SFP-H-7 Series
SFP-H-7 Series
SFP-317-H-7 series supports 3G SMPTE ST 2110 signals across 10 GigE and it features 2x 10 GbE SFP+ cages complying with SMPTE ST 2022-7
- Supports ST-2022-7
- Ember+ control system compliant
- Decode ST-2110 and ST-2022
- IP – 10G/s SFP+
- Fiber – 3Gb/s SFP
- Coaxial SFP 3Gb/s
- Direct BNC 3Gb/s I/O
SFP-H-7 is the ONLY monitor series in the market that can support 3G SMPTE ST 2110 signals across 10 GigE and it features 2x 10 GbE SFP+ cages complying with SMPTE ST 2022-7, providing redundancy protection for critical distribution and monitoring applications “hitless switching”.
SFP-H-7 monitor series offers Ember+ compliant control system capabilities, i.e. can be controlled by Lawo-VSM, BFE-Core or any other Ember+ compliant control system.
Additional information
Related Products:
BVM series – BVM-HX310
GLIM
MediaCento HDMI-over-IP
UReady 1U Dual Display
JVC CL-S600 6 Mega Pixel 30″...
Actus – MVPD Remote Video Monitoring
Social Media Live Stream Recorder
SFP-H-7 Series
PBM-224-4K-Dual
PBM-4K Series.
PBM-4K-H
MonitorIQ
Helm
TeleSight
LMD series- LMD-A220
Features include: Lightweight and slim full HD (1920 x 1080), excellent cost-performance ratio, stylish lightweight and slim body with industry’s widest viewing angle, HDR and 4K production, shopping channels feature, enhanced field application, graphics applications, Latest camera-linkage functions, Editing features, User pre-sets and password protection, 2K format display and dual-link HD-SDI mode, and multiple monitors firmware upgrade utility
';
LMD series- LMD-A170
Features include: Lightweight and slim full HD (1920 x 1080), excellent cost-performance ratio, stylish lightweight and slim body with industry’s widest viewing angle, HDR and 4K production, shopping channels, enhanced field application, graphics applications, Latest camera-linkage functions, editing features, user presets and password protection, 2K format display and dual-link HD-SDI mode, and multiple monitors firmware upgrade utility
';
BVM series – BVM-HX310
';
GLIM
Supporting television production and media distribution while teams work remotely brings with it many challenges. A primary challenge with remote work is the ability to see, hear, and understand the technical properties of your media library from afar. At Telestream, we call this media file opaqueness. GLIM was built to solve well known remote work challenges: be a vastly superior experience to the ‘remote desktop/virtual desktop’ playback experience, and to prevent remote employees wasting hours every day downloading mezzanine grade media files. Solving these two challenges significantly reduces the aforementioned media file opaqueness, and ultimately increases productivity. GLIM is a groundbreaking technology that allows users to remotely play mezzanine/professional-grade media files in a web browser. The GLIM engine is built upon our Switch playback and inspection technology and will allow for remote playback of any container/ codec/resolution/fps/audio channel/color space combination in a web browser (Windows or Mac OS and Google Chrome v80+).
';
MediaCento HDMI-over-IP
The MediaCento IPX IP-based audio/video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI HD/4K UHD video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load. Transmitters and receivers install directly into your existing LAN infrastructure. There’s no need to configure any IP settings or run expensive dedicated links from a back room. Better yet, PoE power eliminates the need for external power supplies.
Use the standalone MediaCento IPX Controller with any network switch for full flexibility including dual network, matrix switching, and video wall support, up to 8 x 8 (64 screens).
';
BM-245-NDI
› 23.8-inch 1920×1080 QLED Panel
› 100% DCI-P3 wide color gamut coverage
› VICO 1.97 A-class Eye Protecting Panel
› High bandwidth 4K NDI® monitoring
› 3GSDI 2-in 1-loop, HDMI®2.0 input
› NDI® decode to 3GSDI output
› NDI®/SDI/HDMI® PBP or PIP view
› Auto detect and quick select NDI® sources
› Support NDI® Discover Server
› Rec 709 / DCI-P3 / Rec 2020 color gamut selection
› 3DLUT Auto Self-calibration without PC
› Built-in Delog LUTs and User LUTs upload by USB
› Waveform / Vector / Histogram
› Focus assist / False color / Zebra
› 16-ch audio meters / Lissajous pattern
› IP webserver remote control (Future update)
› AC, DC and battery plate power
';
UReady 1U Dual Display
';
H-E Analyzers
Analyzer OTT Head-End is designed for deployment in the head-end for assurance of adaptive bitrate streaming services. Its in-depth analysis provides assurance of all levels of the ABR stack: availability of the service, manifest correctness, segment availability, and correctness, as well as the video/audio quality.
The Analyzer OTT Head-End provides at a glance insight into the current and past service performance, detecting issues in IP connectivity and configuration, packetizes, and transcoders. It also supports the leading streaming protocols such as MPEG-DASH, HLS, MS Smooth Streaming, and HDS and validates manifest as well as segments.
With the full stack analysis capabilities of the Analyzer Flex, head-end teams get real-time insights in all parts of the service: from input stream integrity, video and audio content quality, as well as ad-insert and other metadata validation. Analyzer Flex is software-based and can be run in a virtual environment. Efficient management configuration via CLI is possible. Multiple Ethernet interfaces (1/10 GbE), as well as ASI and DVB-S/S2/T/T2C/C2 input cards, are supported.
The Agama Analyzer Flex can-do real-time analysis of up to 1000 streams at a time on IP, RTP, TS and elementary stream level. For detection of black screens, macro blocking, freeze frames and audio silence, the Analyzer supports content level analysis. The Analyzer can do syntax analysis on the following formats: HEVC, AVC, MPEG-2 video, AAC, MPEG-2 Audio and AC-3. All TR290 P1-P3 parameters are available.
The Agama Analyzers have a powerful visualization with dashboards, timelines, and event logs where it is easy to detect errors and drill down to the root cause.
';
JVC CL-S600 6 Mega Pixel 30″ Color Monitor
.
6MP for multi modality diagnosis: Providing optimal functions for diagnostic viewing such as DR, CT, MRI and pathology, CL-S600 with seamless and wide screen improves your workflow efficiency while reducing eye strain and ensuring space and energy saving. Buy JVC CL-S600 from UBMS Medical.
Dynamic gamma: Color images automatically recognized to provide optimized contrast, brightness and gamma. No user interventions is required Improved visibility: The Turbo Luminance function can boost the brightness and contrast to maximum for 30s to magnify identifiable grayscale gradations, contributing to finding out low contrast lesions. Focus on details: Using Visual Point Mode, you can focus on the detail where you want to see. It can also be used in combination with the Turbo Luminance funcition. Advanced features :
- Reading Light
- LED Indicator / Front Buttons
- Built-in Sensor
- Space saving
- Wire management / DisplayPort Daisy Chains
- DICOM conformance check
نقدم لكم الشاشة الملونة الجديدة JVC CL-S600 6 ميجا بكسل 30 بوصة . توفير الوظائف المثلى للمشاهدة التشخيصية مثل DR و CT و MRI وعلم الأمراض ، يعمل CL-S600 مع شاشة سلسة وعريضة على تحسين كفاءة سير العمل مع تقليل إجهاد العين وضمان المساحة وتوفير الطاقة. اشترِ JVC CL-S600 من UBMS Medical.
';
Web-based Monitoring
Now more than ever it is important for broadcasters and service providers to have secure, remote access to their playout environment, and when your system comprises multiple channels and even several playout sites, it becomes critical.
Having an overview of any upcoming issues across the entire system is essential so you can react quickly without needing multiple operators to take action.
';
Actus – MVPD Remote Video Monitoring
Actus RVM provides MVPDs with an organized dashboard that provides constant compliance-logging and quality monitoring for higher-value channels with the ability to dial in to their entire lineup at hundreds of geographically dispersed locations to see what their viewers see Post-STB and troubleshoot issues in real time.
It is also used to verify local ads are inserted and timed correctly, and ensure services are running properly.
RVM provides Penalty Box and traditional Multiviewer views and sends proactive alerts 24x7 for channels that violate user-set quality thresholds.
BY IDENTIFYING ISSUES BEFORE THEIR CUSTOMERS, REMOTELY TROUBLESHOOTING THEM, AND QUICKLY REMEDYING THEM, OPERATORS REDUCE TRUCK-ROLLS, SAVE MONEY, AND IMPROVE THEIR PERFORMANCE AND SERVICE.
';
RMTF-170-3G
The RMTF-170-3G – with Table Top (TT) or Rack Mount (RM) options – monitors set a new standard in LCD monitors for broadcast and professional video applications. They provide a 17″, 10 bit, 1920 x 1080 resolution, 16:9 format, anti-glare IPS LCD screen. All video formats are scaled to fit on the screen in the highest quality using 12 bit digital processing, precision scaling, and gamma correction to produce the best images possible. When used outdoors, an optional Sun Shade (part number 829201) is available for the RMTF-170-3G-TT tabletop monitor. A standard XLR-4F connector can plug into the XLR-4M connector to supply 11 to 17 VDC at 3A to the product as an alternative to AC power.
This light and nimble monitor comes with a plethora of in-monitor display features including IMD, Tally, timecode, in-screen audio level metering, format display, and area/title safe markers.
The RMTF also provides a host of audio tools including 16-channel level metering and built-in speaker monitoring of its dual stereo analog inputs or SDI embedded audio. Stand or rack-mount configurations available.
https://www.wohler.com/product/video-monitoring/rmtf-170-3g/
';
RM Range
The RM Series is a full-featured range of slim, in-rack video monitors ideal for mobile trucks, news and transmission control rooms, production/post-production and video surveillance applications. These tilting monitors come standard with in-monitor level metering, selectable video waveform/vectorscope/histogram, safe area and aspect ratio markers, IMD labeling, tally, and built-in color bars, as well as a variety of picture controls and assistive video features such as zoom controls and focus assist.
All standard frame rates and resolutions are supported from 3G-SDI, HDMI or Analog input sources and each input has a looping output. Up to 16 audio channels may be selected for visual monitoring using on-screen bar graph style level meters. Monitoring speakers to the rear of the unit allow the selected screen to be audibly monitored, while a 3.5mm headphone socket provides optional private monitoring.
Each of the high-resolution LCD screens displays high-definition or standard-definition video in a range of aspect ratios. Parameters are selected and adjusted using an on-screen display menu.
';
KUM-3110S (4K)
';
KUM-3120S (8K)
';
KUM-1820D( P3|1000nits )
';
BM-215-NDI
› 21.5-inch 1920×1080 QLED Panel
› 100% DCI-P3 wide color gamut coverage
› VICO 1.97 A-class Eye Protecting Panel
› High bandwidth 4K NDI® monitoring
› 3GSDI 2-in 1-loop, HDMI2.0 input
› NDI® decode to 3GSDI output
› NDI®/SDI/HDMI PBP or PIP view
› Auto detect and quick select NDI® sources
› Support NDI® Discover Server
› Rec 709 / DCI-P3 / Rec 2020 color gamut selection
› 3DLUT Auto Self-calibration without PC
› Built-in Delog LUTs and User LUTs upload by USB
› Waveform / Vector / Histogram
› Focus assist / False color / Zebra
› 16-ch audio meters / Lissajous pattern
› IP webserver remote control (Future update)
› AC, DC and battery plate power
';
MCX AV over IP Distribution and Control
MCX is a next-generation 4K60 AV-over-IP distribution solution that enables latency-free extension and matrix switching of video, audio, RS-232, and USB 2.0 signals. MCX features built-in video wall management and is TAA-compliant.
MCX allows AV and data payloads to exist on the same IT network and reduces network management time and costs.
The encoders/decoders are ideal for point-to-point secure video conferencing, multi-monitor broadcasts, distributed video matrix or video wall systems, and remote KVM system control.
Easy Setup – Easy Management
Connect each encoder to an AV source (e.g. computer, content player) and connect it to a managed 10-GbE network switch. Connect a decoder to each screen you want to display the content on and connect it to the same switch. Manage your MCX system through the user-friendly MCX Gen2 Network Manager that helps you to configure your system and even build and manage a video wall.
Uncompressed 4K 60 Hz 4:4:4 Video
MCX delivers the video quality high-end AV applications require to display eye-catching content: It extends uncompressed 4K 60 Hz 4:4:4 video to an unlimited number of displays without sacrificing latency, video quality or bandwidth. Even better, it supports up to 10-bit HDR using Software-Defined Video over Ethernet (SDVoE) – the latest software-based AV-over-IP platform for extension and control of AV systems on Ethernet or fiber networks.
Create Ergonomic Workflows for Operators
This video extension system is easy to install and use on a modern network. The units’ front-panel configuration buttons and On-Screen Display (OSD) streamline daily workflows.
Choose Copper or Fiber Versions to Suit Your Application
The encoders/decoders are designed for high-quality, IP routable, AV extension with minimum latency. Fiber and copper versions are available to accommodate for your preferred network infrastructure.
Zero Latency
This robust video distribution system's data transfer delay is virtually undistinguishable; the glass-to-glass encoding and decoding happens in real-time (0.03 milliseconds). This means you never deal with annoying lag or video delay.
HDMI 2.0 and DisplayPort Encoding and Decoding
You can connect every essential device to your MCX Gen2 through its variety of ports. Multiple control and data signals may also be transmitted along with the audio and video, including IR and RS-232.
3-Port USB with USB-C Connectivity
The integrated USB hub of each decoder (receiver) can be configured to be in ‘USB Host’ or ‘Device Mode’ and can function as a simple point to point AV/KVM extension, freely routed between any two endpoints, or it can be configured into a special “Simultaneous” mode, allowing up to 7 ‘Host Mode’ units to extend their USB ports to a single ‘Device Mode’ unit. This type of USB AV/KVM routing flexibility enables a wide range of multi-user, control room, or on-demand installation scenarios.
Additional Video Out
The system can show the input source on a separate monitor. For example, in a live event, the user can view the source and sample that video on a loop, then pass it down to the network to compare latency.
Works with MCX Gen2 Controller
Combined with the optional MCX Gen2 Controller or control software, the functionality of the encoders/decoders expands exponentially. Multiple encoders/decoders may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations.
';
PBM-324-4K
24″ 1000 nit 4K – UHD panel with TRUE HDR (High Dynamic Range) capabilities !.
PBM-324-4K supports up to 4096 x 2160 resolutions, focuses on delivering the highly detailed, accurate color representation and stunning picture consistency that high-end production applications require.
PBM-4K monitor series supports ST-2082, ST-2110, ST-2022 and other earlier industry standards, 2 x 12G/3G/HD/SD-SDI or 1 x Quad 3G-SDI (2SI / SQ) inputs with active loop, 2 x SFP+ inputs & HDMI 2.0.
The PBM-4K series offers Ember+ compliant control system capabilities, i.e. can be controlled by Lawo-VSM, BFE-Core or any other Ember+ compliant control system.
PBM-4K series offers HDR Display capabilities supporting PQ (ST-2084) & HGL standards. The PBM-4K series also adopts the exceptionally slim form factor that Plura customers enjoy, ensuring that even the largest 4K monitors in the portfolio demand a modest slice of real estate.
';
TV Rating Analyzer
Visualise your broadcast audience and turn your viewing statistics into monetary assets easily with XENTAURIX TV Rating Analyzer for broadcasters, media monitoring or advertising agencies. Understanding polling TV statistics from GFK, Nielsen, Gallup, TNS, etc. and how these relate to your broadcast audience is a challenge, especially with flat text import data, non-visual cues and no visual relation to real-time aired programming requires imagination and educated guess work.
View and analyze audience trends XENTAURIX Rating Analyzer releases your polling data (GFK, Nielsen, Gallup, TNS, etc.) cross referencing broadcast programming from all stations and provides graphical representations in ‘true-time’ of what actually happened with your audience. Easily understand your audience viewing trends, did they turn-off or switch over? What age range and demographics were watching? How effective was an advertisers advert? How many viewers were watching?
Monetising and understanding your audience is now easy with XENTAURIX Rating Analyzer. Compare broadcast channels side-by-side with actual broadcast content in ‘true-time’ and easily build visual trending data to share with your advertisers, producers and programme editors to maximise advertising revenue and audience viewership.
Multifunctional Report, individual layouts
In addition to the quota the XentauriX Rating Analyzer also records all TV programs. This means you can analyse why viewers switched over and which influence ads had on the viewer ratings. The user interface is individually adjustable to the user or user groups. You can easily assign several player windows to the TV channels. Every analysis tool can be positioned freely and adjusted in size and background colour.
Benefits:
- Monetise your audience with ‘true-time’ advertising statistics
- Easily extract, visualize and produce ‘true-time’ visual graphs
- Perform competitive analysis in ‘true-time’ side-by-side
- Store 30+ days programming complete with all metadata (EPG, CC, DVB-Text)
- 24/7 ‘never-fail’ configuration records every broadcast second
- Scalable to any number of channels – 1 to 1,000+
- Supports HD-SDI, IP, DVB and data-stream sources
- H.264 codecs for exceptional quality
Contact us today:
web: https://www.xentaurix.com/en/contact/
e-mail: office@artec.de
';
Social Media Live Stream Recorder
Social media platforms such as Twitch, YouTube, Facebook, Instagram Stories . are increasingly being used for live streaming of interactive content. The importance for video marketing is immense, especially since the prompt response to user comments increases the popularity of livestreams many times over compared to video-on-demand. The analysis of social media content is therefore of great importance for companies and from the fields of media monitoring and market research.
The XENTAURIX Media and Broadcast Logger or the XENTAURIX Cloud Service platform are used for monitoring, recording and analysing social media livestreams. The XENTAURIX Logger System detects livestreams and starts the recording automatically. With the instant replay function of the XENTAURIX HTML5 dashboard, clients can navigate between live and recorded streams to directly create and forward video clips and SnapShots.
Contact us today:
web: https://www.xentaurix.com/en/contact/
e-mail: office@artec.de
';
TV Logic
OLED & LCD
4K, HDR
Grade 1 & Display
PHASE -Serving the Brazilian Television Marker Successfully Since 1980
';
SFP-H-7 Series
SFP-317-H-7 series supports 3G SMPTE ST 2110 signals across 10 GigE and it features 2x 10 GbE SFP+ cages complying with SMPTE ST 2022-7
- Supports ST-2022-7
- Ember+ control system compliant
- Decode ST-2110 and ST-2022
- IP – 10G/s SFP+
- Fiber – 3Gb/s SFP
- Coaxial SFP 3Gb/s
- Direct BNC 3Gb/s I/O
SFP-H-7 is the ONLY monitor series in the market that can support 3G SMPTE ST 2110 signals across 10 GigE and it features 2x 10 GbE SFP+ cages complying with SMPTE ST 2022-7, providing redundancy protection for critical distribution and monitoring applications “hitless switching”.
SFP-H-7 monitor series offers Ember+ compliant control system capabilities, i.e. can be controlled by Lawo-VSM, BFE-Core or any other Ember+ compliant control system.
';
PBM-224-4K-Dual
PBM-224-4K-Dual customized system was designed specifically to retrofit current HD/SD OB trucks with UHD system. Replacing aging HD/SD monitors with the new PBM-224-4K-Dual which is a great space management solution for the entire video wall. It is also ideal solution for many video & computer workstation applications such as video editing systems or alike.PBM-224-4K, Dual 24″ monitor supports up to 4096 x 2160 resolutions, ST-2082, ST-2110, ST-2022 and other earlier industry standards, 4 x 12G/3G/HD/SD-SDI inputs with active loop, 4 x SFP+ inputs & HDMI 2.0. In addition, HDR Display capabilities supporting PQ (ST-2084) & HGL standards.
The PBM-4K series offers Ember+ compliant control system capabilities, i.e. can be controlled by Lawo-VSM, BFE-Core or any other Ember+ compliant control system.The PBM-4K series also adopts the exceptionally slim form factor that Plura customers enjoy, ensuring that even the largest 4K monitors in the portfolio demand a modest slice of real estate.
';
PBM-4K Series.
The PBM-4K series offers Ember+ compliant control system capabilities, i.e. can be controlled by Lawo-VSM, BFE-Core or any other Ember+ compliant control system.
PBM-4K monitor series supports ST-2082, ST-2110, ST-2022 and other earlier industry standards, 2 x 12G/3G/HD/SD-SDI or 1 x Quad 3G-SDI (2SI / SQ) inputs with active loop, 2 x SFP+ inputs & HDMI 2.0.
PBM-4K series offers HDR Display capabilities supporting PQ (ST-2084) & HGL standards. The PBM-4K series also adopts the exceptionally slim form factor that Plura customers enjoy, ensuring that even the largest 4K monitors in the portfolio demand a modest slice of real estate.
';
PBM-4K-H
';
MediaServicesIQ
Media ServicesIQ provides an easy-to-access portal to cloud-based AI/ML services through custom-developed workflows.
KEY FEATURES & CAPABILITIES
Metadata Generation
Cloud-based collection of speech-to-text and video intelligence applications automating the generation of speech and video-based metadata Provides off-the-shelf integration with the Avid system Easily interfaces with existing workflows using REST API Video intelligence metadata for face, logo, ad, number, on-screen text, object, and shot change detection Metadata with timecodes for tagging, enabling search and faster content retrieval.
Automatic Closed Caption/Subtitle Generation
Machine-generated, time-synced outputs in various sidecar formats for further processing Faster, scalable, reliable, and secure generation of preliminary outputs Easily ingest sidecar files into workflows for repurposing.
CC Quality Conformance for Multi-Platform publishing
Generate reports on non-conformance parameters within a CC sidecar file Automatically compares against predefined style guides standards from platforms such as Netflix Time coded error reports for easy navigation and correction Ability to ingest multiple sidecar formats.
Auto classify content for better value
Automatically create a classification for content Classify advertisements using various labels to automatically identify and ingest Automatic classification of high-points in a feature-length video Easily integrate and ingest labels into existing workflows.
';
MonitorIQ
Equipped with the technological power of AI, Digital Nirvana’s MonitorIQ 7.0 provides new capabilities for compliance logging and monitoring. Known as the industry’s most reliable, secure, and easy-to-use broadcast monitoring and compliance logging platform that allows operators to record, store, monitor, analyze, and repurpose content quickly and efficiently with a minimum of clicks. MonitorIQ enables broadcasters to collect and use knowledge about their broadcast content to meet a wide range of regulatory and compliance requirements. Version 7 of the Digital Nirvana platform gives broadcasters access to valuable next-generation content processing and analysis tools.
';
Dejero CuePoint
Dejero CuePoint return video servers send low-latency, live program video and teleprompter feeds to on-air presenters, camera operators, and other production personnel in the field to help them stay synchronized with central production during live broadcasts.
';
Helm
Helm, allows the design of a control system dedicated to your operators’ requirements; there’s no clutter of unnecessary controls or information and no risk of confusion between channels as you switch from one manufacturer UI to another. There’s no hunting for the right buttons to press. We can help you design and implement Helm control panels, and you’ll have all the tools to modify and extend them as your requirements change.
BENEFITS
- Totally customisable: All the control you need, none that you don’t
- Smaller footprint: Not all environments have room for multiple hardware panels
- Lower cost: Helm panels run on entry-level PCs, or even on mobile devices via WebCentre
- Faster training: Only one system to learn for new operators
- Enhanced productivity: Simpler interfaces mean operators can work faster and more effectively
- Extend and replace: You can add or change equipment in the facility without impacting operators.
';
TeleSight
TeleSight allows operators to monitor and analyze their video services with confidence. It offers real-time decode, display, and stream analysis, including TR-101-290, video black and freeze, video codec conformance, and audio level tests. Its multiviewer display is highly configurable with on-screen alarms and notifications.
';
SFP-H Series
SFP-H is the NEW FUTURE PROOF Hybrid Monitor Series, supporting Coax, Fiber & IP connectivity.
The SFP-H monitor series will be available in multiple sizes starting from 17” all the way to 84”.
The SFP-H is integrated with powerful H/W & S/W platforms to support Coaxial 3Gb/s BNC I/O connectivity, Coaxial SFP I/O connectivity, IP SFP+ over Fiber decoding "ST-2110 & ST-2022" with Third-Party H/W decoder and the NEW PIPM "Plura Software Stack IP Platform" decoder.
SFP-H monitor series that can decode ST-2110, ST-2022, PTP and ASPEN IP streams with PIPM "Plura Software Stack IP Platform" based on a powerful computing core and utilizing standard 10G/s SFP+ module.
';
Atomos Sumo19
With its large, bright color-accurate 19\" LCD screen and 4K recording capabilities, the Atomos Sumo can be implemented to enhance professional video workflows in both production and post-production. On set, the Sumo\'s HDR capabilities enable cinematographers to realize more of a cinema camera\'s dynamic range when shooting in log or raw formats. All the built-in monitoring tools are also compatible with the HDR rendering, updating to accommodate the larger dynamic range. Additionally, the Sumo can record incoming DCI and UHD 4K video in various flavors of Apple ProRes or AVID DNxHR to Master Caddy II storage media. With supported cameras, ProRes Raw/Raw HQ recording is also possible, for more flexibility in post-production.
';
Atomos Shogun Inferno
';
Atomos Ninja V
The Atomos Ninja V is a 5" on-camera monitor/recorder that records and plays back DCI 4K, UHD 4K, and HD video from purpose-built mini-SSDs. It features a 10-bit FRC IPS screen with a brightness of 1000 cd/m², which makes it suitable for use in both exterior and interior conditions. The AtomHDR display technology allows you to accurately monitor your log gamma footage without having to view flat, washed-out looking images or use a LUT to compress the dynamic range and color space. The monitor supports popular log formats from Sony, Canon, Panasonic, ARRI, RED, and JVC cameras. The settings only affect viewing, with recorded video remaining unaltered.
';
Atomos Ninja Inferno
';