avid (Orad), Brainstorm, UE5, etc.

5. Support studio control systems such as SEEDER AISS、Vizrt MOSART、ROSS Overdrive、GrassValley IGNITE, etc.

6. The absolute encoders are used to record the motion position, one-time calibration. Tracking accuracy is <0.000043° (8,300,000/360°), and there is no accumulated error in the tracking data even after multiple power on/off cycles.

7. Standard TCP / IP network protocols, which can be controlled by third-party equipment or system to realize automatic operation.

8. IP67 protection Rating.

9. Equipped with electronic level system for rapid calibration.

Specifications

Technical Instruction

1. 5 axis motion (pan, tilt, zoom, focus and aperture)

2. Max. Payload (Pan & Tilt Head): 8kg

3. Bowl size: 100mm

4. Weight (Pan & Tilt Head): 4.6kg

5. Power: 110V/220V, 90W

6. Noise Volume: <20dB (at the maximum speed)

7. RS422 and directional UDP dual output FREE-D data, VR tracking accuracy: 0.001°

8. AI facial rigging and skeleton-based animation recognition, and low delay tracking motion shooting

9. The chassis contains independent control units that can operate without a control panel.

Movement Specifications

1. Pan range of the head: ±150°, speed: 0 - 60°/s, precision: 0.001°

2. Tilt Range of the head: ±75°, speed: 0 - 60°/s, precision: 0.001°

3. Zoom and focus: suitable for mainstream lens. Speed: 0 - 52 mm/s, precision: 0.001 mm

Standard Configuration

1. One set of robotic L-type omnidirectional pan and tilt head

2. One set of control cable

3. One set of tripod

The SEEDER RB18TS robotic telescopic crane system is developed for automatic shooting of AR, VR, XR, MR or real scene in various broadcast studios, remote photography, government, education, event live and so on. The length of the robotic telescopic jib arm is 2.5m-6.0m, which can be adjusted automatically according to the actual use environment. Adopt new type of robotic pan / tilt head and robot chassis, electronic level system is equipped as standard.

Noise volume at the the maximum speed of the system is less than 30dB, realizing all functions of the robotic crane shooting, and can be widely used for news and thematic studio program recording. Optical and dynamic collision avoidance technology makes the equipment run safety and stably. Features such as anti shake technology, AI curvilinear motion technology and one-time calibration ensure the shooting of complex motion video and meet every need of professional broadcast television studios.

The robotic control panel can control 8 axis motion of XYZ, robotic pan tilt head, zoom, focus and aperture through the network. It can control up to 8 robotics, preset 32 programs, 16 sequences, and 256 scenes. The system includes two sets of control systems, namely built-in and external, which can be quickly switched for use. It comes with an emergency operation button as standard. It allows an operator to easily create dynamic moves such as W or S without losing camera orientation. The saved movements can be triggered with just one click. or even automatically. New movements can be created within minutes and existing movements can be modified easily.

Applications

1. Automation studios and virtual studios.

2. News, weather, thematic studio, government, education, event, etc.

3. OB van, large studio, large scale activity.

4. Remote photography through network transmission.

Features

1. Anti-shake technology

2. AI curvilinear motion

3. AI auto targeting stage scene

4. Optical and dynamic dual collision avoidance technology

5. Both the head and the chassis are configured with electronic leveling systems to facilitate precise calibration for the virtual tracking system.

6. Absolute controller records motion positions and tracking data with tracking precision <0.000043° (8,300,000/360°). There is no accumulated error in the tracking data even after multiple power on/off cycles. Tracking data can set the crane length, pan/tilt calibration data, and reverse tracking data feature. The transition VR/AR system application and one-time calibration.

7. Support Canon and Fujinon full servo lenses, control zoom, focus and aperture functions, and retrieve the lens built-in tracking data. Automatic lens delay.

8. RS422 and directional UDP dual output high-precision Free-D tracking data are connected with AR, VR, XR and MR devices.

9. Standard TCP / IP network protocols that can be controlled by third-party equipment or system.

10. When the crane body and the pan/tilt head are moving and shooting at the same time, Canon and Fujinon full-servo lenses can achieve AI automatic focus tracking.

11. Modular design, no tools required for disassembly and installation, and installation can be completed in fifteen minutes.

12. The robotic master unit has a built-in operating system and 7-inch touchscreen panel, allowing it to operate independently without an external control panel.

13. Supports storage of 32 programs, 16 sequences, 256 scenes. Files can be imported and exported for backup. 15. When the jib arm and pan/tilt head move simultaneously during shooting, Canon and Fujinon full servo lenses can achieve automatic focus tracking with AI.

Technical Instruction

1. 8 axis motion (left/right & up/down & back/forth of the robotic telescopic jib, robotic pan tilt head, zoom, focus and aperture). The camera won't accumulate errors after repeated movements.

2. The automatic telescopic jib arm range is 2.5m-6.0m.

3. Payload of the Pan & Tilt Head:18kg

4. Overall Weight:350kg

5. Power:220V,400W

6. Noise Volume:<30dB

7. The up and dowm, left and right position limits of the robotic jib arm, and the pan and tilt position limits of the head can be customized.

8. Has system operation logs that allow users to view device operation records.

Movement Specifications

Pan range of the head: ±150°, speed: 0-60°/s, precision:0.001°

Tilt range of the head: ±60°, speed:0-60°/s, precision:0.001°

Pan range of the jib: ±355°, speed:0-60°/s, precision:0.001°

Tilt range of the jib:-25°-60°, speed:0-60°/s, precision:0.001°

Rang of telescopic jib arm: 2.5m-6.0m, speed:0-1m/s, precision:0.001mm

Zoom and focus: suitable for full servo lens, speed: 0-52mm/s, precision: 0.001mm

Standard Configuration

1. One set of robotic U-type omnidirectional pan and tilt head

2. One set of 2.5m-6.0m telescopic jib

3. One set of 1m-2m robot telescopic chassis

4. One set of control cable

Optional Items

Optional 1: VR output module, supports RS422 serial port and Ethernet UDP communication protocols, supports VR/AR systems using FREE-D(D1) tracking data protocol such as Vizrt, Avid(Orad), Brainstorm, UE5.

Optional 2: Control panel, enables dual system simulated camera operation, safe and reliable.

Optional 3: AI module, enables main camera HDSDI signal input for AI face and skeleton animation recognition, auto focus, achieves low latency tracking motion capture.

The SEEDER RB30SRail ceiling track robotic elevating system is developed for automatic shooting of AR, VR, XR, MR or real scene in various broadcast studios, remote photography, government, education, event live and so on. Features such as anti shake technology, noise reduction technology and AI curvilinear motion technology ensure the shooting of complex motion video and meet every need of professional broadcast television studios.

Fully integrated, highly accurate, smooth motion control in all axes. Precision engineered lifting system makes it possible to raise cameras to the heights while retaining stability and smoothness of on-air control.

Tracks design can be straight or curved, and they are available in various sizes and can be customized to achieve the required min/max length. The stainless-steel materials ensure durability and cost-effective.

The system includes two sets of control systems, namely built-in and external, which can be quickly switched for use. It comes with an emergency operation button as standard.

Applications

1. News, weather, thematic studio, government, education, event, etc.

2. Virtual studio and automation studio.

3. OB van, large studio, large scale activity.

4. Remote photography through network transmission.

Features 

1. Anti shake technology.

2. AI curvilinear motion.

3. One-time calibration       . Tracking accuracy is <0.000043° (8,300,000/360°), and there is no accumulated error in the tracking data even after multiple power on/off cycles.

4. FreeD protocol tracking data with 23 bit (8,300,000 / 360 °) tracking accuracy can be output through RS422 and directional UDP.

5. Standard TCP / IP network protocols, which can be controlled by third-party equipment or system to realize automatic operation.

6. Auto targeting stage scene.

7. Support graphic systems such as Vizrt, Avid (Orad), Brainstorm, UE5, etc.

8. Support studio control systems such as SEEDER AISS、Vizrt MOSART、ROSS Overdrive、GrassValley IGNITE, etc.

9. The system has physical limit and software limit functions, and can automatically detect obstacles within a safe distance range through an optical anti-collision detection system, automatically judge and warn, and stop movement.

Technical Instruction

1. The rail dolly can move left/right & up/down & back/forth, and the robotic head can move in pan, tilt, zoom, focus, aperture, that is, a total of 8 axis motion. They can accurately locate the movement track and adjust the movement speed, and record arbitrarily. The camera won't accumulate errors after repeated movements.

2. 3-stage hexagonal elevator / descender column, column diameter is 180-300mm; lens lifting range: 1280mm - 2080mm, precision: 0.001°.

3. Preset 32 programs, 16 sequences per program, and 16 scenes per sequence.

4. Maximum payload of the pan & tilt head is 30 kg, which is suitable for mainstream brand cameras and can be attached with small teleprompter.

5. Multi functional robot chassis is used to facilitate movement. The overall weight is about 100 kg.

6. Power: 220V, 320W

7. Noise Volume: <40dB

8. The length of single track is 1.2m, the width of single track is 0.64m, the track height is 80mm, the adjustable range of track height is 60mm, the track diameter is 32mm. Adjustable range of caster height is 15mm, and the adjustable length range of telescopic wheel is 12mm.

9. The host is equipped with Linux operating system as standard and a 7-inch control panel, which can be used to touch control for operation, safe and reliable.

10. AI facial rigging and skeleton-based animation recognition, and low delay tracking motion shooting.

11. The chassis is equipped with an electronic level system, and the chassis contains independent control units that can operate without a control panel.

Movement Specifications

Pan range of the head: ±350°, speed:0-60°/s, precision:0.001°

Tilt Range of the head: ±170°, speed:0-60°/s, precision:0.001°

Lens lifting range:1280mm-2080mm, speed:0-35cm/s, precision:0.001°

Zoom and focus: suitable for mainstream lens. Speed: 0-52mm/s, precision: 0.001mm

Robotic elevator movement: Adaptive track length, speed 0-1000 mm/s, minimum turning radius 2.5 mm

Standard Configuration

1. One set of robotic U-type omnidirectional pan and tilt head

2. One set of robotic quiet lifting platform

3. One set of robot track system (5 orbits of 1.2m straight rail or curved rail)

3. One set of control cable

The SEEDER RB30Rail rail robotic elevating system is developed for automatic shooting of AR, VR, XR, MR or real scene in various broadcast studios, remote photography, government, education, event live and so on. Features such as anti shake technology, noise reduction technology and AI curvilinear motion technology ensure the shooting of complex motion video and meet every need of professional broadcast television studios.

Fully integrated, highly accurate, smooth motion control in all axes. Precision engineered lifting system makes it possible to raise cameras to the heights while retaining stability and smoothness of on-air control.

Tracks design can be straight or curved, and they are available in various sizes and can be customized to achieve the required min/max length. The stainless-steel materials ensure durability and cost-effective.

The system includes two sets of control systems, namely built-in and external, which can be quickly switched for use. It comes with an emergency operation button as standard.

Applications

1. News, weather, thematic studio, government, education, event, etc.

2. Virtual studio and automation studio.

3. OB van, large studio, large scale activity.

4. Remote photography through network transmission.

Features 

1. Professional anti-shake technology ensures normal use of images especially during fast start and stop. The fastest speed can reach 2m/s, and there is no obvious shake at speeds below 1m/s.

2. According to the starting point position and motion time, automatically calculate the curve motion trajectory and motion acceleration/deceleration function, and can achieve smooth curve motion of 16 consecutive points.

3. One-time calibration. Tracking accuracy is <0.000043° (8,300,000/360°), and multiple on/off tracking data has no accumulated error.

4. Support Canon and Fujinon full-servo lenses, control zoom, focus and aperture functions, and retrieve built-in lens tracking data.

5. According to the automatically identified built-in tracking data delay of the lens, automatically synchronize the motor tracking delay and output the tracking data.

6. FreeD protocol tracking data with 23 bit (8,300,000 / 360 °) tracking accuracy can be output through RS422 and directional UDP.

7. Support graphic systems such as Vizrt, Avid (Orad), Brainstorm, UE5, etc.

8. Support studio control systems such as SEEDER AISS、Vizrt MOSART、ROSS Overdrive、GrassValley IGNITE, etc.

9. Standard TCP / IP network protocols, which can be controlled by third-party equipment or system to realize automatic operation.

10. The chassis is equipped with an electronic level system, and the chassis contains independent control units that can operate without a control panel.

11. Using optical anti-collision technology, the anti-collision distance can be set according to user needs. When the anti-collision system is triggered, the device can complete braking within 20mm.

12. Tracking data can set the trajectory length, pan/tilt calibration data, and tracking data orientation function.

13. Bind the camera and rendering engine, no calibration is required for outdoor virtual reality Applicationss, and it can work after power-on initialization.

14. Support importing and exporting show scene file functions.

15. Auto targeting stage scene.

Technical Instruction

1. The rail dolly can move left/right & up/down & back/forth, and the robotic head can move in pan, tilt, zoom, focus, aperture, that is, a total of 8 axis motion. They can accurately locate the movement track and adjust the movement speed, and record arbitrarily. The camera won't accumulate errors after repeated movements.

2. 3-stage hexagonal elevator / descender column, column diameter is 180-300mm; lens lifting range: 1280mm - 2080mm, precision: 0.001°.

3. Preset 32 programs, 16 sequences per program, and 16 scenes per sequence.

4. Maximum payload of the pan & tilt head is 30 kg, which is suitable for mainstream brand cameras and can be attached with small teleprompter.

5. Multi functional robot chassis is used to facilitate movement. The overall weight is about 100 kg.

6. Power: 220V, 320W

7. Noise Volume: <40dB

8. The length of single track is 1.2m, the width of single track is 0.64m, the track height is 80mm, the adjustable range of track height is 60mm, the track diameter is 32mm. Adjustable range of caster height is 15mm, and the adjustable length range of telescopic wheel is 12mm.

9. The host is equipped with Linux operating system as standard and a 7-inch control panel, which can be used to touch control for operation, safe and reliable.

Optional

1. Optional VR output module supports RS422 serial port and Ethernet UDP communication protocol, and supports graphic systems such as Vizrt, Avid (Orad), Brainstorm, and UE5 that adopt the FREE-D(D1) protocol for tracking data.

2. Optional control panel, which can simulate dual camera operation safely and reliably.

3. Optional AI module, which can realize the main camera HDSDI output signal access, AI face skeleton animation recognition, auto focus, and low latency tracking motion capture.

Movement Specifications

Pan range of the head: ±350°, speed:0-60°/s, precision:0.001°

Tilt Range of the head: ±120°, speed:0-60°/s, precision:0.001°

Lens lifting range:1280mm-2080mm, speed:0-35cm/s, precision:0.001°

Zoom and focus: suitable for mainstream lens. Speed: 0-52mm/s, precision: 0.001mm

Robotic elevator movement: Adaptive track length, speed 0-1000 mm/s, minimum turning radius 2.5 mm

Standard Configuration

1. One set of robotic U-type omnidirectional pan and tilt head

2. One set of robotic quiet lifting platform

3. One set of robot track system (5 orbits of 1.2m straight rail or curved rail)

3. One set of control cable

Design - Upgraded motor performance and algorithm

• The SMOOTH 5 has a smaller size than its predecessor but much stronger performance thanks to an upgraded motor performance and algorithm. The industry-standard 3-axis design allows movements in all angles to be amazingly smooth, even in extreme angles.


• This makes it easy to shoot in all angles switching seamlessly from portrait to landscape mode, and it mounts easily on the phones favored by mobile filmmakers like the iPhone 13 Pro MAX, Xiaomi Mi Mix Fold, Huawei Mate X2, and the Samsung Galaxy S21 Ultra thanks to its smart lock design.

Easy to use control panel - Point, click, and shoot

• Users will feel at ease thanks to the all-in-one control panel that allows them to adjust many features with only one hand without the trouble of using an app. There’s also a multifunctional control wheel that gives users perfect control over zooming and focusing.

Creative Functions - Next-generation tools for the mobile creative genius

• With the SMOOTH 5, mobile filmmakers can reach their creative peak. Some of the creative features included in the SMOOTH 5 are Magical Pano, allowing for a magnificent view in your smartphone with 180° panorama, Timelapse, where you can watch the time go by at a quicker pace to experience scenes that are used to take a longer time., and Live Stream Master, which allows for face tracking for the perfect live stream experience. Other features include SmartFollow, which automatically tracks a designated person or object, Dolly Zoom, which mimicks a Hollywood style dolly shot without the expensive equipment, and MagicClone which allows you to clone yourself and to appear in multiple parts of a scene.


• Fill light - Light up every scene with Hollywood quality lumens
  
  
  
  • During the editing process the raw footage becomes the masterwork. The SMOOTH 5 has an entire smart editing suite that allows for mobile filmmakers to do their best work yet. The ZY Cami Editor means you can wow your viewers with your work of art thanks to the ability to reverse the clip and edit it while adding filters, stickers, subtitles and background music.
  
  
  • With the SMART Mode, filmmakers can pre-program the gimbal and achieve creative perfection thanks to dozens of video templates including amazing special effects and music.
  
  
  
  
  
  
  • The SMOOTH 5 comes with a magnetic fill light that shines at 580 lumens, allowing for any scene to be perfectly lit thanks to the stepless dimming control. It also comes with color filters and can be attached to either side of the smartphone.
  
  
  • Smart Editor- Make Hollywood Magic with a few clicks
  
  
  
  

Sachtler System aktiv8T flowtech75 with Touch&Go and mid-level spreader

Weighing only 6.4 kg (14.1 lb) the aktiv8T flowtech75 system is both lightweight and durable, designed to be a long-serving and high-performing part of your kit. This system is the perfect choice for professional medium-sized camcorders and digital cine camera set ups of up to 12 kg (26.5 lbs.). 15 counterbalance steps allow for fast and precise balancing of your camera. Seven drag settings provide smooth and fast to adjust drag performance without jolts or vibrations. The illuminated PrismBubble with top or side view makes levelling easy from any height.

Buy Aktiv System aktiv8T flowtech75 MS from UBMS Dubai . We can provide best price and fast delivery for aktiv8T flowtech75 MS

Fluid Head

The aktiv8T fluid head with unique SpeedLevel™ technology can be levelled in seconds giving you time to get the perfect shot in documentary, corporate, News or Wildlife applications. The SpeedSwap™ system delivers the fastest way to switch between tripod and slider in seconds giving you ultimate flexibility.

Tripod

Capture the widest range of shots in the shortest time with aktiv8 combined with flowtech75. With no bowl clamp required, flowtech can go flat to the ground for extreme low-angle shots – using the versatile hinge lock mechanism of flowtech. The system delivers the widest height range. The 2-stage carbon fibre flowtech tripod with high torsional stiffness has unique quick release brakes which can be deployed and adjusted in an instant. Its ergonomic design makes the tripod comfortable to carry, on shoulder or carry handle, no matter where your creativity takes you. flowtech comes with a quick attach rubber foot mechanism and an adjustable mid-level spreader. When you are ready to move on, the legs are hold together by a magnetic lock for transportation.

Buy SYSTEM AKTIV8T FLOWTECH75 MS from UBMS Dubai.

JB40 kit :Professional Jib arm with T102B tripod and DL-8RB dolly . JB40 KIT includes Jib arm：JB40, Tripod：T102B, Dolly：DL-8RB, Weight Kit: WEIGHT30 KIT. As the successor to the best selling jib arm JB30, the new JB40 has been redesigned for professionals who can enjoy and appreciate a rigid, compact and lightweight jib arm. The JB40 jib arm is the ideal solution for front operations as it provides outstanding stability and flexibility to users who work with heavy cameras onsite. Simply designed for quick and easy setup, the JB40 enables even the smallest crew to effortlessly and comfortably operate the jib. Buy Libec JB40 KIT from UBMS Dubai. We can provide best price and fast delivery for all Libec products. UBMS is the authorized Libec dealer in Middle East .

Rigidity

JB40 can support weights up to 20kg and is designed to minimize wobbling or bending of the arm, resulting in smooth and stable camera shots.

High Portability

When folded and stored in its respective included carrying case, the jib arm is only about 120cm in length and easily fits in the trunk of a car. Although the jib arm only weighs 10kg, the case's shoulder strap offers extra support and reduces the burden of transportation.

Compact Design

By sliding the main arm, the jib arm becomes remarkably compact with a radius of about one meter, making it perfectly suitable for any production set including sets in tight places.

Redesigned Weight Mounting Method

By changing the weight bar's design from the former JB-30's Screw-in type to a new Plug-in type for the JB40, assembly and break down time is dramatically decreased.

3-Step Easy Setup

Connect the support arms, set the jib on the tripod, and adjust the balance. With only 3 steps, the JB40 is ready for any video production.

Compatibility

In addition to Libec's 100mm tripods, the JB40 jib arm can also be used with other brand tripods you may already own.

100mm to 75mm Conversion Adapter

A 75mm ball base fluid head can be attached by using the included adapter AD-75.

Buy LIBEC JB40 KIT PROFESSIONAL JIB ARM WITH T102B TRIPOD AND DL-8RB DOLLY from UBMS Dubai.

JB40: Successor of JB30, rigid and compact Jib Arm for front operation. As the successor to the best selling jib arm JB30, the new JB40 has been redesigned for professionals who can enjoy and appreciate a rigid, compact and lightweight jib arm. The JB40 jib arm is the ideal solution for front operations as it provides outstanding stability and flexibility to users who work with heavy cameras onsite. Simply designed for quick and easy setup, the JB40 enables even the smallest crew to effortlessly and comfortably operate the jib. Buy Libec JB40 from UBMS Dubai. We can provide best price and fast delivery for all Libec products. UBMS is the authorized Libec dealer in Middle East .

Rigidity

JB40 can support weights up to 20kg and is designed to minimize wobbling or bending of the arm, resulting in smooth and stable camera shots.

High Portability

When folded and stored in its respective included carrying case, the jib arm is only about 120cm in length and easily fits in the trunk of a car. Although the jib arm only weighs 10kg, the case's shoulder strap offers extra support and reduces the burden of transportation.

Compact Design

By sliding the main arm, the jib arm becomes remarkably compact with a radius of about one meter, making it perfectly suitable for any production set including sets in tight places.

Redesigned Weight Mounting Method

By changing the weight bar's design from the former JB-30's Screw-in type to a new Plug-in type for the JB40, assembly and break down time is dramatically decreased.

3-Step Easy Setup

Connect the support arms, set the jib on the tripod, and adjust the balance. With only 3 steps, the JB40 is ready for any video production.

Compatibility

In addition to Libec's 100mm tripods, the JB40 jib arm can also be used with other brand tripods you may already own.

100mm to 75mm Conversion Adapter

A 75mm ball base fluid head can be attached by using the included adapter AD-75.

Buy Libec JB40 Jib Arm for front operation from UBMS Dubai.

The new needs for automated image gathering, along with increasing demand for social distancing have changed the studio configuration.

The latest generation of PTZ cameras supports high-quality video production in studios, stadium, lecture halls, churches and other venues.

Cartoni has designed new practical and affordable solutions to support the PTZ cameras and safely installing and moving them on every location.

1 –Lightweight tripod

The basic solution kits tripod KT721 with adjustable mid level spreader S731/QR the new design rubber feet AT877 , the AT922 half ball 75mm camera attachment completed by  D833 lightweight dolly.

2 – Light PTZ stand

The new versatile KPTZ001 support features the 3 telescopic stage TZ001 lightweight stand complete with AT926 PTZ ball joint, the stand comes with standard rubber feet and can be installed on the D833 lightweight dolly.

 The PTZ  camera can be attached to the Ball joint with a quick release sliding plate AH921 for fast attachment and enhanced centring ability.

3 – P020 /PTZ pedestal

The Cartoni P20 pedestal gives to PTZ cameras an outstanding support allowing super high set up, a gliding vertical movement of 40 cm stroke and a super-precise travelling ability on even floors.

Equipped with a flat AH870 3/8, ¼” camera attachment the P020/ PTZ pedestal enable the PTZ camera to  be assisted by a teleprompter, making it the ideal camera for newsroom

The DJI RS 2 Pro Combo packs several additional accessories with the RS 2 gimbal to provide for a more comprehensive workflow. A key addition is the DJI Ronin RavenEye Image Transmission System, which allows for 330' 1080p video transmission from the gimbal with a latency of only 50ms for on-set collaboration. The other extra accessories are a focus motor, phone holder, two focus gears, and three HDMI cables.

DJI RS 2 pro combo isn’t just a gimbal – it is an unparalleled solution for dynamic cinematography. Every design element and feature is made to deliver industry-leading camera stabilization. Simply put, DJI RS 2 is crafted for you to master filmmaking. Buy DJI RS 2 Pro combo from UBMS.

The RS 2 gimbal is a redesigned follow-up to the Ronin-S gimbal with a payload of up to 10 lb. It's about 25% lighter and more compact thanks to monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, although still with a 12-hour runtime. The motors are about 20% more powerful and support camera and lens combinations including the Sony a7S III with a 24-70mm f/2.8 GM lens, Blackmagic Pocket 6K with a 24-70mm f/2.8 lens, Canon 1D X Mark III with a 24-70mm lens, and ALEXA Mini LF with a 35mm lens.

The RS 2 also has a 1.4" full-color LCD touchscreen that allows you to access gimbal settings as well as features such as time-lapse and hyperlapse, which were previously accessible only via the companion mobile app.

The RS 2 uses the DJI Titan stabilization algorithm to provide improved stabilization with increased smoothness. In applications with up to 100mm zoom lenses, a built-in feature called SuperSmooth complements the algorithm by compensating for micromovements and increasing torque to achieve fluid motion (an optional lens support is required).

There are also two RSA ports with electrical contacts for dedicated accessories, and each port has a NATO mount for quick release attachment of these optional accessories. One RSA port is provided on the left and one on the right side of the gimbal. Supported accessories include a focus wheel, a twist-grip dual handle, and a universal mount for efficiently attaching the gimbal to a car, jib, or slider.

The companion iOS/Android Ronin app offers many creative features in addition to standard time-lapse and panorama functions. Time Tunnel combines roll motion with hyperlapse to "twist" space and time. Track allows you to create a repeatable camera movement path for a tightly choreographed shot. Force Mobile makes the gimbal follow your smartphone's movements. Force Mobile can also be achieved with enhanced responsiveness when you use the included RavenEye transmission system. When you use the RavenEye, you can also display a live view of your subjects on the touchscreen when using the RavenEye's ActiveTrack feature.

The RS 2 uses a dual-layer Manfrotto plus Arca-Swiss camera mounting system with two removable quick release plates. For social media content, the gimbal can be adjusted at the tab of a button to position your camera into portrait mode. To let you efficiently balance your camera, the RS 2 has an axis lock on each axis, so you can unlock and balance one axis at a time. Additionally, a fine-tune balancing knob allows you to further dial in the optimal balance for your camera.

The gimbal runs for up to 12 hours on a battery cartridge that secures to the included grip handle. The cartridge can easily be swapped out for another one, sold separately. The cartridge is rechargeable via a USB Type-C port on the grip, and the grip can be totally removed from the gimbal when you need to recharge the battery. The BG30 grip is compatible with the PD and QC 2.0 charging protocols. DJI highly recommends using a 24W charger, not included. The battery supports 24W fast charging and can be fully recharged in about 1.5 hours.

The RS 2 comes with a splash-proof carry case designed with dedicated compartments for the different parts of the gimbal and key accessories. A mini tripod is also included and attaches to a 1/4"-20 thread on the bottom of the grip handle to function as a stand or an extension handle for two-handed maneuvering of the gimbal in certain scenarios.

Key Features

• RS 2 gimbal with the RavenEye 1080p transmitter, a focus motor, phone holder, two focus gears, and three HDMI cables


• 10 lb payload


• Supports larger cameras such as the Blackmagic Pocket 6K and ALEXA Mini LF


• 1.4" full-color LCD touchscreen (with access to features such as time-lapse and hyperlapse)


• DJI Titan stabilization algorithm


• SuperSmooth stabilization feature for long zoom lenses


• Two RSA ports with electrical contacts and a NATO mount for quick release attachment of dedicated accessories such as a focus wheel


• Monocoque carbon fiber axis arms


• Short grip handle with a compact 12-hour battery cartridge


• iOS 11+ / Android 7.0+ companion app


• Creative functions such as Time Tunnel and Force Mobile


• Dual-layer Manfrotto plus Arca-Swiss camera mounting system


• Single-tap switching to portrait mode


• Axis locks and fine-tune knob for efficient and precision camera balancing


• Splash-proof carry case included

Professional-level results are effortless with DJI RSC 2. This compact stabilizer for mirrorless and DSLR cameras features a foldable design and intuitive features, empowering filmmakers, one-man crews, and content creators everywhere. Buy DJI RSC 2 Gimbal Stabilizer Pro Combo from UBMS Dubai. We can provide best price & fast delivery for DJI RSC 2 pro combo

Key Faetures

• Foldable Design


• 1.2kg Weight / 3kg Tested Payload


• Quick Switch to Vertical Shooting


• 1'' OLED Screen


• Max 14hr Fast-Charge Batteries


• Titan Stabilization Algorithm

Faetures

• RSC 2 gimbal with the RavenEye 1080p transmitter, a focus motor, phone holder, two focus gears, and three HDMI cables


• Designed for mirrorless and DSLR cameras


• 6.6 lb payload for camera and accessories


• Foldable into underslung mode


• 1" OLED black-and-white display


• DJI Titan stabilization algorithm


• SuperSmooth stabilization feature for long zoom lenses


• Two NATO mounts for dedicated accessories such as a briefcase handle


• Integrated grip handle with built-in 14-hour batteries


• iOS 11+/Android 7.0+ companion app


• Time-lapse, panorama, Roll 360, and other creative functions


• Dual-layer Manfrotto plus Arca-Swiss camera mounting system


• Single-tap switching to portrait mode

Professional-level results are effortless with DJI RSC 2. This compact stabilizer for mirrorless and DSLR cameras features a foldable design and intuitive features, empowering filmmakers, one-man crews, and content creators everywhere. Buy DJI RSC 2 from UBMS Dubai. We can provide best price and fast delivery for DJI RSC 2.

Key Features

• Foldable Design


• 1.2kg Weight / 3kg Tested Payload


• Quick Switch to Vertical Shooting


• 1'' OLED Screen


• Max 14hr Fast-Charge Batteries


• Titan Stabilization Algorithm

DJI RSC 2’s foldable design means easy transportation and storage, along with expanded shooting options.

Get creative with RSC 2’s six configurations, delivering versatility that simplifies even the most complex shots.

When folded, RSC 2 is just 7 × 7.5 inches, making it as portable as it is powerful.

No one makes camera stabilizers like DJI. Our Titan Stabilization Algorithm captures smoother footage than ever. Need more? SuperSmooth mode compensates for micromovements and increases torque, stabilizing even 100mm zoom lenses.

The DJI RSC 2 is designed for mirrorless and DSLR cameras and supports up to 6.6 lb camera and accessories loads. The motors of the RSC 2 are 50% more powerful than those of the Ronin-SC, which is the predecessor of this redesigned gimbal. A key feature of the RSC 2 is a foldable design that allows for switching to underslung mode.

The gimbal head folds down from the gimbal handle, and you can then flip the gimbal around and use it underslung for low-angle shots, without having to attach or detach anything. The gimbal handle remains built-in and has built-in batteries that provide up to a 14-hour runtime. The batteries can be charged via the handle while the gimbal is being used in operation (except in extreme high/low temperatures). The handle supports PD and QC 2.0 fast-charging protocols and can be recharged in approximately two hours using an 18W fast charger, not included. The foldable design of the gimbal also allows for easier transport and storage.

The RSC 2 also features a 1" OLED black-and-white screen and has a horizontal dial on the front for focus adjustments with the same hand you hold the gimbal with. On each side of the gimbal handle is a NATO mount with M4 threads for attaching dedicated accessories such as an optional briefcase handle.

The RSC 2 uses the DJI Titan stabilization algorithm, an improved version over their previous one that provides better stabilization and fluidity. There's also a built-in feature called SuperSmooth that complements the algorithm when working with up to 100mm zoom lenses. SuperSmooth compensates for micromovements and increases torque to achieve smooth motion with long lenses.

The gimbal has a dual-layer Manfrotto plus Arca-Swiss camera mounting system with two removable quick release plates. For social media content, a tap of a button positions your camera into portrait mode. The RSC 2 allows a total of six different configurations and comes with a companion iOS/Android app that provides access to features such as time-lapse, panorama, and Roll 360, which rotates your camera continuously along the roll axis. The gimbal also supports the optional DJI RavenEye transmission system, which allows for remote 1080p video transmission, ActiveTrack 3.0 subject tracking from the gimbal, and other functions.

A mini tripod is included with the RSC 2 that attaches to a 1/4"-20 thread on the bottom of the grip handle to function as a stand or an extension handle for two-handed maneuvering of the gimbal for certain shots. Camera control cables are also included that allow for control of select cameras and functions directly from the gimbal controls.

Key Features

• Designed for mirrorless and DSLR cameras


• 6.6 lb payload for camera and accessories


• Foldable into underslung mode


• 1" OLED black-and-white display


• DJI Titan stabilization algorithm


• SuperSmooth stabilization feature for long zoom lenses


• Two NATO mounts for dedicated accessories such as a briefcase handle


• Support for an optional DJI RavenEye 1080p transmission system


• Integrated grip handle with built-in 14-hour batteries


• iOS 11+/Android 7.0+ companion app


• Time-lapse, panorama, Roll 360, and other creative functions


• Dual-layer Manfrotto plus Arca-Swiss camera mounting system


• Single-tap switching to portrait mode

DJI Ronin-S2 is the successor of DJI Ronin-S. Ronin-S2 is designed for use with DSLR and mirrorless cameras. DJI RS 2 isn’t just a gimbal – it is an unparalleled solution for dynamic cinematography. Every design element and feature is made to deliver industry-leading camera stabilization. Simply put, DJI RS 2 is crafted for you to master filmmaking. Buy Dji Ronin s2 from UBMS Dubai . We can provide best price and fast delivery for DJI RS 2.

Monocoque carbon fiber construction adds incredible strength and unbelievable lightness to the axis arms.

A 1kg (2.3lbs) gimbal with 4.5kg (10lbs) tested payload offers the highest weight-to-payload ratio in the industry.

Access ActiveTrack 3.0 right from the touchscreen, freeing your creative control.

The full-color LCD screen allows you to quickly adjust parameters and access Ronin app features.

No one makes camera stabilizers like DJI. Our Titan Stabilization Algorithm captures smoother footage than ever. Need more? SuperSmooth mode compensates for micromovements and increases torque, stabilizing even 100mm zoom lenses

While DJI RS 2 is optimized for capturing unique shots with a single hand, it is also designed to be a professional filmmaking solution. No matter how complex your shot, DJI RS 2 adapts to achieve your vision.

Both RSA ports are NATO-compatible, opening DJI RS 2 to a universe of third-party accessories along with versatile handling and mounting possibilities.

The DJI RS 2 is a redesigned follow-up to the Ronin-S gimbal with a payload of up to 10 lb. It's about 25% lighter and more compact thanks to monocoque carbon fiber axis arms and a shorter grip handle with a smaller battery cartridge, although still with a 12-hour runtime. The motors are about 20% more powerful and support camera and lens combinations including the Sony a7S III with a 24-70mm f/2.8 GM lens, Blackmagic Pocket 6K with a 24-70mm f/2.8 lens, Canon 1D X Mark III with a 24-70mm lens, and ALEXA Mini LF with a 35mm lens.

The RS 2 also has a 1.4" full-color LCD touchscreen that allows you to access gimbal settings as well as features such as time-lapse and hyperlapse, which were previously accessible only via the companion mobile app.

The RS 2 uses the DJI Titan stabilization algorithm to provide improved stabilization with increased smoothness. In applications with up to 100mm zoom lenses, a built-in feature called SuperSmooth complements the algorithm by compensating for micromovements and increasing torque to achieve fluid motion (an optional lens support is required).

There are also two RSA ports with electrical contacts for dedicated accessories, and each port has a NATO mount for quick release attachment of these optional accessories. One RSA port is provided on the left and one on the right side of the gimbal. Supported accessories include a focus wheel, a twist-grip dual handle, and a universal mount for efficiently attaching the gimbal to a car, jib, or slider.

The companion iOS/Android Ronin app offers many creative features in addition to standard time-lapse and panorama functions. Time Tunnel combines roll motion with hyperlapse to "twist" space and time. Track allows you to create a repeatable camera movement path for a tightly choreographed shot. Force Mobile makes the gimbal follow your smartphone's movements. Force Mobile can also be achieved with enhanced responsiveness when you use the optional DJI RavenEye 1080p transmission system. As mentioned, many of these features can be accessed from the touchscreen LCD of the RS 2. When you use the optional RavenEye system, you can also display a live view of your subjects on the touchscreen when using the RavenEye's ActiveTrack feature.

The RS 2 uses a dual-layer Manfrotto plus Arca-Swiss camera mounting system with two removable quick release plates. For social media content, the gimbal can be adjusted at the tab of a button to position your camera into portrait mode. To let you efficiently balance your camera, the RS 2 has an axis lock on each axis, so you can unlock and balance one axis at a time. Additionally, a fine-tune balancing knob allows you to further dial in the optimal balance for your camera.

The gimbal runs for up to 12 hours on a battery cartridge that secures to the included grip handle. The cartridge can easily be swapped out for another one, sold separately. The cartridge is rechargeable via a USB Type-C port on the grip, and the grip can be totally removed from the gimbal when you need to recharge the battery. The BG30 grip is compatible with the PD and QC 2.0 charging protocols. DJI highly recommends using a 24W charger, not included. The battery supports 24W fast charging and can be fully recharged in about 1.5 hours.

The RS 2 comes with a splash-proof carry case designed with dedicated compartments for the different parts of the gimbal and key accessories. A mini tripod is also included and attaches to a 1/4"-20 thread on the bottom of the grip handle to function as a stand or an extension handle for two-handed maneuvering of the gimbal in certain scenarios.

• 10 lb payload


• Supports larger cameras such as the Blackmagic Pocket 6K and ALEXA Mini LF


• 1.4" full-color LCD touchscreen (with access to features such as time-lapse and hyperlapse)


• DJI Titan stabilization algorithm


• SuperSmooth stabilization feature for long zoom lenses


• Two RSA ports with electrical contacts and a NATO mount for quick release attachment of dedicated accessories such as a focus wheel


• Support for an optional DJI RavenEye 1080p transmission system


• Monocoque carbon fiber axis arms


• Short grip handle with a compact 12-hour battery cartridge


• iOS 11+ / Android 7.0+ companion app


• Creative functions such as Time Tunnel and Force Mobile


• Dual-layer Manfrotto plus Arca-Swiss camera mounting system


• Single-tap switching to portrait mode


• Axis locks and fine-tune knob for efficient and precision camera balancing