Atomos AtomX Modules
Atomos AtomX Modules
The AtomX Ethernet/NDI Expansion Module for Ninja V from Atomos provides a GigE connector supporting NDI input and output with encode, decode, control, and sync capability, allowing you to transmit, distribute, or receive and monitor NDI from any NDI source. The module connects to the Ninja V\’s AtomX expansion port. After it\’s attached, it also becomes the Ninja\’s battery plate. It accepts the Ninja\’s battery, which then powers both devices at the same time.
The AtomX SYNC Expansion Module for Ninja V from Atomos adds wireless timecode, sync, and Bluetooth control to the Ninja V monitor. You can sync and/or control 1000+ Ninja V units equipped with these modules on the same network at ranges up to 984\’ in efficient multicam shoots.
Additional information
Related Products:
DA-HDTV-USB Frame Grabber
IP Virtual Card
greenMachine HDR Evie+
LiveU LU600 HEVC – UBMS
Cosmos
Bluefish444 Synapse HDMI120 Mini Converter
Bluefish444 Synapse ANA140 Mini Converter
Bluefish444 Synapse SDI110 Mini Converter
TITAN Edge Decoder
Versal ™ Prime Series Gen 2...
ULTRA Sereis 4K/8K TICO Codecs &...
Alchemist Live IP
Alchemist Live from Grass Valley, a Belden Brand, offers the very best motion compensated framerate conversion, providing transparent, artifact-free conversion for seamless global distribution of live media.
';
Neuron IP processing
';
ETH-LANC Link
Control your Sony cameras such as FS5, FS7 and other LANC compatible cameras (any camera the Sony RM-BP30 supports). Or use the ETH-LANC Link to control Canon cameras that speaks the RC-V100 Protocol such as the C Series, XF Series and ME Series.
Features
- 2.5 mm connector
- LANC Protocol or Canon RC-V100 Protocol
- Camera Selector
- Ethernet with PoE (IEEE802.3af)
- Made in Denmark
';
FastTICO-XS SDK
Available for CPU or GPU, implementing the newJPEG-XS standardand many more features, the intoPIX FastTICO-XS SDKs provide the highest quality, lowest latency, visually lossless codec for the optimization of your application. FastTICO-XS SDKs are perfect for all professionals looking to deploy ultra-low latency, lossless encoding over their whole infrastructure and workflows.
Feature overview
Quality & latency
- Best-in-class visually lossless video codec , compliant with JPEG XS
- Adjustable compression ratio (on frame by frame) with constant bitrate throughput (CBR)
- From Lossless down to near-lossless / visually lossless
- Ultra-low latency capability (down to only few lines in CPU) with an optimal API
- Optimized for real-time operations
Processors (CPU / GPU)
- Highly parallelized processing in encode/decode
- x86-64 Intel / AMD CPU (SSE 4.1, AVX2 or newer) in CPU
- Nvidia GPU (CUDA)
Image formats & frame rates
- Supports monochrome (4:0:0, Alpha) up to 16bit,
- Support 4:2:2 and 4:4:4 8/10/12 bit
- Validated up 8K UHDTV-1 (8192)
- Frame rate depends on CPU/GPU performance & SDK packages
Compression
- Compliant with JPEG XS standard & profiles
- Additional advanced features by intoPIX improving performances & quality.
Rate control
- Adjustable compression rate
- Constant (predictable) bitrate (CBR)
Operating systems
- Windows & Linux (32-bit/64-bit) + macOS (64 bit)
Add-ons
- Embedded Downscaler Add-On: Proxy x1 & x2 decoding (ie. decode directly HD resolution or 4K resolution from 8K XS-compressed video stream) and reduce your CPU or GPU load.
- FFmpeg Add-On : connect directly the intoPIX SDK to FFmpeg
- Insertion/Extraction of Color Specification box / Video Support box from JPEG-XS part 3
- SDI Mapping Add-On: enables users to map 4K/8K effciently over existing 3G/HD-SDI cables. This unique feature reformats the XS codestream to fully map the SDI active area avoiding the forbidden EAV/SAV codes, offering a 20% gain of compression/quality performances.
';
DA-HDTV-USB Frame Grabber
- This compact box - with a magnetic bottom for an easy installation on a metal surface or using the supplied mounting plate, accepts HDMI or SDI input signals and streams them to its USB 3.1 output.
- It accepts HDMI 2.0 signals video resolutions up to 4K/UHD 60 Hz (4:4:4) and SDI signals up to 3G-SDI (1080p60) and has loop out outputs for both. The USB 3.1 streaming output maximum resolution is 1080p60 (meaning that 4K/UHD signals are down converted to 1080p).
- It works with software media players such as VLC and other conferencing applications. It is very easy to set up: Just connect it, launch the media player or conferencing application and select the device as audio and video source. You can then record or stream the DA-HDTV-USB video and audio signals. It is compatible with Windows, MAC and Linux computers.
- It has a mic input allowing to mix voice with the input audio and a speaker output allowing to check the audio output.
- All the necessary cables and accessories are supplied as standard.
';
Kiloview P3
Upgraded H.265 encoding capability and perfectly adaption to KiloLink Server ensure the best quality of multi-protocol live streaming and video transmission."
';
IF8K-UCN
The IF8K-UCN is a frame synchronizer that supports upconversion of HD/4K UHD to 8K DG (Dual Green). It inputs HD-SDI or quad-link 3G-SDI (3G-SDI x 4) and outputs octa-link 3G-SDI (3G-SDI x 8) signals. Two-way distribution of 8K DG is standard and BB or Tri-level sync reference input is also supported. It is designed and manufactured by InSync Technology for exclusive distribution by FOR-A.
The IF8K-UCN is an ideal solution for integration of HD or 4K UHD material into 8K UHD productions using the dual-green format.
Key features:
- Frame synchronisation to an external reference with tracking PCM audio delay
- Minimum delay mode (no reference) – lock to input
- Very high quality upconversion with filter control.
- Conversion between 59.94 and 60Hz conversion (Drops or repeats 1 frame in 1000 frames)
- Optional remote control via IF8K-REMOTE
';
IF8K-FSCC
The IF8K-FSCC synchronizes full 8K video with both 12G-SDI and 3G-SDI signals. Asynchronous input of quad-link 12G-SDI (12G-SDI x 4) or 16 link 3G-SDI (3G-SDI x 16) for 8K can be synchronized by the external reference input and output with quad-link 12G-SDI. It is designed and manufactured by InSync Technology for exclusive distribution by FOR-A.
The IF8K-FSCC is an ideal solution for 8K synchronisation and colour correction. It’s especially valuable where perfect synchronisation without audio disturbance is needed in live 8K productions.
Key features:
- Video signal processing of the luminance level, chroma level, chroma phase, and black level
- Colour corrector to set white balance, black balance, and color gamut
- Horizontal/vertical phase adjustment by the external reference input
- Additional audio delay for upstream or downstream equipment for each audio channel
- MADI audio input/output interface
- Optional remote control via IF8K-REMOTE
';
IP Virtual Card
Besides the well-known VideoMaster SDK dealing with the DELTACAST I/O cards and FLEX products, the DELTACAST portfolio now includes a new SDK (Software Development Kit) component called the IP Virtual Card, offering a new programming interface named VideoMaster IP.
The IP Virtual Card is a new video and multimedia programming interface allowing the use of 3rd-party computer network cards to capture and stream out video just like you are used to do over any DELTACAST card.
Designed from the ground up to allow high-performances multimedia capture and streaming using an off-the-shelf network card, the first version ofthe IP Virtual Card targets ST2110 connectivity.
The IP Virtual Card brings in support for video transport as per ST2110-20, audio transport as per ST2110-30, and ancillary data transport as per ST2110-40. It also includes a PTP synchronization solution compliant to ST2059-1. Thanks to an optimized network stack, the IP Virtual Card insures accurate, PTP locked, media streams compliant to ST2110-21 Type W senders, and it allows implementing ST2110-21 Type A receivers.
The IP Virtual Card implements an optimized network stack based on the operating system sockets, so that it is compatible with any NIC brand and model, and so that it can be used under Windows and Linux, and also targetting virtualization environments and execution in containers. For most demanding applications, the IP Virtual Card also exists in a version based on the DPDK kernel bypass.
Using the IP Virtual Card features requires installing a license. Please contact us for further details about this.
';
greenMachine HDR Evie+
The greenMachine HDR Evie+ (Enhanced Video Image Engine), 1 RU half 19” rackmount, is a real-time segmented frame-by-frame broadcast-quality High Dynamic Range (HDR) to Standard Dynamic Range (SDR) converter, with frame sync supporting formats up to 4K UHD (3840x2160). It is the world’s first system that uses the advanced algorithm for sectional dynamic tone mapping, which automatically analyzes different sections of an image in HDR stream and applies optimal corrections on a frame by frame basis in real-time. This unique capability is unlike any other solution today. It is the perfect real-time production tool for sports or any live broadcast event needing high-quality real-time HDR to SDR conversions. HDR EVIE+ fits best in the single native HDR workflow reducing the cost of equipment and manual operations.
The sectional dynamic tone mapping technique is applied to several spatial areas (sectors) in the image. In this type of tone mapping technique, the algorithm adjusts the signal by using several dynamic curves, one per image segment/sector. The algorithm then combines the result with global dynamic curves based on the entire image. While the dynamic curves of the different sectors are perfectly adapted to the respective image content of their segments, the global curve is perfectly adapted to the content of the entire image. Depending on the image content within these sectors, the algorithm reacts dynamically, which allows lights and shadows to be treated independently. Therefore, dark areas can be brightened, and the bright areas can be darkened without getting a flat gradation of the image. “
HDR EVIE+ provides a 1x 4K/UHD processing channel supporting down-conversion from HDR transfer characteristics to SDR through appropriate sectional dynamic tone mapping. It also supports the Wide Color Gamut (WCG) needs of broadcasters and professional AV live events requirements. HDR Evie+ package also includes HDR Static configuration for Static HDR SDR conversions, which performs static tone mapping to realize UP/Down/Cross conversions between HDR and SDR, suited best for the studios or the environments where the light conditions do not change dynamically.
';
LiveU LU600 HEVC – UBMS
The LU600 is LiveU’s flagship portable transmission unit for global newsgathering, live sports and events coverage. Combined with the 4K HEVC Pro Card, the LU600 delivers unparalleled video performance with extreme bandwidth efficiency – in one of the smallest portable cellular bonding units in the market.
ULTIMATE VIDEO QUALITY
The LU600 HEVC delivers the highest video quality and bitrate in the market (up to 20Mbps), fastest file transfer (60Mbps) and lowest delay.
Using the LU600 HEVC, broadcasters can provide the same video quality as H.264 while using about half the bandwidth, or offering greatly improved video quality wherever original H.264 bitrate is maintained.
BUILT FOR YOUR NEEDS
Tailored to the needs of mobile journalists, the LU600 HEVC product suite offers three configurations, including: HD, 4K-HDMI and 4K-SDI.
The unit comes in a specially designed smart backpack, with improved usability, remote control functionality and easy access to display, controls and interfaces.
ADVANTAGES
- Superior 1080/4K video quality based on broadcast-grade hardware encoding – supporting VR and 360 degree applications
- Very low power consumption, with 4 hours of battery time
- Dynamic bitrate and resolution changes on the fly
- HEVC and H.264 file encoding capability for production workflows
- ‘Live & Store‘, allowing broadcasters to go live under any network conditions while simultaneously saving a high-quality copy of the live video for future purposes.
- High speed bonded internet capabilities
- 5” LCD with ultra-responsive capacitive touchscreen
';
Smart-telecaster Zao-S
The Zao-S is a portable video H.265 HEVC encoder that compresses video in real-time, enabling full HD live video streaming to anywhere from anywhere, all while on the move. The equipped H.265 video compression is the most efficient standard for encoding and compression on the market today. As a result, the Zao-S enables constant HD video quality, low latency, and the freedom to transmit live video from across the globe. The Zao-S is made in Japan and features the high quality craftsmanship that Japanese products are known for. The Zao-S is constantly being improved as our engineers develop new features and increase its capabilities.
Sophisticated Multi-Network Bonding Technology - RASCOW
The Zao-S allows up to 3 external USB modems to be bonded together to form a single connection via 4G, 5G, Wi-Fi, and/or satellite. When transmitting video live over the mobile network, many factors such as the carriers being used, cell tower locations, and varying bandwidth levels affect video quality. Our proprietary protocol, RASCOW, monitors these factors along with the changing mobile signal strength in real-time and adapts the most optimum bonded combination of the network connections. The Zao-S, with the RASCOW protocol, continues to reliably send high quality video even when signal strengths become low or fluctuate rapidly.
Sleek. Compact. Mobile.
The Zao-S maximizes mobility without sacrificing quality. Due to its lightness (about 350g) and portability, the Zao-S can be carried with a body strap or be mounted on a camera. The compact design, and one hour internal battery, make the Zao-S an excellent choice for drone applications as well.
';
Cosmos
Cosmos provides software based playout engines for Broadcasters, Over The Top service providers and Broadcast Services companies.
The distributive virtualised architecture of the playout engine from Cosmos provides a fast and trusted cloud based playout solution enabling broadcasters and service providers to spin up both OTT and traditional TV channels in a few minutes thus lowering the cost of ownership.
Channels can be hosted from data centres or from your own Master Control Room over a private or public cloud. Cosmos also gives you the ability to playout both file based and live services .
Cosmos is an open system which enables all the features of a playout engine be implemented on a service basis. Cosmos reduces the need to invest in capital infrastructure. It removes the need to find space for technical equipment and the ongoing cost of technical maintenance.
Channel owners in worldwide gain the freedom to outsource practically all the technical equipment traditionally required for broadcasting.
Cosmos virtualises the process of channel management under control from a standard enterprise computer via a firewall-protected secure internet connection. Programme playout can be automated to any required extent while always retaining the freedom to insert live content.
Cosmos offers established broadcasters and content owners the ability to introduce new programme channels at very short notice, whether a permanent additional to an existing bouquet or a supplementary programme stream covering a temporary event. It can be matched to a wide variety of deployment models, enabling consistent operation across baseband, hybrid IP, and virtualised, cloud-based networks.
Cosmos also enables independent content producers to establish television channels without the high start-up cost usually inherent in such ventures.
Cosmos delivers unsurpassed flexibility in format handling and transcoding. It supports practically any technical standard in today's fast-evolving television industry, whether for terrestrial, satellite or online viewing, live, near-live or catch-up.
';
Kiloview E3
';
Kiloview N5/N6
Featured with powerful functions such as PoE, LCD display with big-sized tally, PTZ control, 3.5mm audio line in/out, multi-channel audio, intercom and centralized management, N5/N6 is the easiest and most cost-effective way to get access to the fabulous NDI world for low latency and high image quality.
N5: 3G-SDI I/O
N6: 1080P HDMI I/O
';
TICO-XS IP cores
TICO-XS is a smart upgrade path to manage higher resolutions (4K, 8K, …) and frame rates while assuring visual quality, keeping power and bandwidth at a reasonable budget and significantly reducing the complexity and cost of a system, a chip or an infrastructure.
Applications:
From 3G-SDI to IP in 4K
The mapping of the TICO-XS mezzanine compression to carry UHDTV 4K 60P over a single 3G-SDI cable has been specified in the SMPTE RDD35. intoPIX provides the needed building blocks to create a 4K over 3G-SDI solutions. Have a look at the intoPIX TICO-XS IP-cores and peripheral IP to map the compression over SDI.
4K with TICO compression over SMPTE2022-6
As SMPTE ST2022-6, defines the transport of HD-SDI or 3G-SDI over IP, using TICO-XS, it is easy to leverage an existing SMPTE 2022-6 system to carry up to three UHDTV 4K 60P streams over a single 10 GbE port using the SMPTE 2022-6 standard.
SMPTE 2110 and TICO compression
SMPTE ST2110-22 specifies the transport of compressed video over IP (including JPEG-XS), enabling you to transport any video formats over IP with full flexibility and all the benefits of TICO-XS compression.
8K over a single 10GbE
It has already been proven. TICO-XS can enable you to carry with lossless quality a 8K 60fps video stream over a single 10GbE link using TICO RTP payload and a SMPTE 2110-22 transport.
8K over a single 12G-SDI
It has already been proven. TICO-XS can enable you to carry a 8K 60fps video stream over a single 12G-SDI link with lossless quality.
';
TCP Link for ATEM
BlackMagic Design ATEM switcher has no TCP interface for easy integration with AV-systems, so SKAARHOJ has created this tool, the TCP Link for ATEM, which provides just that: A simple TCP interface to almost any feature in the switcher. It will report state changes of the switcher and accept and forward commands to the switcher. Exactly what you need for AV projects with various AV systems like Crestron, Extron, and so forth. Connect to the device via TCP, then change the desired command on the ATEM switcher and the TCP Link for ATEM will output in the terminal how the command looks that you can use to send the same command to the switcher.
Features
- Small rugged form factor
- Report state changes
- Send commands to ATEM Switcher
- Connect via TCP
- Made in Denmark
';
ETH-SDI Link
Receives “UDP Camera Control” information over Ethernet and forwards it on the SDI out connector.
Used to merge network data from multiple RCPs onto a single SDI wire.
Features
- BlackMagic 3G-SDI for ETH-SDI Link
- Alternative Firmwares for ETH-SDI Link
- Single Controller multiple returns
- Multiple Controller single return
- Made in Denmark
';
ETH-GPI Link
Setting up an I/O device have never been this flexible. Connect and control anything from your tally lamps, trigger ATEM switcher routines, control a HyperDeck, change Scopes on a SmartScope Duo and route inputs/outputs on a VideoHub. Defining parameters – single or multiple - for inputs/outputs is extremely fast, thanks to the drop-down menu structure in UniSketch OS. Connect and control up to 8 devices at the same time!
The general-purpose I/O controllers offer 8/16 inputs and 8/16 outputs, all electrically separated with quality relays and optocouplers. GPO is implemented with relays shorting to GND. GPI implemented with optical isolators shorted to GND.
Please notice: SKAARHOJ Controllers with GPI inputs accept open collector and relay outputs (pulled to GND). The default HD15 tally connector on the TriCaster TC1 does not provide a direct working signal to the ETH-GPI Link. Converting the 5V potential to GND is needed.
Features
- 1 x DB25 Connector Configuration
- 8 GPO
- 8 GPI
- Ethernet with PoE (IEEE802.3af)
- Made in Denmark
';
TITAN Mux
It can be easily incorporated into any existing headend for supporting digital turnaround services.
The TITAN Mux scalable design reduces deployment time, enables adding new services on the fly and support any video, audio and data service.
TITAN Mux can be controlled by PILOT Manager and easily integrate to any NMS using REST API. TITAN Mux is a true hardware and OS agnostic solution running on any server, any form factor, bare-metal OS as well as any cloud environment.
It includes support for IP input/output and egacy ASI links using PCIe ASI cards.
TITAN Mux eliminates operational headaches and ensures high scalability, flexibility and availability.
Download the datasheet: https://www.ateme.com/product-titan-software/#resources
';
TITAN Edge Gateway
Based on TITAN’s software modular suite and leveraging full COTS approach, TITAN Edge is a versatile solution for operations running on-premises, off-premises or a combination of the two: High HD density, 4K, Satellite/ Terrestrial/IP reception, Over-the-Air or scrambled sources, Gateway, IP Turnaround.
Implementing state-of-the-art SMPTE 2022 standards, TITAN Edge Gateway is the first professional cloud native solution im-provable to support full IP video contribution & distribution in the cloud.
In addition, TITAN Edge Gateway features interfaces to standard PCIe boards to sup-port any type of use-case and build the most adapted and efficient solution for on- pre-mises reception.
The TITAN Edge Gateway features advanced ARQ solutions with failover of any input type to be descrambled and forwarded to any output type making it a comprehensive solu-tion to contribute from/to the cloud.
Key Features
- Any to Any input failover matrix
- Solution for Any input to Any output types
- Multi DVB-Common Interface option
- BISS-CA decryption system support
- Service filtering with remuxed output
- BISS-CA MPTS scrambling over any ouput
- Contribution over Internet support
- Video Transcoding, Framerate converter
- On-premises/off-premises/Cloud solution
Download the datasheet: https://www.ateme.com/product-titan-software/#resources
';
Bluefish444 Synapse HDMI120 Mini Converter
The HDMI120 Synapse Mini Converter is Bluefish444’s SDI to HDMI video and audio signal processor for professional video workflows. The Synapse HDMI120 allows conversions from SDI signals to HDMI, and AES/ANA/SDI embedded audio input to HDMI embedded audio output.
Featuring the same high-quality standards as our video cards, the Synapse Mini Converter range offers a range of conversions, video scaling and PsF mode via configurable DIP switches, and an HDMI copy input & SDI copy output for redundancy.
Easy-to-use
- DIP switches allow for configuration of converter
Maximum Connectivity
- HDMi input with 8 channels of embedded audio
- Second HDMI input for redundancy
- 2 x 3G/HD/SD-SDI Outputs
- AES digital stereo audio input
- Analogue stereo audio input
';
Bluefish444 Synapse ANA140 Mini Converter
The ANA140 Synapse Mini Converter is Bluefish444’s analogue to SDI video and audio signal processor for professional video workflows. The Synapse ANA140 allows conversions from Composite, Component SD/HD, and S-video signals to 3G-SDI, and AES/ANA audio input to SDI-embedded audio output.
Featuring the same high-quality standards as our video cards, the Synapse Mini Converter range offers a range of conversions, video scaling and PsF mode via configurable DIP switches, and an SDI copy output for redundancy.
Easy-to-use
- DIP switches allow for configuration of converter
Maximum Connectivity
- Composite Video input
- Component Video input
- S-video input
- 2 x 3G/HD/SD-SDI Outputs
- AES digital stereo audio input
- Analogue stereo audio input
';
Bluefish444 Synapse SDI110 Mini Converter
The SDI110 Synapse Mini Converter is Bluefish444’s SDI to HDMI video and audio signal processor for professional video workflows. The Synapse SDI110 allows conversions from HDMI video signals to 3G/HD/SD SDI, and SDi-embedded audio input to HDMI embedded audio, AES digital stereo or Analogue stereo audio output.
Featuring the same high-quality standards as our video cards, the Synapse Mini Converter range offers a range of conversions, video scaling and PsF mode via configurable DIP switches, and an SDI copy input and output for redundancy.
Easy-to-use
- DIP switches allow for configuration of converter
Maximum Connectivity
- 3G/HD/SD-SDI input with embedded audio
- Second 3G/HD/SD-SDI input for redundancy
- SDI loop output
- HDMI output
- AES digital stereo audio output
- Analogue stereo audio output
';
TITAN Edge Decoder
Based on TITAN’s software modular suite and leveraging full COTS approach, TITAN Edge is a versatile solution for operations running on-premises, off-premises or a combination of the two: High HD density, 4K, Satellite/ Terrestrial/IP reception, Over-the-Air or scrambled sources, Gateway, IP Turnaround.
Implementing state-of-the-art SMPTE 2022/2110 standards, TITAN Edge Decoder is the first professional cloud native low laten-cy solution enabling full IP video operations in the cloud.
In addition, TITAN Edge Decoder features interfaces to standard PCIe boards to sup-port any type of use-case and build the most adapted and efficient solution for on-pre-mises reception.
The TITAN Edge Decoder features advanced ARQ solutions with failover of any input type to be descrambled, decoded or forwarded to any output type making it a comprehensive solution to contribute from/to the cloud.
Key Features
- SD/HD/UHD HEVC, H264, MPEG2, J2K
- Decoding up to UHD 4:2:2 12-bit
- BISS-CA decryption system support
- Low latency mode
- Confidence Audio / Video input monitoring
- DVB-Common Interface option
- Decoder output up to 12G-SDI
- SMPTE 2110 & JPEG-XS Output
- HDR/LUT conversions
- Contribution over Internet support
- On-premises/off-premises solution
Download the datasheet: https://www.ateme.com/product-titan-software/#resources
';
Versal ™ Prime Series Gen 2 adaptive SoCs
Designed for a broad range of applications including 8K video processing, the Versal Prime Series Gen 2 devices offer expanded hardened IP to complement the programable logic and processing system. This new IP includes hardened video encode & decode, DDR5/LPDDR5X memory controllers, 100G Ethernet, PCIe® Gen5, and an integrated Arm Mali™-G78AE GPU, enabling next-generation applications within tight area & power constraints.
From capturing content and enabling virtual production to creating live events, Versal Prime Series Gen 2 enables Broadcast and Pro AV equipment suppliers to deliver ever more compelling experiences thanks to a unique combination of dedicated acceleration, flexible interfaces, and adaptive computing that’s ideal for real-time video & audio processing.
Each video codec unit (VCU) tile offers:
- Hardened bidirectional encoding, decoding and transcoding
- Support for HEVC & AVC up to 4K60, 4:4:4, 12-bit
- Up to two VCU tiles per device; aggregate both tiles for limited 8k30 support
';
Master Sync Generators
The SRG-series Master Sync Generators support a wide range of output signals and formats from composite to UHD. These reference generators can even provide multiple video standards simultaneously. Integrated video pattern generators with idents and motion are great for remote feeds.
Built to last and redundancy in mind, Ross Sync Generators will keep the heartbeat of your facility alive. All units feature redundant power and easy servicing. Automatic changeover units are available to ensure you never skip a beat.
';
GearLite
Gearlite point-of-use modules let you put them right where you need them. Every GearLite module ships standard with flexible mounting accessories and a universal power supply. They feature a compact design, so they fit almost anywhere, be it in a rack, on stage, behind a monitor or in a fly pack.
Small and compact doesn’t mean you need to settle for lower-grade processing. Our GearLite mini converter and distribution modules are built using the same high quality components and processing as our modular solutions, giving you broadcast-grade signal handling for SDI, 3G-SDI, 12G-SDI, fiber, audio and HDMI.
';
Evertz
Fiber Optics, CC, Multiviewers
RF Routing
Modular Products
PHASE - Serving the Brazilian Television Market since 1980
';
Video Connect
Our video network platform is designed specifically for the optimal transport of video content and can receive and deliver signals of any format. Our expansive global reach, coupled with the ability to transport secure, broadcast-quality video over public IP, means we can reliably distribute content anywhere in the world.
CONNECT TO LEADING BROADCASTERS
GTT is located in the world’s most prominent studios, distribution head-ends, transmission facilities, teleports, public switches and data centers. We can provide direct, private and secure connectivity, ensuring the highest possible performance for your mission-critical content and services.
LOWEST LATENCY FOR LIVE VIDEO
For live interviews, remote production, or delivery to online gaming platforms, you need a high-speed, dedicated network path that you can rely on for seamless video transport. GTT owns and operates many low-latency routes, including the fastest fiber optic path between North America and Europe.
';
CX-4
CX-4 Transport stream converter.
The CX-4 is a flexible 1U unit containing four independent transport stream converters, each of which can be user configured to convert between Transport Streams over IP to Asynchronous Serial Interface (TSoIP to ASI) or Asynchronous Serial Interface to Transport Streams over IP (ASI to IP). This flexibility ensures your capital costs to a minimum as you can be sure you always have the correct converter to hand.
Complying with both the DVB and SMPTE2022 standards the TSoIP interface supports Transport stream encapsulation, forward error correction and UDP/RTP de-encapsulation as defined by the SMPTE 2022 specification. Hence allowing you to match the resilience of your stream to the performance of your network.
This professional product is designed for easy and reliable operation. It is controlled via a GUI using the onboard web server which is on a separate IP interface to the TSoIP signals. The chassis is fitted with dual power supplies and adequate ventilation to ensure for reliable service in the broadcast environment.
For added flexibility the unit can be configure at manufacture with any combination of one to four converters.
Applications: For use in Terrestrial, Cable and Satellite broadcast systems.
';
BD30AV-UHD
';
VICO-4L
Key features:
- Low latency 32 video lines fixed delay, or according to Genlock/FrameSync
- Compression ratio 4:1(4K3G-SDI), 8:1(4KHD-SDI)
- High image quality high peak signal to noise ratio (PSNR)
- Standardized SMPTE RDD 35 (TICO Alliance)
- 1 RU rack mount size (max dual channel)
Application areas
- Contribution
- Storage cost reduction to storage 1/4. 1/8
- OEM board can be provided
Technical specifications
SDI input BNC 75Ω 3G-SDI Level A 2SI, 12G-SDI Chroma 4:2:2 Bit Depth 10Bits Frame rate 50P(4:1 only), 59.94P, 60P Encoder input 4K (4 x 3G-SDI), 4K(1x12G-SDI) Decoder output 4K (4 x 3G-SDI)、4K(1x12G-SDI) Signal split mode INTER(2SI: 2 sample interleave division) Dimensions (ｍｍ) 435W x 260D x 44.5H Power supply AC 100～240V Power consumption 30VA Weight About 3.0Kg Operation temperature ０～35℃ Operation humidity 20 to 80% RH * No condensation
';
UHD Scaling Cross Converter
THEFINE's UHD Scaling Cross Converter
[Features of TFC-21Q3 & TFC-21CC]
';
Atomos AtomX Modules
The AtomX Ethernet/NDI Expansion Module for Ninja V from Atomos provides a GigE connector supporting NDI input and output with encode, decode, control, and sync capability, allowing you to transmit, distribute, or receive and monitor NDI from any NDI source. The module connects to the Ninja V\'s AtomX expansion port. After it\'s attached, it also becomes the Ninja\'s battery plate. It accepts the Ninja\'s battery, which then powers both devices at the same time.
The AtomX SYNC Expansion Module for Ninja V from Atomos adds wireless timecode, sync, and Bluetooth control to the Ninja V monitor. You can sync and/or control 1000+ Ninja V units equipped with these modules on the same network at ranges up to 984\' in efficient multicam shoots.
';
Atomos Connect Converters
The Atomos Connect Convert line comes colour coded and forms a comprehensive and versatile lineup of 15 different conversion, signal processing and system integration boxes that connect, convert, scale, sync, split and repeat your video signals. The new lineup of Connect converters is not to be confused with the already existing Connect H2S HDMI to SDI and visa versa. The new lineup of Connect Convert devices feature a robust construction with locking DC and HDMI connectors, USB power and detachable mounting ears. Status is clearly displayed on bright LEDs and they can be quickly and easily configured using the free ConnectOS software.
';
ULTRA Sereis 4K/8K TICO Codecs & Converters
';
